Wagan Wireless Handsfree Car Kit User manual

Item no. 2563
User”s Manual
Bluetooth® Wireless
Handsfree Car Kit

DC IN 5V
www.wagan.com
2
Bluetooth® Wireless Handsfree Car Kit by Wagan Tech
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
LED Indicator Battery Status Icon
LCD Display
Sun Visor Slot
Speaker
Charging Port
Earpiece Port
Volume +
A
B
Slide Out Microphone
Volume −
Multi-Function Button (MFB)

www.wagan.com
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
3
User’s Manual—Read before using this equipment
Thank you for purchasing the Bluetooth® Wireless Handsfree Car Kit by Wagan
Tech. With normal care and proper treatment it will provide years of reliable
service. Please read all operating instructions carefully before use.
PRODUCT DESCRIPTION
• The BLUETOOTH WIRELESS HANDSFREE CAR KIT consists of an easy
to operate rechargeable speakerphone, portable for use anywhere. It is
specially designed for connecting Bluetooth compatible mobile phones
without wires in the vehicle.
• You can enjoy the freedom of wireless communication, even if your car
engine is turned on or off. No power connection or connection to the mobile
phone is required to use this unit.
• Using the single-button control of the Handsfree, you can make and answer
calls without touching the phone. The unit works even if you leave the phone
in your pocket or anywhere inside the car.
• The built-in DSP circuit cancels and suppresses echo and background noise.
• This Handsfree car kit is specially designed for Bluetooth mobile phones or
other Bluetooth compatible devices that support the Handsfree or Headset
profiles.
Note: Bluetooth wireless technology is a worldwide specification designed for
low power consumption and short range based in a low cost system. It provides
links between mobile computers, mobile phones and other portable and handheld
devices, as well as connectivity to the internet.

www.wagan.com
4
Bluetooth® Wireless Handsfree Car Kit by Wagan Tech
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
GETTING STARTED
For the first time using the Handsfree, please:
• Charge Handsfree speakerphone unit with the provided charger for 3 hours.
• Ensure a mobile phone that supports Bluetooth functions is ready for pairing.
QUICK START GUIDE
Status Operation LED Indicator &
Sound
LCD Display
Switch On Slide the microphone out. 2 beeps rising
in tone sound
when turning on
the unit. Blue LED
flashes every
5 seconds,
indicating in idle
mode
HF009
>
BLUETOOTH
Connect/
Re-connect
(with paired
phone)
In idle mode, press Multi-
Function Key once or select
paired device “HF009” on
mobile phone, and then
select “Connect”.
Blue LED flashes
every second
indicating
searching for
paired devices.
If connected
to mobile with
Handsfree
Pro-file, blue
LED always
on indicates in
standby mode
Connecting
>
BLUETOOTH
>
A

www.wagan.com
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
5
User’s Manual—Read before using this equipment
Status Operation LED Indicator &
Sound
LCD Display
Switch Off Push the microphone back
in.
LED indicator
goes off
—
Pairing (for
the first time
using the
Handsfree)
1. Switch on the Handsfree.
2. Enable Bluetooth feature
of the mobile phone.
3. In the Bluetooth menu,
select “Add Device” or
“Search For Device”.
4. “HF009” appears in the
device list, press “Yes”.
5. Enter fixed pass
key “8888”. Pairing
completes.
6. Edit the device name
if you would like to
personalize it.
LED flashes blue
every 5 seconds,
indicating in
idle mode. If
connected with
Handsfree Profile,
blue LED always
on indicates in
standby mode.
Mobile phone
model name
>
Connecting
>
BLUETOOTH
Receive
Call
When Handsfree is ringing,
press Multi-Function Key
once
— Call number
>
Active Call
Reject Call When Handsfree is ringing,
press Multi-Function Key
twice.
— BLUETOOTH

www.wagan.com
6
Bluetooth® Wireless Handsfree Car Kit by Wagan Tech
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
Status Operation LED Indicator &
Sound
LCD Display
End Call During a call, press Multi-
Function Key once
— BLUETOOTH
Pairing for
a second
phone
1. Press the Multi-Function
button for 2 to 3 seconds
until “BLUETOOTH“
appears on the display.
2. Search for Bluetooth
devices from your second
phone.
3. Select “HF009“ from
the list.
4. Enter the fixed pass
key “8888“. Pairing
completes.
5. Edit the device name
if you would like to
personalize it.
LED flashes blue
every second,
indicating in
idle mode. If
connected with
Handsfree Profile,
blue LED always
on indicates in
standby mode
BLUETOOTH
>
Connecting
> A B
Redial last
number
In standby mode, press
Multi-Function Key twice.
— Redial
Voice dial In standby mode, press
Multi-Function Key once.
A tone from
the Handsfree
indicates the
phone is ready
to receive voice
tag.
Voice Call
>
Dialing

