Part #: 695096 Rev. 7
Vocollect terminals are designed to be compliant with the rules and regulations in the
locations into which they are sold and are labeled as required. Vocollect terminals are
type approved and do not require the user to obtain license or authorization before
using them. Changes or modifications not expressly approved by Vocollect, Inc. could
void the user's authority to operate the equipment.
This product may contain one of these radio devices. Please refer to the device label.
Card Manufacturer and P/N Vocollect Talkman
FCC ID #
Vocollect Talkman
Canadian ID #
Symbol-LA-3021-101-US
2Mbps 100mW
H9PLA3021-100
MQOTT600-22300 2570A-TT600T2
Symbol-LA-4121-1020-US
H9PLA4121
MQOTT600-35300 2570A-TT600
Lucent-PC24E-H-FC
Worldcard
MQOTT500-33300 230-391152A
CISCO-AIR-PCM350
LDK102040
MQOTT600-40300 2570A-TT600
Vocollect Wi-Fi
600-2400-032
MQOTT600-50300 2570A-TT600-50300
The Talkman product is approved for:
1. FCC Part 15 Subpart C
2. Industry Canada RSS211 and RSS139
3. ETSI 300-328, ETSI 300-826, EN 60950
For More Information
The Talkman online documentation provides detailed information about the Talkman
terminal, how to use it, and how to troubleshoot problems that you may encounter. You
can also contact Vocollect at:
Vocollect
703 Rodi Road
Pittsburgh, PA 15235
Toll-free: 866.Vocollect (866.862.6553)
Main World Wide Web page: www.vocollect.com
Copyright 2001 Vocollect, Inc. All Rights Reserved
Talkman T2 Terminal
Product Notes & Warnings
•TalkmanT2 terminals are assembled under strict Vocollect manufacturing
guidelines. Tampering with a terminal in any manner will void published operating
specifications and may void the product warranty.
•Never remove the battery from a Talkman terminal unless the terminal has been
properly powered off.
•Vocollect highly recommends that the Talkman terminal be worn on the right side
of the body with the terminal’s buttons on the top and its connectors toward the
operator’s back.
•When a terminal is not in use, it should be placed properly into a terminal charger.
•It is recommended that a hog hair cleaning brush (or similar brush) be used to
clean the contacts on the terminal. This brush is a small, inexpensive, three-row
toothbrush style, general cleaning brush. It is made of natural, stiff hog hair
bristles and has a 7 3/4" plywood handle. Gently brush the terminal’s contacts to
clean away dirt and other obstructions that might prohibit them from making a
solid connection.
Product Specifications
Weight 15.9 ounces (with standard battery)
Length 6.5” (16.5 cm)
Width 3.38” (8.5 cm)
Depth 1.5” (4 cm)
I/O Ports •Headset port (yellow)
•Maintenance port with audio out and
RS-232 serial support (red)
•Bar code port with RS-232 decoded
bar code support (blue)
Operating Temperature -29°to 50°C (-20°to 122°F)
Storage Temperature -34°to 60°C (-30°to 140°F)
Drop Test The Talkman terminal meets the MIL STD
810F specification for shock and vibration.
In addition the terminal has been tested to
the following specifications:
•25 drops from 5 feet and 10 additional
drops from 6 feet onto polished
concrete
•10 drops from 5 feet at –20°F onto
polished concrete
Humidity Functional from 5% to 95% non-
condensing
