VMware VCENTER APPLICATION DISCOVERY MANAGER 6.1.1 -... Instruction Manual

Application Discovery Manager
Administration Guide
vCenter Application Discovery Manager 6.1.1
This document supports the version of each product listed and
supports all subsequent versions until the document is replaced
by a new edition. To check for more recent editions of this
document, see http://www.vmware.com/support/pubs.
EN-000451-01

VMware, Inc.
3401 Hillview Ave.
Palo Alto, CA 94304
www.vmware.com
2VMware, Inc.
Application Discovery Manager Administration Guide
You can find the most up-to-date technical documentation on the VMware Web site at:
http://www.vmware.com/support/
The VMware Web site also provides the latest product updates.
If you have comments about this documentation, submit your feedback to:
[e-mail]
Copyright © 2010 VMware, Inc. All rights reserved. This product is protected by U.S. and international copyright and
intellectual property laws. VMware products are covered by one or more patents listed at
http://www.vmware.com/go/patents.
VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks
and names mentioned herein may be trademarks of their respective companies.

VMware, Inc. 3
Contents
AboutThisBook 7
1Overview 9
SystemArchitecture 9
DistributedApplianceSolutions 11
VirtualandPhysicalApplianceSolutions 11
VirtualApplianceDeployment 11
PhysicalApplianceDeployment 12
MirroredNetworkTraffic 12
vCollector 12
MixedEnvironment 13
WhereToGoNext 13
InstallationofNeworAdditionalADMComponents 13
Licenses 13
UpgradingADM 13
MigratingtoaNewAppliance 13
Security 13
2InstallingADM 15
ADMInstallationRequirements 15
InstallationPersonnel 15
ESXResources 15
InstallingthevSphereClient 16
DisablingvMotion 16
PreparingtheEnvironment 17
PreparinganESXConfiguration 17
DeployingtheVirtualAppliances 18
DeployingtheADMVirtualAppliances 19
InstallingWindowsCollector 20
3SettingUpADM 23
Process 23
OrderofSetup 23
ADMSetupProcedures 23
LaunchingtheFirstBootConfigurationTool 24
ConfiguringtheRootPassword 24
ConfiguringStaticNetworkSettings 25
ConfiguringtheTimezoneandTime 25
ConfiguringtheApplianceRole 26
Post‐InstallationSteps 27
LoggingIntotheADMConsole 27
InitiatingPassiveDiscovery 27

Application Discovery Manager Administration Guide
4VMware, Inc.
4SecuringADM 29
ChangingtheRootPassword 29
ResettingtheADMRootPassword 29
OpenSSLSelf‐SignedTestCertificates 30
CASignedTestCertificates 30
Self‐SignedCertificates 30
5Maintenance 33
ADMServices 33
ProductSupportPackages 34
UsingtheADMConsole 35
UsingtheCLI 35
RestoringanADMEnvironmentbyUsingaProductSupportPackage 36
ReconfiguringanADMDeployment 38
AddingaRemoteDatabasetoanExistingADMDeployment 38
ConvertingaSingle‐BoxorAggregatortoaRemoteDatabase 38
MovingaDatabasetoaRemoteAppliance 39
Licenses 39
UploadingaLicense 40
6UpgradingADM 41
Overview 41
ApplianceType 41
MixedEnvironments 41
Licenses 41
ApplianceMigration 41
BackingUpData 41
UpgradingAppliances 42
ImportantNotes 42
PreliminaryProcedures 42
UpgradingAppliancesUsingCLI 42
Post‐UpgradeSteps 43
7MigratingtoaNewAppliance 45
Overview 45
SupportedMigration 45
Licenses 45
SystemArchitecture 45
Process 46
PreliminaryProcedures 46
DataRestoration 47
Single‐BoxSolution 47
DistributedSolutions 47
DistributedSolutionwithRemoteDatabase 48
Post‐MigrationSteps 48
8TroubleshootingADM 49
TroubleshootingADMbyUsingtheProductSupportPackage 49
TroubleshootingErrorMessagesDuringWMIDiscovery 49
DetailDiscoveryTroubleshooting 49
UsingADMConsole 50
WMI 50

VMware, Inc. 5
Contents
single.sh 50
snmpdump 53
nlcapture 53
9UninstallingADM 55
UninstallingtheADMAppliance 55
ATimeZones 57
BADMAPITutorial 59
APIFeatures 59
Insight_control 59
AsynchAPI 60
DumpAPI 60
BulkAPI 61
WebServicesAPI 61
Index 63

Application Discovery Manager Administration Guide
6VMware, Inc.