www.wagan.com
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
7
User’s Manual—Read before using this equipment
Status Operation LED Indicator &
Sound
LCD Display
Mute
microphone
During a call, click “+” and
“−” buttons together once.
Click again for unmute.
Single beep
sounds. (You can
still hear the other
side.)
MUTE MIC /
UNMUTE MIC
Adjust
Volume
Click “+” or “−” button to
control the volume up or
down.
—
VOL
Privacy call Connect external
headphone to headphone
port.
— —
Disconnect
with mobile
Press & hold “+” for 2
seconds. To reconnect to
phone, click Multi-Function
Key once
— BLUETOOTH
Low battery — LED flashes Red &
Blue, and single
beep sounds
Low Battery
Charging Connect to charger Solid red LED Charging
Charging
completed
Within 3 hours Red LED turns off BLUETOOTH
CHARGING
Charge with the DC charger (cigarette lighter adaptor). Switch on the Handsfree.
Connect the DC charger to the in-car cigarette lighter socket, and then to the
charging port of the Handsfree. The LED indicator will be constantly red.

www.wagan.com
8
Bluetooth® Wireless Handsfree Car Kit by Wagan Tech
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
• Maximum charging time: 3 hours
• Red LED indicator shuts off when fully charged
• Talking time: up to 13 hours
• Standby time: up to 220 hours
• Low battery signal: LED indicator flashes blue & red, single beep sounds until
Handsfree is recharged
• Do not charge for more than 24 hours
SWITCH ON / OFF
Switch on Handsfree
Simply slide out microphone across to the right from off mode; you will hear 2
beeps rising in tone sound and the LED indicator flashes blue.
Switch off Handsfree
Simply push the microphone back in, and the LED indicator turns off.
PAIRING WITH A PHONE
Before using the Handsfree, you must pair it with the mobile phone first. Once the
Handsfree and the phone have been paired. They store the ID of each other in
their memory. Thus they can re-connect to each other automatically. You can check,
delete or rename the paired device in the devices list of the mobile phone.
Multipoint Pairing and Connecting Phone “A”
1. Turn ON the Handsfree by simply pulling open the microphone. Wait for 10
seconds until HF009 reverts back to the default “Bluetooth” screen.
2. Ensure you mobile phone is within 1 meter distance and Bluetooth
functionality is activated. Search for Bluetooth devices (refer to your mobile

www.wagan.com
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
9
User’s Manual—Read before using this equipment
phone user manual).
3. When your mobile phone has detected the device, “HF009” will be
displayed on your mobile phone screen. Select “HF009” and proceed to
Pairing.
4. You will be requested to enter passcode “8888”. Depending on your phone
model select “HF009” and connect with the Handsfree.
5. On the Handsfree display screen your phone name or model will be
displayed.
6. Your first phone Paired will be regarded as the priority phone and will be
allocated as phone “A” each time you will turn on the Handsfree it will
automatically connect to this phone “A”.
Pairing and Connecting Second Phone “B”
While the Handsfree is connected to phone “A” press and hold the MFB (Multi-
Function Button) until the Handsfree displays “Bluetooth”. Follow steps 1 to 5 as
above. Your second phone will be allocated as phone “B”.
Switching Between phones
While both phones are connected press and hold the MFB until the Handsfree
displays the phone name you want.
Re-connecting Phone “B”.
With Phone “A” connected, press and hold the MFB until the Handsfree displays
Bluetooth. Now press the MFB for 1 second, and the Handsfree will initiate
connection to your phone “B”. You can revert back to phone “A” by pressing and
holding the MFB.
CHECK RECORDS / DIAL FROM PHONE BOOK
1. In standby mode, press & hold “Volume −” button for 2 seconds to enter

A
B
C
D
Calvin
Candice
Carl
Cathy
5551234 Make Call
Click Multifunction
Key Once: Select Current
Double Click Multifunction
Key: Go Back 1 Level
2. 3. 4. 5.
1.
Select contact
name.
Phone number
is shown.
Select to dial.
Dialing
www.wagan.com
10
Bluetooth® Wireless Handsfree Car Kit by Wagan Tech
©2010 Wagan Corporation. All Rights Reserved
Wagan and wagan.com are trademarks used by Wagan Corporation
phone book menu.
2. LCD displays letter “A”. This is the 1st level of the menu, click “Volume +” or
“Volume −” to move to other letters. The phone book records the 1st letter of
the names which are listed in alphabetical order. Other symbols are listed in
“ [ “.
3. Click the Multi-Function Key to select the desired letter. This is the 2nd level of
the menu. The names under the selected letter will be shown. Click “Volume
+” or “Volume −” to move to other names.
4. Click the Multi-Function Key to select the desired name. The phone number
will be shown.