VStarcam C18S User manual

Video Tutorial
If it is your first time to use our products, it is recommended to scan the following
QR code to watch the video tutorial.

Product Description
HD Lens
Microphone
WiFi Antenna
IR Light
Ethernet Port
Power Interface
Reset Button
1Power on the camera, wait for the camera to finish booting.
2
Using a screwdriver to unscrew and open the back cover.
3
Hold the reset button for about 5 seconds until the camera makes a crisp sound.
Reset Camera：
TF Card
(Please unpack the back cover)

Camera Installation
1Punch the hole according to the hole position of the bracket.
2
Embed the expansion rubber plug.
3
Fix the bracket with screws and fix the camera on the stand.

Step 1 : Pre-Setup
Please do NOT connect a network cable to the camera.
Power on the camera and wait for about 30 seconds for the camera
to finish booting.
Connecting the phone to the WiFi and make sure know the exact WiFi
password .(only supports 2.4GHz)
It is recommended to place the camera within 2 meters of the router.
Please install the antenna of the camera.

Step 2 : APP Download and Registration
1 2
Search for "Eye4" in App Store
or Google Play, or scan the QR
code to download the app.
Click "Register", enter the user name
and password to complete the registration,
and also supports the third party such
as Facebook to login directly.

Step 3: Add Devices to the APP
1Open the app, click the "+" in the upper right corner , and scan the QR code
on the body of the camera, then follow the prompts on the app to complete
the adding. (Note: For Android phone, it will pop up some system permission
window, please select "Allow")

2If you can't find the QR code, click the "+" in the upper right corner, select
"Others"on the bottom right corner — "IP Camera"--- "AP mode adding"---
"There is a router", then follow the prompts on the app to complete the adding.

You re Done!
Please write down your device information:
Wait for about 30 seconds, it will search for the
device. Click "Add it", and then click "Setting"
---"WiFi" to complete the configuration.
Eye4 account name:
Eye4 account password:
‘

Configuring WiFi
Click " Settings"---”WiFi ", select the WiFi you want to connect, enter the WiFi
password. About 60 seconds the camera restarts and the configuration is complete.

No Router
Click on the "+" in the upper right corner , select "Others" --- "IP Camera" ---
"AP mode adding" --- "No router", then follow the prompts on the APP to finish
adding.

Device Share
Click "Settings", then select "Device Share"--- "QR Code Sharing". Other users
can open the app and click the "+" in the upper right corner of the homepage
to scan the QR code to add the device.

Cloud Storage
The camera supports cloud storage service. After activated the cloud storage service,
when the motion detection is triggered, the video will be uploaded to the cloud storage
server immediately, and the video can be viewed even if the camera is stolen.

After-Sales Service
Online customer service：
AM 8:30-12:00 PM 13:20-17:50 Night 19:00-23:00
on weekdays (UTC+8)
If you have any questions, please contact our
customer service: Click on "Me" in the lower right
corner of the APP. Select "Online Customer Service".
: [e-mail]
: www.vstarcam.com/support
F A Q
Official Mall：https://shop.vstarcam.com/
Email

物料编号：3-05-01-007-3042
封面材质：128g铜版纸（封面/封底覆光膜）
内页材质：128g铜版纸
尺寸：120x80mm
颜色：四色印刷
装订方式：骑马钉（一个钉）