VOLTCRAFT HS-100 User manual

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en

Operating Elements
1
2
3
4
5
6
1 Carabiner
2 LCD display
3 Button controls: on/off-tare, unit, hold
4 Hook
5 Battery compartment cover
6 Battery compartment
Insert Batteries
• Remove the battery compartment cover (5).
• Insert 2 x AA batteries into the battery
compartment (6) matching polarities as shown
inside the compartment.
• Replace the battery compartment cover (5).
Replace batteries when the low battery
indicator shows.
Operation
Overload Warning! When the LCD
shows “O-Ld” remove any attached load
to avoid damage to the load cell, scale,
and to prevent injury.
a) Weighing
• Hang the scale with hook (4) attached.
• Press the on/off (3) button to turn the power on.
• When the display (2) shows “0.0”, hang the load
to be weighed over the hook (4) and wait for the
reading to stabilize.
• Press and hold the on/off button to turn the
power off.
To preserve battery life, the scale
will automatically power off after
120 seconds.
b) Hold
Press the hold button to pause the weight reading
for 10 seconds.
The symbol will appear on the
display (2) in to indicate the hold function
is being used.
c) Tare/Zero
This function can be used for weighing substances
that require being put into a container such as
powder or liquids.
• Put the empty container over the hook, wait a few
moments for the reading to stabilize, then press
the tare button.
• The display (2) will return to “0.0”.
• Place/pour any objects/liquid to be weighed into
the container.
d) Change Unit of Measurement
Press the unit button to switch between kg and lb
units of measurement.
Care and Cleaning
• Disconnect any loads from product before each
cleaning.
• Do not use any aggressive cleaning agents,
rubbing alcohol or other chemical solutions as
they can cause damage to the housing and
malfunctioning.
• Clean the product with a dry, bre-free cloth.
Disposal
a) Product
Electronic devices are recyclable
waste and must not be disposed of in
the household waste. At the end of its
service life, dispose of the product in
accordance with applicable regulatory
guidelines.
Remove any inserted (rechargeable) batteries and
dispose of them separately from the product.
b) (Rechargeable) Batteries
You as the end user are required by law
(Battery Ordinance) to return all used
(rechargeable) batteries. Disposing
of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labeled
with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for
the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to
collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulll your statutory obligations and
contribute to the protection of the environment.
Technical Data
a) General
Input voltage..................... 2 x 1.5 V AA batteries
Current consumption ........ On: 15 mA
Off: 10 µA
Accuracy........................... ±0.5 %
Data lock function............. yes
Tare function..................... yes
Material............................. Hooks: Stainless steel
Housing: Stainless steel
and ABS
Units ................................. kg, lb
Automatic power off.......... 120 s
LCD .................................. Size: 51 x 21 mm
LCD Backlight................... yes
Operating conditions......... 0 to +30 °C (<75% RH)
+30 to +40 °C
(<50% RH)
(non-condensing)
Storage conditions............ -10 to +30 °C (<75% RH)
+30 to +50 °C
(<50% RH)
(non-condensing)
Operating altitude ............. 0 - 2000 m
Dimensions (W x H x D) ... 82 x 152 x 37 mm
(without hooks)
Weight .............................. 542 g (without battery,
incl. 2x hooks)
b) Item No. 2176564
Capacity............................ max. 300 kg (min. 500 g)
Resolution......................... 200g
c) Item No. 2178480
Capacity............................ max. 100 kg (min. 500 g)
Resolution......................... 100 g
Operating Instructions
Hanging Scale
Item No. 2176564 (HS-300),
Item No. 2178480 (HS-100)
Intended Use
The product is a digital hanging scale with large back lit LCD display. It is designed to weigh vertically raised
loads. It is powered by two AA type 1.5 V batteries and has tare, hold, and unit selection functions.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
result in other hazards. Read the instructions carefully and store them in a safe place. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Hanging scale
• 2x 1.5 V AA battery
• Carabiner
• Hook
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important information in these
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions
carefully and especially observe
the safety information. If you do not
follow the safety instructions and
information on proper handling in
this manual, we assume no liability
for any resulting personal injury or
damage to property. Such cases will
invalidate the warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach
of children and pets.
• Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
• Protect the appliance from extreme
temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, steam and
solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
• Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
• Consult an expert when in doubt about the
operation, safety or connection of the appliance.
• There are no user-serviceable parts inside the
device. Maintenance, modications and repairs
must only be completed by a technician or an
authorised repair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Connected Devices
• Also observe the safety and operating
instructions of any other devices which are
connected to the product e.g. lifting arm.
c) Persons and Equipment
• Do not exceed the maximum capacity of the
scale. Refer to the “Technical Data” section
for further information.
• The scale must be secured to a connection that
can withstand loads greater than the maximum
capacity of the scale.
• While under load, prevent jolts, twisting,
swinging, vibrations, and horizontal forces.
• Only raise loads onto the scale in a vertical
direction.
• Before loading the scale, visually inspect
hanging/load receiving elements/devices for
damage and wear. Do not use if any damage or
wear is found!
• Do not leave loads hanging from the scale for
extended periods of time. This can damage the
measuring equipment and/or any connected
devices.
• Avoid shock loading the scale. Sudden and jerky
acceleration or deceleration of attached loads
can cause breakage.
• Make sure there are no persons or objects
underneath elevated loads. This can result in
serious bodily harm if the load drops.
• The scale is not designed to weigh extremely
hot substances (e.g. molten iron, boiling water)
or burning substances. Serious harm can be
caused in the event of an accident.
d) (Rechargeable) Batteries
• Correct polarity must be observed while inserting
the (rechargeable) battery.
• The (rechargeable) batteries should be removed
from the device if it is not used for a long period
of time to avoid damage through leaking.
Leaking or damaged (rechargeable) batteries
might cause acid burns when in contact with
skin, therefore use suitable protective gloves to
handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of
reach of children. Do not leave (rechargeable)
batteries lying around, as there is risk, that
children or pets swallow them.
• All (rechargeable) batteries should be
replaced at the same time. Mixing old and new
(rechargeable) batteries in the device can lead
to (rechargeable) battery leakage and device
damage.
• (Rechargeable) batteries must not be
dismantled, short-circuited or thrown into re.
Never recharge nonrechargeable batteries.
There is a risk of explosion!
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2176564_2178480_v2_1219_02_dh_m_en