Vynco VM17 User manual

PRODUCT INFORMATION
VM17/VM17L - DISTRIBUTION BOARD 17 WAY
SPECIFICATIONS
Rated Operational Voltage 415V AC maximum, 50Hz
Maximum Current 100A
Rated Insulation Voltage 1000V
Short Circuit Withstand 10kA
Degree of Protection IP40 – Indoor Use Only
Usage Recommended for use with copper conductors only
Number of Ways (Poles) 17 Ways – 1 row of 17 Ways
Maintenance This product does not require maintenance once
installed
DIMENSIONS AND WEIGHT
Height Width Depth Weight
Cover Assembly 323mm 402mm 35mm 2.0 kg
Base (cut out size) 277mm 355mm 93mm 1.8 kg
INSTALLER NOTES
EARTH AND NEUTRAL BUSBAR LAYOUT
Material Number
of bars
Double
screw
tunnels
Single
screw
tunnels
Earth Bar Brass Steel 1 3 12
Neutral Bar Brass Steel 1 2 8
RCD Neutral Bar Brass Steel 3 1 3
• The VM17 is guaranteed for a period of 1 year from the date of purchase against defects in
workmanship and materials.
• Defects will be rectied by replacement of the product.
• This warranty becomes null and void if, in our opinion, the product has been misused, incorrectly installed,
tampered with, or subject to power surges.
• The warranty does not include any labour or other associated expenses that may be involved in removal or
installation of the product.
• To obtain a replacement under this guarantee, return the goods (prepaid) to the place of purchase
(proof of purchase must be supplied).
WARRANTY STATEMENT
1. This product is designed to be
installed inside a wall cavity only (ush
mounting). Do not surface mount.
2. For surface mounting use VM17SK.
Surface mount enclosure in conjunction
with this board.
3. The metal wall enclosure must be
earthed.
4. Fold out tags (x4) on the side walls of
the enclosure can be folded out to set
the correct height onto the studs.
5. Door hinge pins are easily removable
and the door can be reversed so that it
swings either left or right.
6. This product is designed to be used
with New Zealand and Australia’s MEN
system.
7. DO NOT install a link between the
neutral bars and earth bar on circuits
dedicated to RCDs.
8. Please ensure circuits and protective
devices are adequately identied during
installation.
INSV0035

PRODUCT INFORMATION
VM17 - DISTRIBUTION BOARD 17 WAY
Fold out tabs to set height of
enclosure onto studs.
Fitting into wall cavity
Removing door
Rotate top pin 90°. Slide pin down to release door.
There is no need to remove pin
completely.
Lift and remove door.
1 2 3
INSV0035
VYNCO INDUSTRIES (NZ) LIMITED
Christchurch Ofce
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P [phone] F [phone]
E [email protected]
VYNCO.CO.NZ
Auckland Ofce
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P [phone] F [phone]