VR Expert Pico G2 User manual
In the box
●1x Pico G2
●1x Pico motion controller
●1x Power adapter (USB-C) +
USB C cable
●2x AAA battery
Hardware
Pico G2 - Guide
Before you start
●Do not allow the lenses to come in contact
with periods of direct sunlight. This will
permanently damage the screen and does
not fall under warranty.
●The Pico controller is not essential to use the
Pico G2 .
Touchpad
Back button
Pico button
Status LED
Select button
Volume adjuster
Back button
Select button
Pico button
USB-C charging port
Power button
Speakers
Micro USB Port
3.5 mm Audio Jack
Volume adjuster
Microphone
How to install
1. Put on the Pico G2 and press the “Power-Button” for approximately 3
seconds.
2. The set up guide will start automatically.
a. Connect the controller if you want. - Otherwise click on skip.
b. Choose a language. - Then click “Ok”.
c. The buttons will be explained in the headset. - Click “Ok”
d. The privacy agreement will appear in the headset. - Accept them and
click “next”.
e. The radius will be explained - Click “continue”.
f. Warning window will appear - Read it, then click “I know”.
3. You are now at the main menu of the Pico G2. - Enjoy the ride!
How to connect Wi-Fi
1. Click on the Wi-Fi-Symbol in the task bar.
2. Click on “Wlan” to turn it on or off.
3. The headset will automatically search for any Wi-Fi in the area.
4. Choose your Wi-Fi and enter the password. - when done, click on the
“enter-key”.
5. Click on connect - the headset will connect to the chosen Wi-Fi.
VR Expert Tips
Pico button
The Pico button is located on the controller and on the headset. The button has the
Pico symbol on it.
●Pressing the Pico button for a few seconds will bring you to the main menu at
any time. The running application will be minimized, not closed.
●Double clicking the Pico button will open the task manager. You will be able to
’switch’ or close the active applications here.
●To ‘center’ the view, look straight ahead and hold the Pico button (either on
the headset or on the controller) for approximately 2 Sec.
Back button
●With the back button, you will be able to get to the previous page, but the
current application won’t close when you switch.
Pico G2 - Guide
How to download applications from store
1. Click on “Store” in the Pico main menu.
2. Create a Pico account in the device or register your account here
https://us-passport.picovr.com/register/regpre?lang=en_US
3. Search for the desired application in the store.
4. Click on download or buy.
5. The application will then appear in your library.
Developer Mode
1. From the home menu in the taskbar. Go to settings in the settings The
Symbol is next to the battery at top of the main menu..
2. Go to ‘About’. It’s the most right option. Click on it.
3. Click eight times on PUI Version. You are a developer now!
4. Navigate back to settings. On the right side of ‘about’ a { } - Symbol
with ‘advanced settings’ will appear. Click on it.
5. Now a 2D android settings menu will appear. Scroll down (click & drag) and
select”system”, then select “{ } developer options”.
6. Turn on USB debugging.
How to install my own application
1. Turn on the developer mode. (see explanation above).
2. Connect the computer with the Pico G2 through the USB cable.
3. Make sure USB debugging is on (see section “developer mode”)
4. Navigate to Pico G2 headset through windows file explorer.
5. Copy the APK to the Internal storage.
6. Go to the File manager in the headset.
7. At the top of the screen it will say ‘videos, images , APKs’. Select APKs
8. Select your APK to install it. Once ready you can start/open your application.
9. After installation, the application should be accessible on the right side of
the home menu.
Other Links:
●Starting development for the Pico? Please find the link below for the SDK.
https://developer.pico-interactive.com/sdk
●Native Pico ‘Kiosk mode’ information.
http://static.appstore.picovr.com/docs/KioskMode/index.html
Pico G2 - Guide
Other VR Expert Virtual Reality Headset manuals
