Vonets VAP11G-500 User instructions

VONETS——VAP11G-500 300M Mini WiFi Repeater
1
,
300M Mini WiFi Repeater
High-power CPE
VAP11G-500
Quick Setting Guide

VONETS——VAP11G-500 300M Mini WiFi Repeater
2
Declaration
Copyright © 2015 Shenzhen HouTian Network Communication Technology
Co.,Ltd
All rights reserved, with retained ownership
Without Shenzhen HouTian Network Communication Technology Co.,Ltd written
authorization, any company or personal can’t copy, writer or translation part or all
contents. Can’t do commodity distribution for any commercial or profitable purposes
by any ways(electricity, mechanical, photo print, record or other methods).
VONETS is the registered trademark of Shenzhen HouTian Network Communication
Technology Co.Ltd. The other all trademarks or registered trademarks mentioned in
this documents are belong to the individual owners. The product specifications and
information technology mentioned in this manual are just for reference, if any updates,
without other notice. Except for special agreements, this manual is just for user
guidance, any statements, information and so on in this manual can’t constitute the
warranty of any forms.

VONETS——VAP11G-500 300M Mini WiFi Repeater
3
Product Introduction:
VAP11G-500 supports two kinds of functions
1.WiFi Repeater （VAP11G-500) : is a functional device that assists the Internet
communication gateway to expand wireless coverage area. It is mainly used for
expansion of wireless network signal and area coverage to make sure the smooth
running of wireless network.
2.Intelligent WiFi Bridge mode(VAP11G-500): WiFi intelligent bridge function, wireless
to wired, wired to wireless intelligent switching.
VAP11G-500 supports two kinds of power mode
1. Ordinary power mode : The factory default setting of VAP11G-500 is ordinary power mode. In this
mode, the transmission distance (without obstacle) : 100m.
2. High-power mode：
In this mode, the transmission distance (without obstacle) : 500m. It is the best partner of
remote monitoring, long range WiFi signal coverage.

VONETS——VAP11G-500 300M Mini WiFi Repeater
4
Remark:
1.When you want to restore the factory default setting, please press RESET button on
the product for 5 seconds, after blue light blink a few, it will reset automatically (it will
take about 30 seconds).
2.The operating mode is“bridge+ WiFi signal repeater”. WhenVAP11G-500 connects
other devices by wired, it will in bridge mode automatically, if not, will in repeater
mode, you don’t need to switch it manually.
3. If you want to use the high-power mode, please purchase two or more
VAP11G-500 with pairing. For the transmission distance of traditional WiFi device can’t
reach 500m, it can’t communicate with VAP11G-500.

VONETS——VAP11G-500 300M Mini WiFi Repeater
5
Chapter 1 Quick Setting Guide of WiFi
Repeater mode
1. Configure VAP11G-500
Wireless connect VAP11G-500 by laptops, smart mobiles, IPAD and other wireless
devices.
The default WiFi SSID (WiFi name) is: VONETS_the last six characters of product
MAC address.
The default WiFi password is 12345678
See the following picture:
If you configure it by computer, please set computer IP address to obtain an IP address
automatically, please see the words in the red circle of the following picture:

VONETS——VAP11G-500 300M Mini WiFi Repeater
6
Tips:
(1) If you connect VAP11G-500 by wireless, please disable the local connection of
computer.
(2) If you connect VAP11G-500 by wired, please disable the WiFi network of the
Computer.
2. Open the IE browser, enter http://vonets.cfg virtual domain name setting(VDNS).
Remark:
Enter domain name, then Enter, the login page will appear, the default admin and
password is admin.
3. Power selection
Enter the configuration interface, you can choose ordinary power mode or high-power
mode. Choosing high-power, the transmission distance (without obstacle) : 500m. The
factory default setting of VAP11G-500 is Ordinary power mode. Please see as below:

VONETS——VAP11G-500 300M Mini WiFi Repeater
7
Remark: After switched the WiFi Tx power of the device, please turn off and reboot
the device.
4. Scan Hotspots
After entering the IE browser, the WiFi hotspots window will appear, can search the
WIFI hotspots signal that opened SSID broadcast around, please see the following:
Choose a correct WiFi signal, then click Next, the following interface will appear:

VONETS——VAP11G-500 300M Mini WiFi Repeater
8
Enter the correct password, confirm it is correct one, then click Apply button.
Click Apply button, the above interface will appear, the configured parameters
have been saved successfully, please make sure the password input is correct, turn
off and reboot the device.
Remark:
Remark: After configured successfully, the WiFi name of the device is the name of
source hot spot_the last two character of MAC address, the password, encryption methd
and channel are the same as the source hot spot, the users can go to WiFi Repeater
option to change SSID(WiFi name) and password.

VONETS——VAP11G-500 300M Mini WiFi Repeater
9
product picture，as below:
Tips:
1) Without connecting any hot spot,the blue status light of VAP11G-500
will rapid flashing regularly.
2) When connected hot spot with success and the wireless hot spot signal
more than 50%,the blue status light of VAP11G-500 will rapid flashing
continually.
3)When connected hot spot with success and the wireless hot spot signal
more than 10% and less than 50%, the blue status light of VAP11G-500
will slowly flashing continually.
4)When connected hot spot with success and the wireless hot spot signal
more than 10%, the blue status light of VAP11G-500 will off.
5)When failed connect hot spot, the blue status light of VAP11G-500 will
off.
Shenzhen HouTian Network Communication Technology Co.,Ltd
http://www.vonets.com