VoiSmart NT-3010-02-24/2POE User manual

NT-3010-02-24/2POE
24-PORT 10/100M POE
+ 2 COMBO GIGABIT UTP
/SFP OPEN SLOT SWITCH
Quick Installation Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class B digital device,
pursuant to Part 2 and 15 of FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates and radiates radio
frequency energy and, if not installed and
used in accordance with the user’s manual, it
may cause interference in which case users
will be required to correct interference at their
own expenses.
CE Warning
This is a Class B product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 24 10/100M PoE + 2
Combo Gigabit UTP/SFP to uplink/downlink
ports. It is designed for easy installation and
high performance in an environment where
traffic is on the network and the number of
users increases continuously.
It consists of 24 PSE/PoE ports. This can
solve the limitation of the power outlet
location and offer the system designer a
flexible solution to locate the network device
everywhere.
The rack-mount size was specifically
designed for medium to large workgroups.
The Switch can be installed where space is
limited; moreover it provides smooth network
migration and easy to upgrade the network
capacity. The 19” size can be rack-mount on
19” cabinet.
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
 One PoE Web Smart Switch
 One AC Power Cord
 19” Rack-mount Kit
Note: If any of these items is missing or
damaged, please contact your local supplier for
replacement.
Key Features
 Provides 24 10/100Mbps PoE ports and 2
Combo Gigabit UTP/SFP Open Slot
 24 PSE/PoE ports
 Supporting the power Max. 15.4 W for each
PSE/PoE port (Total Power: 195W)
 19” rack-mount size
 Non-blocking & Non-head-of-line blocking
full wire speed forwarding
 Store-and-forward operation support
 Supports broadcast storm filtering
 All ports provide Auto-Negotiation and Auto
-MDI/ MDI-X functions
 IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
 Smart plug & play
Front Panel (LEDs)
LED Indicators of 24 PoE Port + 2 Combo
Gigabit UTP/SFP Switch
LED Status Description No. Of
LED
Power On Power on Power
On Link 1000Mbps
1000M off Link 10/100Mbps 2 (25~26)
On Link 26 (1~26)
Link/ ACT
Flashing Data activating 26 (1~26)
On
Port is linked to
Power Device 24 (1~24)
PoE
Off
No Power Device
is connected 24 (1~24)
Connections
Switch/Hub to this 24 Port PoE + 2
Combo UTP/SFP Open Slot Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another
switch without crossover cable.

Connections
PC/Other devices to this 24 Port PoE + 2
Combo Gigabit UTP/SFP Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Power Device to this 24 Port PoE + 2
Combo Gigabit UTP/SFP Switch and
getting 48V power source through Cat.
5 cables
Using a Cat. 5 twisted-pair cable to connect
Power Device to any port (1~24) of this switch.
This switch will supply 48V power to Power
Device via a Cat. 5 twisted-pair cable. Please
be noted Power Device should also comply with
IEEE 802.3af.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz)
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3x
IEEE 802.3ad Trunk
IEEE 802.3af PoE
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service
IEEE 802.1d STP
IEEE 802.1w RSTP
Features
10/100BaseTX with PSE/PoE
RJ-45 Port : 24
10/100/1000BaseT : 2
Gigabit SFP Open Slots: 2
MAC Address: 4K
Buffer Memory: 2.75 Mb
Method: Store and Forward
Filtering/
Forwarding
Rates
1000Mbps port – 1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
UTP port:
10/100/1000BaseT Cat. 5, 5E,
6 UTP/STP, up to 100 m
SFP Modules 1000BaseSX:
50/125μm Multi Mode Fiber
optic cable, up to 220 m
62.5/125μm Multi Mode Fiber
optic cable, up to 550 m
SFP Modules 1000BaseLX:
9/125μm Single Mode Fiber
optic cable
LED
Indicators
Per Port: LINK/ACT, PoE
ACT/Status
Per Unit: Power
Power
Requirement 100~240V/AC, 50~60Hz
Power
Consumption 195 Watts (Max)
Dimensions 440 × 220 × 44 mm (L x W x H)
Weight 4.7kg
Operating
Temperature 0 to 45℃
Storage
Temperature -20 to 90℃
Humidity 10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE