VOTOMY VT360 User manual

Power on/o
Bluetooth
Pause/play
Decrease Volume/Previous Song
Ncrease Volume/Next Song
Power Input:5V/2A
Power Input:5V/1A
Aux In

Bluetooth Connection
5.0
Make sure that the speaker is within 10 meters
from your mobile device.
1.When your speaker is turned o, press and hold
the buon until you hear a rising tone and the
LEDindicators turn blinking blue.
2.Go to the Bluetooth seings on your mobile
device, search and select "VT360" from the list
of device(s).
3.Once paired, the LED indicators turn solid blue.
hps://drive.google.com/le/d/1Hm-EdK1yPs2YE4y_6tkK6NtdQUcojPAL/view?usp=sharing

Bluetooth Disconnection
Press and buons simultaneously until LED
Indicator fast blinking blue to disconnect the currently
connected device, and resta a new Bluetooth-pairing
status.
hps://drive.google.com/le/d/1B5ozhSYVCil_qLf0BNbYgwBL687cZS/view?usp=sharing

Wireless Stereo Pairing
1. Long press the buon to enter into the true wireless
stereo pairing mode as a master speaker. If one of them fails,
clean up the pairing information.
2. Enable bluetooth on your device and connect to "VT360",
stereo sound will play from both speakers.
3. Once paired, the MAIN speaker LED indicator ashes blue slowly.
hps://drive.google.com/le/d/10rXE1eyBcfsyQoRApSeFjr_iLUDsVD2n/view?usp=sharing

Long press the buon on the speaker until LED indicator
fast blinking blue to disconnect the TWS connection.
Disconnect The TWS Connection
Long press the "Bluetooth" buon of any speaker for 3 seconds, TWS disconnects

1. Power on the speaker.
2. Using the AUX Cable, connect your external
device to the AUX in po on the speaker.
3. The speaker will automatically turn into AUX IN
mode, the LED indicators turn solid green.
AUX IN Mode（Without AUX Cable）

PowerPank

How To Reset?
Long press the
for 10 seconds