VMware, Inc. 7
TheVMwarevCenter™ApplicationDiscoveryManager(ADM)AdministrationGuideprovidesinformation
thattheadministratorsarerequiredtoinstallandconfiguretheADM.
Intended Audience
ThisdocumentispartoftheVMwarevCenterApplicationDiscoveryManagerdocumentationset,andis
intendedforusebysystemadministratorsandintegratorsresponsibleforinstallingADM.
TheinstallationproceduresinthisdocumentmustbeperformedbyITprofessionalsfamiliarwith
virtualizationandVMwaretechnologiessuchasVMwareESX™serversandrelatedvirtualandphysical
equipment.
VMware Technical Publications Glossary
VMwareTechnicalPublicationsprovidesaglossaryoftermsthatmightbeunfamiliartoyou.Fordefinitions
oftermsastheyareusedinVMwaretechnicaldocumentationgotohttp://www.vmware.com/support/pubs.
Document Feedback
VMwarewelcomesyoursuggestionsforimprovingourdocumentation.Ifyouhavecomments,sendyour
feedbackto[e-mail].
Technical Support and Education Resources
Thefollowingsectionsdescribethetechnicalsupportresourcesavailabletoyou.Toaccessthecurrentversion
ofthisbookandotherbooks,gotohttp://www.vmware.com/support/pubs.
Online and Telephone Support
Touseonlinesupporttosubmittechnicalsupportrequests,viewyourproductandcontractinformation,and
registeryourproducts,gotohttp://www.vmware.com/support.
Customerswithappropriatesupportcontractsshouldusetelephonesupportforthefastestresponseon
priority1issues.Gotohttp://www.vmware.com/support/phone_support.
Support Offerings
TofindouthowVMwaresupportofferingscanhelpmeetyourbusinessneeds,goto
http://www.vmware.com/support/services.
About This Book

Application Discovery Manager Administration Guide
8VMware, Inc.
VMware Professional Services
VMwareEducationServicescoursesofferextensivehands‐onlabs,casestudyexamples,andcoursematerials
designedtobeusedason‐the‐jobreferencetools.Coursesareavailableonsite,intheclassroom,andlive
online.Foronsitepilotprograms andimplementationbestpractices,VMwareConsultingServicesprovides
offeringsto helpyouassess,plan,build,andmanageyourvirtualenvironment.Toaccessinformationabout
educationclasses,certificationprograms,andconsultingservices,gotohttp://www.vmware.com/services.

VMware, Inc. 9
1
ThischapterdescribesthedifferentVMwarevCenterApplicationDiscoveryManager(ADM)architecture
solutionsandconfiguration.Thischapterincludesthefollowingtopics:
“SystemArchitecture”onpage 9
“VirtualandPhysicalApplianceSolutions”onpage 11
“vCollector”onpage 12
“MixedEnvironment”onpage 13
“WhereToGoNext”onpage 13
System Architecture
TheADMprovidessystemarchitecturesolutionstomeettherequirementsofdifferentenvironmentsas
showninFigure 1‐1.
Figure 1-1. ADM Components
VMwareprovidesADMononeormoreappliances.Themodeoftheappliancedetermineswhichcomponent
isrunning.ADMcomponentsaredescribedinTable 1‐1.
Overview 1
AggregatorDatabase Active
Discovery-Unix
Active
Discovery-Windows
Passive
Discovery

