VOX electronics EBC 400 MCB User manual

EBC 400 MCB
OPERATING INSTRUCTIONS BUILT-IN VITROCERAMIC HOB
UPUTSTVO ZA UPOTREBU STAKLO KERAMIČKA KUHINJSKA PLOČA
УПАTСТВА ЗА РАКУВАЊЕ ВИТРОКЕРАМИЧКА ПЛОЧА НА ШПОРЕТ
NAVODILA ZA UPORABO STEKLOKERAMIČNA KUHALNA PLOŠČA
UPUTSTVO ZA UPORABU STAKLOKERAMIČKA PLOČA ZA KUHANJE
MANUAL DO USUÁRIO 󶂢PLACA VITROCERÂMICA ENCASTRÁVEL
GBR
SRB
SVN
MKD
HRV
PRT

CONTENTS:
DESCRIPTION OF THE HOB
SAFETY INSTRUCTIONS
INSTALLATON
Locating Your Built-in Hob
Electrical Connection of Your Hob
USAGE
Residual Heat Functions
CLEANING AND CARE
2
GBR

3
DESCRIPTION OF THE HOB
Dear Customer,
It is important that you should read this manual for best performance and
to extend the life of your appliance. We recommend you to keep this manual
for future reference.
Your new hob is guaranteed and will give lasting service. This guarantee
is only applicable if the appliance has been installed and operated in
accordance with the operating and installation instructions detailed in this
manual.
Note: Appearance of your hob maybe different than the model shown above
due to its configuration.

4
SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE USING
YOUR APPLIANCE, AND KEEP IT IN A CONVENIENT PLACE FOR REFERENCE
WHEN NECESSARY.
THIS MANUAL IS PREPARED FOR MORE THAN ONE MODEL IN COMMON.
YOUR APPLIANCE MAY NOT HAVE SOME OF THE FEATURES THAT ARE
EXPLAINED IN THIS MANUAL. PAY ATTENTION TO THE EXPRESSIONS THAT
HAVE FIGURES, WHILE YOU ARE READING THE OPERATING MANUAL.
General Safety Warnings
- This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
- WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements. Children less than 8 years
of age shall be kept away unless continuously supervised.
- WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire. NEVER try
to extinguish a fire with water, but switch off the appliance
and then cover flame e.g. with a lid or a fire blanket.
- WARNING: Danger of fire: do not store items on the
cooking surfaces.

5
- WARNING: If the surface is cracked, switch off the
appliance to avoid the possibility of electric shock.
- For hobs incorporating a lid, any spillage should be
removed from the lid before opening. And also the hob
surface should be allowed to cool before closing the lid.
- The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
- Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass and other surface
since they can scratch the surface, which may result in
shattering of the glass or damage to the surface.
- Do not use steam cleaners for cleaning the appliance.

6
- Your appliance is produced in accordance with all applicable local and international
standards and regulations.
- Maintenance and repair work must be made only by authorized service technicians.
Installation and repair work that is carried out by unauthorized technicians may
endanger you. It is dangerous to alter or modify the specifications of the appliance
in any way.
- Prior to installation, ensure that the local distribution conditions (nature of the gas
and gas pressure or electricity voltage and frequency) and the requirements of the
appliance are compatible. The requirements for this appliance are stated on the
label.
- CAUTION: This appliance is designed only for cooking food and is intended for
indoor domestic household use only and should not be used for any other purpose
or in any other application, such as for non-domestic use or in a commercial
environment or room heating.
- All possible security measures have been taken to ensure your safety. Since the
glass may break, you should be careful while cleaning to avoid scratching. Avoid
hitting or knocking on the glass with accessories.
- Ensure that the supply cord is not wedged during the installation. If the supply cord
is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
Installation Warnings
- Do not operate the appliance before it is fully installed.
- The appliance must be installed by an authorized technician and put into use. The
producer is not responsible for any damage that might be caused by defective
placement and installation by unauthorized people.
- When you unpack the appliance, make sure that it is not damaged during
transportation. In case of any defect; do not use the appliance and contact a qualified
service agent immediately. As the materials used for packaging (nylon, staplers,
styrofoam...etc) may cause harmful effects to children, they should be collected and
removed immediately.
- Protect your appliance against atmospheric effects. Do not expose it to effects such
as sun, rain, snow etc.
- The surrounding materials of the appliance (cabinet) must be able to withstand a
temperature of min 100°C.

