Wagan Brite Nite 4304 User manual

Item No. /: 4304
BriteNite™
Pop-UpUSBLantern™
User’s Manual
We are constantly improving our products so specifications are subject to change
without notice.

Brite Nite™Pop-Up USB Lantern™by Wagan Tech®
1
Thank you for purchasing the Brite Nite™Pop-Up USB Lantern™by Wagan Tech®.
With normal care and proper treatment, it will provide years of reliable service.
Please read all operating instructions carefully before use.
FEATURES
• CREE LED
• 3 light modes: High, Low and SOS
• Dual function flashlight and lantern
• Doubles as a power bank with USB output for charging your devices
• Rechargeable lithium battery
• 4 stage battery status indicator
• Dual hooks for hands-free lighting
• Strong magnetic base
• Compact and lightweight
Power button
Hooks
Magnets
Non-slip
grip pads USB port
USB cable
Battery
indicator lights

User’s Manual—Read before using this equipment
2
SPECIFICATIONS
Lumens 240 (high), 115 (low)
Run Time 6 hours (high), 12 hours (low)
Battery 3200mAh lithium polymer (3.7V)
Impact Resistance 1 meter
Beam Distance 150 meters
USB Output 1 A
CAUTION
• Never point the light beam directly into the eyes of another person
or animal.
• This product is not a toy: Do not allow children to play with or near
this item.
• Do not store in direct sunlight or near a heat source.
• Use for intended purposes only.
• Do not submerge in water.
• This product contains strong magnets that may cause interference with
pacemakers and other implanted medical devices when placed within a close
proximity. Keep this product at least 6 inches from your chest if you have a
pacemaker.

Brite Nite™Pop-Up USB Lantern™by Wagan Tech®
3
CHARGING THE INTERNAL BATTERY
This product may arrive partially charged. To get the maximum use, it is
recommended to fully charge the unit before use. In order to prolong the life of
the battery, be sure to fully recharge the unit every 3 to 6 months, even if the unit
has not been used.
Check the status of the battery by pressing the power button once. The number
of illuminated LEDs indicates the percentage of charge (25%-100%).
1. Unwind the USB cable and plug into any USB charger/power source.
2. While recharging, the status indicator lights will show the present battery
capacity. When the internal battery is fully charged, all indicator lights will be
solid. Charging time for a fully depleted battery is 7 hours.
Charging cable
Battery status
indicator
USB Port
CARE AND MAINTENANCE
• Periodically wipe the entire lantern with a soft clean cloth.
• To improve the ease of sliding the lantern up and down, add a small amount of
silicone lubricant to the lamp sliding surface

User’s Manual—Read before using this equipment
USAGE
Light
The Pop-Up USB Lantern has 3 light modes.
1. To turn unit on: press the power button 2 times for High mode (pressing once will
only show the battery status)
2. To change modes: press the power button to cycle through the modes once for
each mode (High > Low > SOS > OFF).
Pull up
to use as
a lantern!
Power Bank
The Pop-Up USB Lantern doubles as a portable power bank which allows you to
charge your devices when you need them.
1. Open the dust cover from the USB port
2. Connect a user-supplied USB cable to the USB power port
3. The battery indicator LEDs will illuminate.
4. After use, disconnect the USB cable and replace the dust cover.
If you’re looking for quality camp lighting, visit our website.