WAGO WAGO-PERSPECTO 762 Series User manual

Manual
WAGO PERSPECTO
®
762
762-1035
WP 35 QVGA
PERSPECTO
® WP - Web Panel
Version 1.4.1

2 WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
© 2018 WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.

WAGO PERSPECTO® 762 Table of Contents 3
762-1035 WP 35 QVGA
Manual
Version 1.4.1
Table of Contents
1Notes about this Documentation ............................................................. 5
1.1 Scope of Validity ..................................................................................... 5
1.2 Copyright ................................................................................................ 5
1.3 Symbols ................................................................................................. 6
1.4 Number Notation .................................................................................... 8
1.5 Font Conventions ................................................................................... 8
2Important Notes ........................................................................................ 9
2.1 Legal Bases ............................................................................................ 9
2.1.1 Subject to Changes ............................................................................ 9
2.1.2 Personnel Qualification ...................................................................... 9
2.1.3 Use of the 762 Series in Compliance with Underlying Provisions ....... 9
2.1.4 Technical Condition of Specified Devices........................................... 9
2.2 Safety Advice (Precautions) ................................................................. 11
2.3 Characteristics of the CODESYS Web Visualization ............................. 13
2.3.1 Description of the Function "CookieHandling()" ................................ 14
3Device Description .................................................................................. 15
3.1 PERSPECTO WP Web Panel .............................................................. 15
3.2 View ..................................................................................................... 16
3.2.1 Front View ........................................................................................ 16
3.2.2 Back View ........................................................................................ 17
3.3 Connectors ........................................................................................... 18
3.3.1 X1 – Supply Voltage ........................................................................ 18
3.3.2 X6 – ETHERNET Interface............................................................... 19
3.3.3 X8 – USB Interface .......................................................................... 20
3.4 Battery Case ......................................................................................... 21
3.5 Slot for Memory Card ........................................................................... 22
3.6 Operating Elements .............................................................................. 23
3.6.1 Service Button.................................................................................. 23
3.7 Technical Data ..................................................................................... 24
3.7.1 Housing............................................................................................ 24
3.7.2 Power Supply ................................................................................... 24
3.7.3 Display ............................................................................................. 24
3.7.4 Hardware ......................................................................................... 25
3.7.5 Software........................................................................................... 25
3.7.6 Interfaces ......................................................................................... 25
3.8 Approvals ............................................................................................. 26
3.9 Standards and Guidelines .................................................................... 26
4Mounting .................................................................................................. 27
4.1 Front Panel Installation ......................................................................... 27
5Connect Devices ..................................................................................... 29
5.1 Supply voltage ...................................................................................... 29
5.2 Grounding............................................................................................. 29
5.3 Peripheral Devices ............................................................................... 29
6Commissioning ....................................................................................... 30

4 Table of Contents WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
6.1 Switch on .............................................................................................. 30
6.2 IP Address of the Device ...................................................................... 31
6.2.1 General ............................................................................................ 31
6.2.2 Setting the IP Address ..................................................................... 31
6.2.3 IP Address ....................................................................................... 32
6.3 The WAGO Control Center ................................................................... 33
6.3.1 Starting the WAGO Control Center .................................................. 33
6.3.2 “General” Tab .................................................................................. 34
6.3.3 “Autostart Applications” Tab ............................................................. 35
6.3.4 “Users” Tab ...................................................................................... 36
6.3.5 “FTP” Tab ........................................................................................ 37
6.3.6 “HTTP” Tab ...................................................................................... 38
6.3.7 “RAS” Tab ........................................................................................ 39
6.3.8 “Backup/Restore” Tab ...................................................................... 40
6.3.9 "Advanced" Tab ............................................................................... 41
6.3.9.1 Read Memory Consumption ........................................................ 41
6.3.10 Saving the Configuration .................................................................. 43
6.4 Optimizing Web Visualization ............................................................... 44
6.4.1 Starting the Java Virtual Machine as an Applet Viewer .................... 44
6.4.2 Starting Internet Explorer in Full-Screen Mode ................................. 44
6.4.3 Adjustments in the WEBVISU.htm of the Controller ......................... 45
7Service ..................................................................................................... 46
7.1 Battery Maintenance ............................................................................. 46
List of Figures .................................................................................................. 47
List of Tables .................................................................................................... 48

WAGO PERSPECTO® 762 Notes about this Documentation 5
762-1035 WP 35 QVGA
Manual
Version 1.4.1
1 Notes about this Documentation
The WP 35 QVGA 762-1035 shall only be installed and operated according to the
instructions in these operating.
Always retain this documentation!
This documentation is part of the product. Therefore, retain the documentation
during the entire service life of the product. Pass on the documentation to any
subsequent user. In addition, ensure that any supplement to this documentation
is included, if necessary.
1.1 Scope of Validity
This documentation applies to PERSPECTO-Panel 762-1035 (WP 35 QVGA).
1.2 Copyright
This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.

6 Notes about this Documentation WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
1.3 Symbols
Personal Injury!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Personal Injury Caused by Electric Current!
Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.
Personal Injury!
Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Personal Injury!
Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
Damage to Property!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Damage to Property Caused by Electrostatic Discharge (ESD)!
Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.
Important Note!
Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.

WAGO PERSPECTO® 762 Notes about this Documentation 7
762-1035 WP 35 QVGA
Manual
Version 1.4.1
Additional Information:
Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).