Application Discovery Manager Administration Guide
10 VMware, Inc.
Single-Box Appliance
InaSingle‐Boxappliancesolutionarchitecture,theADMcomponentsareenabledonasingleVirtual
Appliance(VA)asshowninFigure 1‐2.
Figure 1-2. Single-Box Appliance Architecture
Chapter 3providestheconfigurationinstructions.
Table 1-1. ADM Components
Component Description
ActiveDiscovery‐UNIX Collectsdatafromtheconfigurationobjectsinyourdatacenter.Thefollowingdiscovery
typesapply:
IPdiscovery:Amethodfordetectinghostsorotherconfigurationitemswitha
specificIPaddresswhenPassiveDiscoveryfailstodiscoverthem.
Detaildiscovery:ExtendstheinformationobtainedusingPassiveandIPDiscovery.
Itusescommonnetworkprotocolstoremotelyqueryserversinthemanaged
networkandobtainssupplementaryinformationaboutnetworkhostswhichis
addedtothedatabase.
ActiveDiscovery‐Windows AdiscoveryenginethatusesWMIbaseddiscoverypoliciesforperformingactive
discoveryonWindowsmachines.
PassiveDiscovery Passivelyobservesthenetworktrafficbyperformingadeep‐packetanalysistodiscover
applicationsandcomponentrelationshipsinphysicalandvirtualenvironments.
Italsoallowsyouto:
Mapdependencies.
Counttheactivityofthesedependencies.
Identifyservices.
Aggregator Receivesdatafromthediscoverycomponentsandreconcilesthedatabeforetransferring
ittothedatabasecomponent.Theaggregatoralsoprovidestheuserinterfaceforusing
ADMandistheintegrationpointforvariousintegrations,forexample,ERDB.
Database AnOracleRDBMSusedforstoringdiscovereddataandADMconfiguration.
Database
ESX1
ADM VM2
Active Discovery-
Windows
Runs on (Virtualization)
Logical monitoring
port connectivity
ADM Connectivity
Physical
switch 2
Physical
switch 1
Active Discovery-
Unix
Aggregator
Passive
Discovery
vSwitch
ADM VM1
Role = single-box
Role=Windows collector
(running Win2008
on any ESX)

VMware, Inc. 11
Chapter 1 Overview
Distributed Appliance Solutions
ThedistributedappliancesolutionhasatleastonedesignatedapplianceenabledasaCollector,andanother
applianceenabledasanAggregatorandDatabaseasshowninFigure 1‐3.
Figure 1-3. Distributed Appliance Solution
Virtual and Physical Appliance Solutions
YoucansetupADMeither:
OnyourESXorESXiserversasdescribedin“VirtualApplianceDeployment”onpage 11
OnexistingIBMphysicalappliances,onlyupgradingissupportedasdescribedin“UpgradingADM”on
page 13.
Virtual Appliance Deployment
ADMversion6.1.xisdeliveredasVA,whichisavirtualmachineimagethatincludesanoperatingsystemand
therelevantADMsoftwarecomponentsinstalledonit.AVAcanrunoneormultipleADMcomponents
dependingontheapplianceroleselected.
DeployingavirtualmachinetemplateinanOpenVirtualizationFormat(OVF)ontotheESXorESXiserver
createsanADMVirtualAppliance.Afterdeployment,poweruptheVAandthenconfigurethestandard
appliancesettings,network,anduserinformation.
NOTEInaDistributedwithremotedatabasesetup,thereisadesignatedappliancetohostthedatabase.Also,
PassiveandDetailDiscoverycanrunonsingleormultipleCollectors.
Database
ESX1
ADM VM6
Active Discovery-
Windows
vSwitch
Role = Windows Collector
(running Win2008
on any ESX)
ADM VM3
Passive
Discovery
Active Discovery-
Unix
Runs on (Virtualization)
Logical monitoring
port connectivity
ADM Connectivity
Physical
switch 2
Physical
switch 1
Aggregator
vSwitch
ADM VM1
Role = Aggregator
Role = collector
ADM VM4 ADM VM4
vSwitch
Role = Collector
ESX3
Active Discovery-
Unix
Passive
Discovery
Passive
Discovery
vSwitch
Role = Passive collector
ESX2
ESX4

