
INSTALLATION INSTRUCTION
Fold out tabs (x4) on the side walls of the metal enclosure to set the correct height onto the studs.
WARRANTY STATEMENT
The V40CMBM is guaranteed for a period of 1 year from the date of purchase against defects
in workmanship and materials. Defects will be rectified by replacement of the product.
This warranty becomes null and void if, in our opinion, the product has been misused, incorrectly
installed, tampered with, or subject to power surges.
Vynco Industries (NZ) Limited
Christchurch Office
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P +64 3 379 9283 F +64 3 379 6838
www.vynco.co.nz
Auckland Office
9 Levene Pl, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P +64 9 525 6051 F +64 9 525 5799
www.vynco.co.nz
INSTALLER NOTES
1. Review meter dimensions (HxWxD) before installation.
2. This product is designed to be installed inside a wall cavity on its own.
3. The metal wall enclosure must be earthed.
4. This product is designed to be used with New Zealand and Australia’s MEN system.
5. DO NOT install a link between the neutral bars and earth bars on circuits dedicated to RCDs
6. Please ensure circuits and protective devices are adequately identified during installation.
7. Insert cover assembly, using 4 screws in the base corners.
V40CMBM – COMBINED DISTRIBUTION AND METER BOARD
20 WAY FLUSH PLASTIC WITH METAL BASE