7
During usage
- Do not put flammable or combustible materials, in or near the appliance when it
is operating.
- Do not leave the cooker while cooking with solid or liquid oils. They may catch fire
on condition of extreme heating. Never pour water on to flames that are caused by
oil. Cover the saucepan or frypan with its cover in order to choke the flame that has
occured in this case and turn the cooker off.
-Always position pans over the centre of the cooking zone, and turn the handles to
a safe position so they cannot be knocked or grabbed.
- If you will not use the appliance for a long time, plug it off. Keep the main control
switch off. Also when you do not use the appliance, keep the gas valve off.
- Make sure the appliance control knobs are always in the "0" (stop) position when
it is not used.
During cleaning and maintenance
- Always turn the appliance off before operations such as cleaning or maintenance.
You can do it after plugging the appliance off or turning the main switches off.
- Do not remove the control knobs to clean the control panel.
TO MAINTAIN THE EFFICIENCY AND SAFETY OF YOUR APPLIANCE, WE
RECOMMEND YOU ALWAYS USE ORIGINAL SPARE PARTS AND TO CALL ONLY
OUR AUTHORIZED SERVICE AGENTS IN CASE OF NEED.

·Create an opening with the dimensions shown in next picture. The distance
between the rear edge of the hob and any adjacent wall is depend on wall
surface. please don’t use easily combustible material like curtain, paper at
nearby hob.
8
INSTALLATION
The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to the
instructions in this guide and in compliance with the current regulations.
·Before connecting your appliance to the mains at home, make sure to
check the conformity of voltage settings, which are specified on the information
sticker attached to the appliance and/or packaking, with the usage conditions
available.
·The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance and contact an authorised service personal or a qualified
electrician immediately.
·This built-in hob is to be inserted into a cut out of a worktop.

9
·Apply the one-sided self-adhesive sealing tape supplied all the way round
the lower edge of the cooking surface along the outer edge of the glass
ceramic panel. Do not stretch it.
worktop mounting bracket
·Screw the 4 worktop mounting brackets on the side walls of product.

10
ELECTRICAL CONNECTION OF YOUR HOB
·Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
power rating of the hob.
·Electrical installation of the residence and the electrical current plug in
use must be earthed and conform with safety regulations.
·If there is no dedicated hob circuit and fused switch, they must be installed
by a qualified electrician before the hob is connected.
. Fused switch must be easily accessible once the hob has been installed.
·Do not use adaptors, multiple sockets and/or extension leads.
·This appliance conforms with the requirements ofthe following EEC
Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact with foods.
·A circuit breaker with a contact opening of at least 3mm, rated 25A and
delayed functioning type must be installed inside the supply circuit.
·For the vitroceramic hob, the cable must be H05VV-F 5X1,5mm² for 3
phase or 3X2,5mm² for single phase / 60227 IEC 53. You will find the
connection diagram shown on the bottom of your appliance.
3x2,5 mm² 220V~
3x2,5 mm² 230V~
3x2,5 mm² 240V~
3x2,5 mm² 220V~
3x2,5 mm² 230V~
3x2,5 mm² 240V~
5x1.5 mm² 380V 3N~
5x1.5 mm² 400V 3N~
5x1.5 mm² 415V 3N~
5x1.5 mm² 380V 3N~
5x1.5 mm² 400V 3N~
5x1.5 mm² 415V 3N~
Supply cable connection can be differ according to terminal box type.
/
· A circuit breaker with a contact opening of at least 3mm, rated 25A
anddelayed functioning type must be installed inside the supply circuit.
· For the vitroceramic hob, the cable must be H05VV-F 5X1,5mm² for
3phase or 3X2,5mm² for single phase / 60227 IEC 53. You will find
theconnection diagram shown on the bottom of your appliance.