Application Discovery Manager Administration Guide
12 VMware, Inc.
DownloadthefollowingartifactsfromtheVMwareWebsite:
http://downloads.vmware.com/Application Discovery Manager
CoreADMTemplate:AnOVFtemplatethatincludesallADMcomponentsexceptfortheWindows
CollectorandyoucanconfigureasAggregator,Aggregatorwithremotedatabase,Database,or
Single‐Box.
CollectorADMTemplate:AsmallerOVFtemplatethatincludesthePassiveCollectorandActiveand
PassiveCollectorandyoucanconfigureaspassiveandactivediscoveryCollectorandPassiveDiscovery
Collector.
WindowsCollectorInstaller:AnexecutablefilethatinstallstheWindowsCollectorcomponentontopof
theWindows2008R2operatingsystems.
Physical Appliance Deployment
ADMsupportstheupgradingofexistingIBMsingleboxandDistributedsolutions(includingthosethatuse
aremotedatabase).
Mirrored Network Traffic
Themethodinwhichtheapplianceperformspassivediscoveryisbyanalyzingmirroredtrafficfromaswitch
orrouter.Networkdevicesthathavetheabilitytoconfigureamirroredport(sometimescalledasaSwitched
PortAnalyzer,spanportormonitorport)canforwardacopyofallthenetworktrafficfromall(orselected)
portstooneormoremirroredports.Typically,eachnetworkdevicehasallitsportsmirroredtooneport.These
mirroredportsarethenconnecteddirectlytooneofthenetworkinterfacesontheESXserver.
Performoneofthefollowingstepsifyouhavetoconnectmultiplemonitorports:
Connectthemonitorportstoanaggregateswitch(A‐Switch),whichisalsoconfiguredwithamonitor
port.PlugthemirroredportoftheA‐SwitchintotheESXservernetworkinterface.
ContactyourVMwareSalesRepresentativeifyourequireanA‐Switch.
AddfewmorenetworkinterfacestoESXserver.
InstallanotherADMPassiveCollectoronadifferentESXserver.
vCollector
TheADMusesavirtualcollector(vCollector)tolistentocommunicationbetweenvirtualmachinesthatrun
onthesameVMwareESXServer.AvCollectorispresentinsideavirtualmachineanditslistenercollectsthe
informationaboutthevirtualmachinesdeployedontheESXServer.BydeployingavCollector,theADMis
abletopassivelydiscoverdependenciesinavirtualizedenvironment.Youcanthenviewinformationabout
thevirtualmachinesthataredeployedonthesameESXServerincluding:
Dependencymapsbetweenvirtualmachines.
Activitycountsofthedependencies.
Servicesrunningonthevirtualmachines.
Additionalinformationthatisofferedbythelistener.
IMPORTANTConsultITprofessionalsofyourorganizationtoensurethattheappropriateswitchesorrouters
thatcontainsthenetworktrafficisusedforDiscoveryareconfiguredproperlyforportmirroringandare
accessibletotheADMappliance.
NOTETheADMPassiveCollectorcanworkwithmaximumofthreemonitorports.Ifyouhavetoconnect
morethanthreemonitorports,youmustaddanotherADMPassiveCollector.

VMware, Inc. 13
Chapter 1 Overview
Mixed Environment
TheADM6.1.xreleaseintroducesADMasavirtualappliance,butitalsosupportsupgradingfrom6.0ona
physicalIBMappliances.Youcanupgradeyourphysicalenvironmentwithadditionalvirtual6.1.xappliances
likemixedenvironment.ThisadditionalvirtualappliancecanplayaroleofPassiveCollectors(vCollectors)
oranadditionalPassiveandActiveCollectors.
.
Where To Go Next
Thissectionprovideslinksthatcontainsmoreinformationonthetopicslisted.
Installation of New or Additional ADM Components
ContinuebyconfiguringinitialappliancesettingsasdescribedinChapter 2.
Licenses
YouneedanewlicensetouseADMafterupgradingormigrating.ObtainthelicensefromyourVMwareSales
representative.Formoreinformation,see“Licenses”onpage 39.
Upgrading ADM
ContinuewithupgradeproceduresasdescribedinChapter 6.
Migrating to a New Appliance
ContinuewithmigrationproceduresasdescribedinChapter 7.
Security
FormoreinformationonADMsecurity,seeChapter 4..
NOTEAllADMappliancesthatparticipateinmixedenvironemntmodemustrunthesame6.1.xversionof
theADM.

Application Discovery Manager Administration Guide
14 VMware, Inc.

