How To Use
1. How to use the POWER ON key
Press the POWER ON key ( ) to start the massager. The green
indicator light will turn on. If you press the POWER ON key again, it
will change the massaging mode. Each time the massager is turned
on, it will start on the default mode. Once the massager is powered
on, continue to press POWER ON to change through the modes. Hold
down the POWER ON key for 3 seconds to shut down the device.
2. How to use the music key
The music key is used to turn nature sounds on and off. It also allows
for the navigation of six different sounds built into the massager. The
music will automatically turn on when the massager is powered on.
Press the ( ) to shift through different sounds. Hold down the ( )
to turn off the sounds and press the music key again to turn them
back on.
3. How to use the vibration amplitude key
There are four levels of vibration available, ranging from mild to
intense. When first turned on, the massager will always default to the
mildest setting. Hold down the vibration amplitude key ( ) for 3
seconds to turn off vibration. Press the vibration amplitude key again
to turn vibration back on.
4. How to use the temperature control key
When the massager is initially turned on, the heating option will
automatically turn on. Hold down the ( ) for 3 seconds to turn off
the heat. The green indicator light will flash two times. To turn the
heat back on, press the ( ) again, the green indicator light will flash
once.
5. How to use the volume key
The volume key controls the volume of the nature sounds. There are
four levels of sound available. The massager will default to the lowest
sound. Press the ( ) to increase the sound. The volume key will
recycle from low to high.
