Vxl itona mdyy User manual

Itona Mdyy with VESA Dock and Power Adapter Cradle
1
Installation Manual
Itona Mdyy with VESA Dock and
Power Adapter Cradle
1

Itona Mdyy with VESA Dock and Power Adapter Cradle
2
Revision History
Rev no.
Change Details
Created by
Date
A00
Creation
Krishna Raju N.R
4th Aug 14

Itona Mdyy with VESA Dock and Power Adapter Cradle
3
Unpack the Product
1. Cut open the top side of the carton.
2. Remove the accessory box from the carton.
1.Product Packaging Carton
2. Accessory Box
1 2
Dispose the Silica gel sachet.

Itona Mdyy with VESA Dock and Power Adapter Cradle
4
5
1
2
4 6 7 8 9
3
1.Monitor Side VESA Dock
2. Mdyy thin client with VESAdock and
power adapter.
3. Stand Side VESA Dock
4. Wall Inserts (4 Nos.)
5. M4x35 Wood Screws-Wall (4 Nos.)
6. M4x10 Screws-Monitor (4 nos.)
7. Splitter Cable
8. Power Cord (Optional/Country
Specific)
9. Cable Ties
Parts Identification

Itona Mdyy with VESA Dock and Power Adapter Cradle
5
Disassembly
1. Unscrew the captive screw holding the Stand Side VESA dock.
2. Slide and remove the Stand Side VESA dock.
3. Reverse the thin client to remove the Monitor Side VESA dock.

Itona Mdyy with VESA Dock and Power Adapter Cradle
6
1. Unscrew the captive screw holding the Monitor Side VESA dock.
2. Slide and remove the Monitor Side VESA dock.
Note: Do not remove the Monitor Side VESA dock if you do not intend to mount the client on a wall
stand. Refer to the next slide for more information.

Itona Mdyy with VESA Dock and Power Adapter Cradle
7
Methods of Mounting
Method 1: Hanging on Wall / Fixing on the Wall
Method 2: Mounting on a Wall Stand

Itona Mdyy with VESA Dock and Power Adapter Cradle
8
1. Drill 4 holes as per the center to center dimensions and details given below.
•Hole Diameter: 5 mm.
•Hole Depth: 35 mm.
•Insert wall Inserts into drilled holes.
100mm 100mm
Hanging on the wall Fixing on the Wall
100mm
Method 1: Hanging on the Wall / Fixing on the Wall

Itona Mdyy with VESA Dock and Power Adapter Cradle
9
2 to 3mm
Wall Insert
M4x35 Screw
Wall
9
2. Fix the M4 screws to the wall as shown in the following image.

Itona Mdyy with VESA Dock and Power Adapter Cradle
10
Using M4x35 wood screws, hang the Stand Side VESA dock on the wall as shown in the following figure.
Hanging on the Wall

Itona Mdyy with VESA Dock and Power Adapter Cradle
11
Fixing on the Wall
Using M4x35 wood screws, hang the Stand Side VESA dock on the wall as shown in the following figure.

Itona Mdyy with VESA Dock and Power Adapter Cradle
12
Incorrect Wall Side Dock Orientation
Correct Wall Side Dock Orientation

Itona Mdyy with VESA Dock and Power Adapter Cradle
13
1. Slide and fix the client to the Stand Side VESA dock as shown in the following figure.
2. Tighten the captive screw to fit the client in place.

Itona Mdyy with VESA Dock and Power Adapter Cradle
14
3. Connect the necessary cables.
DVI-I to VGA +DVI
Splitter Cable

Itona Mdyy with VESA Dock and Power Adapter Cradle
15
1. Using M4 screw, fix the Monitor Side VESA dock behind the monitor.
Method 2: Mounting on a Wall Stand
Preparing the Monitor

Itona Mdyy with VESA Dock and Power Adapter Cradle
16
Correct MonitorSide Dock Orientation
Incorrect Monitor Side Dock Orientation

Itona Mdyy with VESA Dock and Power Adapter Cradle
17
2. Fix the Stand Side VESA Dock using the M4 screws as show in the following image.
Note: Ensure that the Sliding guide is at the top.
Preparing the Wall Stand

Itona Mdyy with VESA Dock and Power Adapter Cradle
18
Correct Stand Side Dock Orientation
Incorrect Stand Side Dock Orientation

Itona Mdyy with VESA Dock and Power Adapter Cradle
19
1. Slide and fix the client to the Stand Side VESA dock as shown in the following figure.
2. Tighten the captive screw to fit the client in place.

Itona Mdyy with VESA Dock and Power Adapter Cradle
20
3. Slide the Monitor assembly into the VESA Dock on the Thin Client and fasten using
the Captive Screw.