VMware, Inc. 15
2
ThischapterdescribesinstallationanddeploymentoftheADM.Thischapterincludesthefollowingtopics:
“A D M InstallationRequirements”onpage 15
“DisablingvMotion”onpage 16
“PreparingtheEnvironment”onpage 17
“DeployingtheVirtualAppliances”onpage 18
“InstallingWindowsCollector”onpage 20
ADM Installation Requirements
ADMisanappliancethatcanruninaVMwareinfrastructure.Thissectioncontainsrequirementsthatmust
bemetbeforeyouinstallandusetheADMappliance.
Installation Personnel
TheinstallationproceduresinthisdocumentmustbeperformedbyITprofessionalsfamiliarwith
virtualizationandVMwaretechnologiessuchasESXserversandrelatedvirtualandphysicalequipment.
ESX Resources
TousetheADMappliance,youmustinstalltheADMapplianceonaVMwareESXserverversion3.5orlater.
ConfigurethevirtualmachineonyourESXserveraccordingtothedeploymentmodelwithresourcesas
describedinTable 2‐1.
Installing ADM 2
Table 2-1. Virtual Appliance Deployments
ADM Virtual Appliance (VA) Memory (GB) Number of vCPUs NICs Disk (GB) OVF Template
Single‐Box 4 4 4 80 Core
Aggregator+DB 4 4 1 80 Core
Aggregator 3 2 1 80 Core
Database 3 2 1 80 Core
PassiveCollector2 1 4 8 Collector
LinuxActive+PassiveCollector 4 2 4 8 Collector
WindowsActiveDiscovery
Collector
21 120NA
NOTEVMwareprovidesWinApeinstallerinsteadofOVFtemplateforWindows2008R2(Datacenter,
Enterprise,andStandard)operatingsystemsthathoststheWinApe.

Application Discovery Manager Administration Guide
16 VMware, Inc.
Installing the vSphere Client
InstallthevSphereclienttoworkwithVMwareenvironment.
To download and install the vSphere Client
1 LaunchInternetExplorerbrowser.
2Intheaddressbar,typetheIPnumberoftheESXServerwherethevirtualmachineisinstalled,for
example:
https://ESX Server IP
3ClicktheDownloadvSphereClientlink,andthensavetheclientexecutablefiletoyourlocalharddisk.
4Runtheexecutablefile.
5AcceptthelicenseandclickNext.
6Typetheusernameandorganizationdetailsiftheydonotappearbydefault.ClickNext.
7Atthenextscreen,clickNextwithoutselectingInstallvSphereHostUpdateUtility.
8Ifdifferentfromthedefault,specifytheinstallationfolder,andthenclickNext.
9ClickInstall.
10 ClickFinishtoclosethewizard.
Disabling vMotion
To disable automatic vMotion
1InthevSphereclient,selectthecluster,right‐clickonitandselectEditSettings.
2IntheVMwareDRSsection,selectVirtualMachineOptions.
3 SelecttheADMvirtualappliances.
4 SelectDisablefromtheAutomationLevellistbox.
5ClickOK.
NOTEADMsupportsWindowsInternetExplorer6.0andlaterbrowsers.
NOTEThevSphereclientinstallationcantakeseveralminutes.
IMPORTANTADMvirtualappliancesarenotsupportedbyvMotion.IftheADMvirtualapplianceisinstalled
onaVMwareDRScluster,performthefollowingstepstodisableautomaticvMotion.

