. Overview
UT-6405 is a5-port 100M non-managedethernet switch with reverse
polarityprotectionof DC input for avoiding beingdamaged. It has in geniou s
appearance design and supports industrial standard DIN-Rail and wall-
mounted installation, so it's very easy to be installedand used in any industrial
networks.
.Main Features
. Indication Light
a. PWR: DC power supply
connected as shownin figure 1and the powerindication light
PWR will light,the switch operatesnormally.
B. RJ-45:After network cableis connected theleft green light
will light for 100Base network and not light for10Base network
The right yellowindication light isnetwork link indicationlight and
it will light when the network cable is connectedand switchoperates
normally. Bothyellow and greenlights will not light if the network
cable is notconnected.
12/24/48VDC(10.8~52.8VDC)
123
. Power supply connection
UT-6405Ethernet switch supportsDC
power supply inputs,and the modelequips
with reverse polarityprotection for avoidingbeing damaged.
1. Connect thepositive/negative polarity toV+ andV- terminals
respectively
2. Tightenthe screws toavoid loose connectionand bad contact.
12/24/48VDC(10.8~52.8VDC)
Figure 1 Powersupply input terminal
23
1
V+ V
. Dimension
. Installation
1. DIN-Rail
Push the topof the devicerail to fixedrail.
Then push itinto the railslightly again
2. Wall-mounted
Tighten themetal fixation stripwith accompanied screwsas
shown in theabove figure.
Then hang themachine with lockedmetal strip ontowall or
machine cabinet.
UT-6405
5-Port 100M Unmanaged Ethernet Switch
User Manual
Standard:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
Interface:
RJ45 port:5 10/100Base-T(X) ports, auto detection,
full/half-duplex, auto MDI/MDI-X
LED indication:
PWR indicator and RJ-45 indicators for port 1-5
Power Supply:
Input Voltage 12/24/48VDC(10.8~52.8VDC)
Power consumption: 120mA@24Vmax
One pluggable 3-pin terminal block
Overload protection: Yes
Polarity protection: Yes
Mechanical Property:
Enclosure:IP40
Method of installation:
Dimension (W H D):150 mm 37mm 100mm
Working Environment:
Working temperature: -20 ~ 75
Storage temperature: -40 ~ 85
Relative humidity: 0% ~ 95% (no condensation)
Industry Standard:
EMI FCC Part 15 Subpart B classA EN55022 class A
EMS
IEC(EN)61000-4-2(ESD)
IEC(EN)61000-4-3(RS)
IEC(EN)61000-4-4(EFT)
IEC(EN)61000-4-5(Surge)
IEC(EN)61000-4-6(CS)
IEC(EN)61000-4-8
IEC 60068-2-27(Shock)
IEC 60068-2-32(Freefall)
IEC 60068-2-6(Vibration)
DIN-Rail/wall-mounted
150mm
5.90in
100mm
3.93in
37mm
1.45in
37mm
1.45in
37mm
1.45in
150mm
5.90in
37mm
1.45in
150mm
5.90in
