VStarcam C38S User manual

Video Tutorial
If it is your first time to use our products, it is recommended to scan the following
QR code to watch the video tutorial.

Product Description
HD Lens
Reset Button
TF Slot
Microphone
Ethernet Port
WiFi Antenna
Power Interface
IR LED
Audio Output
Audio Input
2
Using a needle to hold on the reset button for about 5 seconds until you hear
a prompt "Reset completed".
1
Power on the camera and wait for the boot to complete.
Reset Camera：

Camera Installation
1Punch the hole according to the hole position of the bracket.
2
Embed the expansion rubber plug.
3
Fix the bracket with screws.
4
Rotate the camera counterclockwise to mount it on the bracket.

Step 1 : Pre-Setup
Connect your phone to the WiFi network (2.4GHz only).
Place the camera within 2 meters
of the router during configuration.
Power on the camera and wait for about 30 seconds to finish booting.
within 2m
（You can find the reset button from "Product Description")
If it is your first time to connect the camera, there is no need to reset it .
If you cannot hear " Please use APP for WiFi configuration" when the camera
startups , please reset the camera. : Using a needle to hold Reset method
on the reset button for about 5 seconds until you hear"Reset completed"

Step 2 : APP Download and Registration
1 2
Search for "Eye4" in App Store
or Google Play, or scan the QR
code to download the app.
Click "Register", enter the user name
and password to complete the registration,
and also supports the third party such
as Facebook to login directly.

Step 3: Add Devices to the APP
1Open the app, click the "+" in the upper right corner , and scan the QR code
on the body of the camera, then follow the prompts on the app to complete
the adding. (Note: For Android phone, it will pop up some system permission
window, please select "Allow")

2If you can't find the QR code, click the "+" in the upper right corner, select
"Others"on the bottom right corner --- "IP Camera"--- "Wireless installation",
then follow the prompts on the app to complete the adding.

You re Done!
Please write down your device information:
When you hear the camera prompts "Wireless con
-nection is successful", wait for about 30 seconds,
the binding page will appear on the app, click "Bind"
to complete the adding.
Eye4 account name:
Eye4 account password:
‘
Note: If the connection fails, please try to add it
with a network cable connection, or seek assista
-nce from online customer service.

Device Share
Click" "on the right corner, then select "Device Share"--- "QR Code Sharing".
Other users can open the app and click the "+" in the upper right corner of the
homepage to scan the QR code to add the device.

Cloud Storage
The camera supports cloud storage service. After activated the cloud storage service,
when the motion detection is triggered, the video will be uploaded to the cloud storage
server immediately, and the video can be viewed even if the camera is stolen.

After-Sales Service
Online customer service：
AM 8:30-12:00 PM 13:20-17:50 Night 19:00-23:00
on weekdays (UTC+8)
If you have any questions, please contact our
customer service: Click on "Me" in the lower right
corner of the APP. Select "Online Customer Service".
: [e-mail]
: www.vstarcam.com/support
F A Q
Official Mall：https://shop.vstarcam.com/
Email

物料编号：3-05-01-007-3041
封面材质：128g铜版纸（封面/封底覆光膜）
内页材质：128g铜版纸
尺寸：120x80mm
颜色：四色印刷
装订方式：骑马钉（一个钉）