VMware, Inc. 17
Chapter 2 Installing ADM
Preparing the Environment
PerformthefollowingproceduresbeforeyousetuptheADM.
Preparing an ESX Configuration
CreateandconfigureanewvSwitchforeachphysicalspanport.Repeatthefollowingproceduresforeachnew
vSwitch.
Creating a New vSwitch for Passive Discovery
To create a new vSwitch for Passive Discovery
1 ConnectthemonitorportstoavailablenetworkinterfacesontheESXserver.
2 ConnecttotheESXserverorvCenterbyusingvSphereclient.
3 NavigatetotheConfigurationtabontheESXserverwhereyouwanttodeployADMappliances.
4 Navigatetothenetworkingconfigurationoption.
5ClickAddNetworkingtoopentheAddnetworkwizard.
6 SelectconnectiontypeasVirtualMachine,andclickNext.
7 SelectthevmnicthatisconnectedtothemonitorportonthephysicalswitchandclickNext.
8Specifyanetworklabel,forexample,spanport,forthenewportgroupandclickNext.
9ClickFinish.
Configuring the vSwitch General Settings for Passive Discovery
To configure the vSwitch general settings for Passive Discovery
1OpenthenewvSwitchPropertieswindow.
2 SelectthevSwitchandclickEdit.
3 NavigatetotheSecuritytabandchangethePromiscuousModefromRejecttoAcceptandclickOK.
4Clickthenetworkadapterstab,selecttherelevantvmnicandclickEdit.
5 ChangetheConfiguredSpeed,Duplexto10MB,FullDuplex.
6ClickOKandthenClose.
Configuring the vSwitch for Passive Collector
Connect the Passive Collector to a port group. To define a port group
1 CreateaportgroupinthevSwitchasfollows:
aLogintotheESXServerorvCenterusingvCenterClient.TheVirtualInfrastructureClientscreen
appears.
bClicktheConfigurationtab.
c SelectNetworkingfromtheHardwarelist.
dFromtheprecedingscreen,selectProperties.
e SelectPortsandclickAdd.
f SelectVirtualMachineandclickNext.
IMPORTANTPerformthefollowingstepstoconnecttovSwitchesthatspantheinternaltraffic
betweenvirtualmachinesrunningontheESXServer.

Application Discovery Manager Administration Guide
18 VMware, Inc.
gSettheNetworkLabel,forexample,ADMspanportandclickNext.
hVerifythattheportgroupislisted,andclickFinish.
2 ChangethePromiscuousModetoAccept.ThisvalueissettoRejectbydefault.
a Selecttheportgroupthatyoucreated;forexample,ADMspanport.
bClickEditandselectSecuritytab.
c SelectPromiscuousMode,andthenselectAcceptfromthelistbox.
dClickOKandthenClose.
Configuring dvSwitch for Passive Collector
IfavirtualmachineisdirectlyconnectedtothenetworkandnotthroughthevSwitch,thephysicalCollector
observesthetraffic,whilethevSwitchdoesnot.ThisistermedasVMDirectPath.
Software‐basedCiscoNexusswitchesaresupported.
ThisprocedureisrelevantonlyforvSphere4andnotforESX3.5.
To create a port group in the dvSwitch
1LogintothevCenterserverwithvCenterclient.
2ClickConfigurationandthenselectNetworkingfromtheInventorytab.
3 SelectDistributedvSwitch.
4OntheConfigurationtab,selectNewPortGroup.
5ConfiguresupportforallVLANsbyenteringthedetailsontheCreateDistributedVirtualPortGroup
windowasshowninTable 2‐2.
.
6ClickNexttofinishandreturntothedvSwitchNetworkConfigurationscreen.
7 SelecttheADMspanportgroupandclickProperties.
8ClicktheSecuritytabontheADMspanportPropertieswindow.
9 SelectPromiscuousMode,andthenselectAcceptfromthelistbox.
10 ClickOKandthenClose.
Deploying the Virtual Appliances
TheADMvirtualappliancecontainsandrunsoneormoreofthefollowingcomponents:
Aggregator
Database
ActiveDiscoveryUNIX
PassiveDiscovery
“SystemArchitecture”onpage 9describestheappliancearchitecture.
PerformthefollowingproceduresbyusingaWindowsmachinewithremoteaccesstotheESXserver.
Table 2-2. VLAN Support
Parameter Value Specified
Name Anameforportgroup(ADMspanport).ThenamemustbesameasinvSwitchprocedure.
Numberofports OneforeachESXindatacenter
VLANtype VLANTrunking
VLANID 0‐4094

