WA Library Supplies 6171 User manual

6171 Two Tier Browser Box
Parts Supplied:
Step 1: screw all
cam pins (K) into
metal screw holes in
parts (C), (F) & (G)
Step 2: Put bolt (J) through top of base
shelf (A) and rail (H), secure with bolt.
Aach castors (I) to rail.
A
I & J H
I & J H
Step 3: Build Tier Display Shelf for Top and Boom Shelf. Slot Divider Shelf
(D) holes facing to back of shelf, onto Dividers (E), then push in Front Panel
(C) into Dividers (E). Lock cam pins by turning cam locks 90 degrees. Do two
sets.
D
E
C
A B C D E F G
1 x Base Shelf
880mm x 380mm
1 x 2nd Tier
Base Shelf
880mm x 380mm
2 x Front Panel
880mm x 85mm
2 x Divider Shelf
880mm x 150mm
4 x Dividers
360mm x 165mm
2 x Side Panel
385mm x 600mm
2 x Metal
Rods
H
2 x swivel
2 x brake
castors
I
4 x Nut &
Bolt Set
J
38 x Cam
Pins
K
1 x Back Board
920mm x 600mm
Step 4: Build both shelves by
aaching Dividers onto Base Shelf
(A) and 2nd Tier Base Shelf (B)
Assembly Instrucons - PAGE 1

Step 5: Aach side panels (F) to the built shelves. Lay side panel on oor to push in shelves.
Lock cam pins by turning cam locks 90 degrees.
G
F
6171 Two Tier Browser Box
Assembly Instrucons - PAGE 2
Step 6: Aach Back Board (G) to shelves. Lock cam
pins by turning cam locks 90 degrees.to push in
shelves.
F
G