
1Connect the power cord into
the back of the charging cradle,
then plug the MobileCare
charging cradle into a power
outlet. Make sure the outlet is
NOT operated by a light switch
or power strip.
2Place the MobileCare in the
charging cradle and wait for a
welcome message. The diamond
shaped battery light will turn
green when fully charged.
4The Care Center will talk to
you from your MobileCare
mPERS unit. Let us know you
are a new client testing
your unit!
“This is the
Care Center. Do
you need help?”
3While leaving the MobileCare
in the charging cradle, press
your call button to activate
your unit.
MobileCare
Instruction Guide
If you have any questions or are in need
of assistance, do not hesitate to call us
at 1-800-860-4230.
MobileCare was created to provide you
comfort, reassurance and peace of mind
by making it possible for help
to be just a
touch of a button away.
You’re going places. Take us with you.
call button
“Your mobile
responder is
ready!”
“No thank you.
I’m a new client
testing my unit.”
Before you test your unit, make sure it is
completely charged
It is important to test your device monthly
to ensure device is working properly
Fall detection is not a perfect science.
If you are able, always press your help
button in the case of an emergency.
!
Multiple Flashing Lights - Device is
rebooting and attempting to connect
to the network. When this occurs, place
device on charging cradle.
Good
Moderate
Charge
MobileCare Light Guide
Signal Light
Battery Life
Strong
Moderate
No Signal