VMware, Inc. 19
Chapter 2 Installing ADM
Deploying the ADM Virtual Appliances
VirtualappliancesareinstalledontheESXserveraccordingtheconfigurationsinTable 2‐3.
Before You Begin
Ensureallrequirementsaremetasdescribedin“ESXResources”onpage 15.
Deployment Procedure
RepeatthefollowingstepsoneachADMvirtualappliance,excepttheWindowsCollectorthatisinstalled
separatelyasdescribedin“InstallingWindowsCollector”onpage 20:
1 DownloadtheADMvirtualappliancefilesfromVMwareWebsiteandextractthefilestoalocalfolder.
TheextractedZipfilesincludeanOVFandaVMDKfile.
TheVAfilesareinZipformatwiththefollowingnamingconvention:
OVFTemplate‐buildnumber
where:
OVFTemplateisasdescribedinTable 2‐3.
buildnumberistheADMversionandbuildnumber.
2LogintotheESXserverbyusingthevSphereclient.
3IntheFilemenu,selectDeployOVFTemplate.BrowsetotheOVFfileandselectit.
Table 2-3. Virtual Appliance Configuration
Appliance Type OVF Template Includes Component(s)
Aggregator ADMCore Aggregator
Database
Single‐Box ADMCore Aggregator
Database
PassiveDiscovery
UNIXActiveDiscovery
Database ADMCore Database
Aggregatorwithremote
database
ADMCore Aggregator
PassiveDiscoveryCollector ADMCollector PassiveDiscovery
PassiveandActive
DiscoveryCollector
ADMCollector UNIXActiveandPassiveDiscovery
NOTEInstallaseparateWindowsCollectorusinganinstallationwizardasdescribedin
“InstallingWindowsCollector”onpage 20.
IMPORTANTPerformanceofADMCollectorsisaffectedbydistanceandnetworklatencybetweenthe
Collectorsandobjectsbeingdiscovered.Formoreinformation,seeVMwarevCenterApplicationDiscovery
ManagerPeformanceandScalabilityGuide.
NOTEYoucandeployADMcomponentsinanyorderorevensimultaneouslybyusingthevSphereclient.
IMPORTANTEnsurethatthebuildnumberisidenticalforallappliancesdeployed.
NOTEIfanSSLCertificateWarningmessageappears,clickIgnore.

Application Discovery Manager Administration Guide
20 VMware, Inc.
4ClickNext.TheOVFTemplateDetailsscreenappears.
5ClickNext.TheNameandLocationscreenappears.
6TypeauniquevirtualappliancenameaccordingtotheITnamingconventionofyourorganizationand
withrelevancetotheappliancetypeasdescribedinTable 2‐3.
7ClickNext.TheDatastorescreenappears.
8ClickNext.TheNetworkMappingscreenappears.
9ClickNext.TheReadytoCompletescreenappears.ItdisplaysdetailsabouttheOVFfile,sizefor
downloadandsizewhenextracted,virtualappliancename,hostorcluster,datastoreandnetwork
mapping.
10 ClickFinishtoconfirmthesettingsandbeginthedeployment.
11 ClickCloseinthemessagedialogboxwhendeploymentsuccessfullycompletes.
12 Repeatthisprocedureuntilallcomponentsaredeployed,andthencontinuewith“InstallingWindows
Collector”onpage 20.
Installing Windows Collector
Before You Begin
EnsurethattheWindowsmachineonwhichtheCollectorisbeinginstalledmeetstheminimumrequirements
asdescribedin“ESXResources”onpage 15.
Deployment
To deploy Windows Collector on a Windows machine
1 DownloadtheVMwarevCenterADMWindowsCollectorexecutablefilefromVMwareWebsitetoyour
localWindowsmachine.
2Double‐clicktheexecutablefile.
TheInstallShieldWizardscreenappears.
3ClickNext.TheLicenseAgreementscreenappears.
4Readthelicense,selectIacceptthetermsofthelicenseagreement,andclickNext.TheChoose
InstallationFolderscreenappears.
5Ifyouwanttochangethedefaultinstallationlocation,clickChangeandselectthepreferredinstallation
directory.
6ClickNext.TheHostInformationscreenappears.
NOTEIfthereismorethanonedatastore,selectthedatastorewhereyouwanttoinstallthevirtual
machine.
NOTETheprocessofcopyingandconfiguringtheADMcomponentcantakeseveralminutes.The
deploymentandconfigurationstatusappearsinamessagedialogboxandtheRecentTaskspane.
NOTEIfawarningappearsaboutanunknownpublisher,clickRuntoproceed.
NOTEUsethescrollbartoviewallofthelicensetext.Ifyoudonotwanttoacceptthelicense,youwill
bepromptedtoconfirmthisbeforetheinstallationprogramcloses.
NOTEThedefaultinstallationpathis:C:\Program Files\VMware\ADM.