VOCUS AudioCodes MP264DB User manual

Commander Pty Ltd
ABN 85 136 950 082
Level 10, 452 Flinders St
Melbourne VIC 3000
Setting up your WiFi Network
Your gateway has WiFi capabilities, which means you can connect wireless devices such as
laptops, smartphones and tablets to the gateway in your oce so that you can access the
internet through them wirelessly.
On the back of the gateway you will find your WiFi network name (WiFi SSID) and password
(WiFi Password), you will need these details to connect your devices.
Using the device you would like to connect to your gateway, search for WiFi networks. Once
you find your WiFi network name (or SSID) select that network. You will be prompted to enter
a password or network key. Once you have entered your password you should be connected!
Your connection and WiFi network settings are unique and automatically secure, you can
repeat the above steps on multiple devices that you would like to connect wirelessly.
COMMANDERGATEWAY
QUICK START GUIDE
QUICKSTART GUIDE & USER MANUAL
> Please read carefully before use.

MP26444C630
VT4532920
M2
P03
VT4532920
MP26444C630
VT4532920
M2
P03
VT4532920
MP26444C630
VT4532920
M2
P03
VT4532920
Connecting your gateway for VDSL
1. Connect the supplied network cable to your computer then to your gateway port labelled
LAN 1
.
2.
Connect the supplied VDSL splitter filter to your telephone wall socket as illustrated above .
3. Connect the supplied telephone cable to the VDSL port on the gateway , and connect
the other end to the port labelled VDSL/gateway on the splitter as pictured above
.
4. To connect your telephone handset, connect the telephone cable from your handset to
the port labelled Phone on the filter .
5. Connect your power adaptor to the gateway and your wall outlet. Ensure the gateway is
switched on.
6. If you have a Smart Voice Service, connect the telephone cable from your existing
telephone or telephone system to the port labeled Phone 1 and/or Phone 2 (refer to your
Welcome Email)
.
Configuring Your Gateway
After you have completed steps 1 through 6, your gateway will automatically start talking to our
servers. It will retrieve your login details and other settings during this time, so please leave it
connected and allow up to 10 minutes for your gateway to set up automatically. Your gateway
may reboot during this process.
Once this process has completed, you should have a green light for Status and Broadband.
Connecting your gateway to your NBN™ Service
This quick start guide is designed to get you up and running quickly with your new gateway.
Power Adaptor
Phone Cable
2x Network Cable
Connecting your gateway to your FTTN/B Service
This quick start guide is designed to get you up and running quickly with your new gateway.
Power Adaptor
Phone Cable
Network Cable
Connecting your gateway for NBN
1. Connect your gateway to the internet by connecting the LAN4/WAN to the NBN Data
Port or the allocated labelled UNI-D on the NBN ONT using the supplied network cable
.
2. Connect the second network cable to your computer then to your gateway port labelled
LAN1
.
3. Connect your power adaptor to the gateway and your wall outlet. Ensure the gateway is
switched on.
4. If you have a Smart Voice Service, connect the telephone cable from your existing
telephone or telephone system to the port labeled Phone 1 and/or Phone 2 from your
Welcome Email .
Configuring Your Gateway
After you have completed steps 1 through 4, your gateway will automatically start talking to
our servers. It will retrieve your login details and other settings during this time, so please
leave it connected and allow up to 10 minutes for your gateway to set up automatically.
Your gateway may reboot during this process.
Once this process has completed, you should have a green light for Status and Broadband.
NBN™ Connection Box

Setting up your WiFi Network
Your gateway has WiFi capabilities, which means you can connect wireless devices such as
laptops, smartphones and tablets to the gateway in your oce so that you can access the
internet through them wirelessly.
On the back of the gateway you will find your WiFi network name (WiFi SSID) and password
(WiFi Password), you will need these details to connect your devices.
Using the device you would like to connect to your gateway, search for WiFi networks. Once
you find your WiFi network name (or SSID) select that network. You will be prompted to enter
a password or network key. Once you have entered your password you should be connected!
Your connection and WiFi network settings are unique and automatically secure, you can
repeat the above steps on multiple devices that you would like to connect wirelessly.
COMMANDERGATEWAY
QUICK START GUIDE
QUICKSTART GUIDE & USER MANUAL
> Please read carefully before use.