Vogue U376 User manual

Assembly Instructions
U376
Gastronorm Trolley
Assembly
1. Attach the six cross members to one of the side frames, using six of the screws supplied.
2. Lay this side frame on the floor with the cross members pointing upwards.
3. Carefully position the second side frame on top of the cross members. Attach using the remaining
screws.
4. With the assembled frames still on their side, screw the covers and castors intoframes.
Note: Be sure to check all packaging materials for any small parts that may have come
loose during transportation.
Note: The braked castors should be at the front of the trolley. If the castors are not
Parts
Safety Tips
• DO NOT stand or climb on the trolley.
• DO NOT drop heavy items on the trolley.
• DO NOT place heavier items on the top of the trolley than
on the bottom.
• Whilst all care has been taken to remove sharp edges, care
must be taken when cleaning or handling the
trolley to
prevent risk of injury from exposed metal edges.
Cleaning
•Cleanthe trolley using warm soapy water.
• Dry thoroughly after cleaning.
Part Quantity
Side frame x2
Cross members x6
Castors x2
Castors with brakes x2
Castor covers x4
Screws0%; [12
Allen Key
x1
x1
Nuts x4
2peQ:UHQFK
evenly touching on the floor, adjust the castors until it evenly assembled and
VOGUE, Fourth Way, Avonmouth Bristol, BS11 8TB, United Kingdom
firmly fix with the hex nut.