8 Notes about this Documentation WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
1.4 Number Notation
Table 1: Number Notation
Number Code
Example
Note
Decimal
100
Normal notation
Hexadecimal
0x64
C notation
Binary
'100'
'0110.0100'
In quotation marks, nibble separated
with dots (.)
1.5 Font Conventions
Table 2: Font Conventions
Font Type
Indicates
italic
Names of paths and data files are marked in italic-type.
e.g.: C:\Program Files\WAGO Software
Menu
Menu items are marked in bold letters.
e.g.: Save
>
A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New
Input
Designation of input or optional fields are marked in bold letters,
e.g.:
Start of measurement range
“Value”
Input or selective values are marked in inverted commas.
e.g.: Enter the value “4 mA” under
Start of measurement range
.
[Button]
Pushbuttons in dialog boxes are marked with bold letters in square
brackets.
e.g.: [Input]
[Key]
Keys are marked with bold letters in square brackets.
e.g.: [F5]

WAGO PERSPECTO® 762 Important Notes 9
762-1035 WP 35 QVGA
Manual
Version 1.4.1
2 Important Notes
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
2.1 Legal Bases
2.1.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
2.1.2 Personnel Qualification
All sequences implemented on Series 762 devices may only be carried out by
electrical specialists with sufficient knowledge in automation technology. These
specialists must be familiar with the current standards and guidelines for the
devices and the automated environments.
All changes to the controller shall always be performed by qualified personnel
with sufficient skills in PLC programming.
2.1.3 Use of the 762 Series in Compliance with Underlying
Provisions
762 Series modules are suitable for use in the area of time control and
automation. Their use extends beyond residential and commercial areas, as well
as industrial areas. Technical data must be observed for all types of applications.
Radio interference in residential areas
This is a class A device. This device can cause radio interference in residential
areas. In this case, the operator may be required to take appropriate measures.
2.1.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The

10 Important Notes WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
• Repairs,
• Changes to the hardware or software that are not described in the
operating instructions,
• Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO Kontakttechnik GmbH & Co. KG.
Pixel error in TFT display
Any pixel errors of the TFT display due to production reasons do not represent
grounds for complaint!

WAGO PERSPECTO® 762 Important Notes 11
762-1035 WP 35 QVGA
Manual
Version 1.4.1
2.2 Safety Advice (Precautions)
For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:
Do not work on devices while energized!
All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.
Install only in appropriate housings, cabinets or in electrical operation
rooms!
The device is an open unit. As such, install it exclusively in appropriate housings,
cabinets or in electrical operation rooms. Allow access to authorized staff only by
means of specific keys or tools.
Replace defective or damaged devices!
Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.
Protect the components against materials having seeping and insulating
properties!
The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for
handling devices/modules.
Clean only with permitted materials!
Clean housing and soiled contacts with propanol.

12 Important Notes WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
Do not use any contact spray!
Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.
Do not use in telecommunication circuits!
Only use devices equipped with ETHERNET or RJ-45 connectors in LANs.
Never connect these devices with telecommunication networks.
Avoid electrostatic discharge!
The devices are equipped with electronic components that may be destroyed by
electrostatic discharge when touched. Please observe the safety precautions
against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the
devices, please ensure that environmental factors (personnel, work space and
packaging) are properly grounded.

WAGO PERSPECTO® 762 Important Notes 13
762-1035 WP 35 QVGA
Manual
Version 1.4.1
2.3 Characteristics of the CODESYS Web Visualization
Depending on the version of CODESYS installed
The functionality of the Web visualization depends on the version of CODESYS
"webvisu.jar" Java applet used.
This file is normally the same version as the CODESYS version installed. The
general function of the file is the responsibility of the company 3S. The version
and function be explicitely checked. Always use the most current CODESYS
version from the WAGO-I/O-PRO-CD released by WAGO Kontakttechnik GmbH
& Co. KG.
Please also observe the chapter "CODESYS Web Visualization" in the
CODESYS online help.
The file "webvisu.htm" is the base HTML page for Web visualization and is
copied when installing the WAGO-IO-PRO or WAGO-AUTOMATION-COCKPIT
to the subdirectory <3S Software Installation Directory>\Visu.
Settings can be made in this file to optimize and adjust Web visualization.
Observe the CODESYS online help, chapter "Editing the 'webvisu.htm' file" and
chapter "Optimization of the Web Visualization" > "Adjustments in the
WEBVISU.htm of the Controller".
Limitations of the CODESYS Web visualization
The CODESYS Web visualization contains some limitations and particularities.
In connection with the Web panel, the following description must be observed for
continuous operation: To use this file with the WAGO Web panel, the call for the
function "CookieHandling()" is disabled.
Depending on the visualization elements and Web server used, memory
requirements may continuously increase in the panel. Please regularly check the
memory requirements of the panel. Observe the chapter "The WAGO Control
Center" > "Advanced Tab".

14 Important Notes WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
Response time depends on the number, type and form of the objects
displayed
This device has been designed for presentation of simple CODESYS Web
visualizations. The device establishes communication with a controller (e.g. from
the series 750-88x or 758-8xx) and displays the visualization pages stored there.
Due to the limitations of the technologies used, the following points should be
observed:
The response time depends on the number, type and form of the objects
displayed. The fewer the objects displayed per page, the faster the device
responds.
More time is required the first time a visualization page is called up than
subsequent calls.
There is a delay the first time a visualization page is displayed because it is first
fully compiled in the working memory.
Should it take more than 1 second to compile, a message appears with the text
"Loading ..." to indicate that background activity is underway. When switching to
another visualization page, a copy of the page remains in the cache and
subsequent calls of the page are much faster. Because the size of the cache is
limited, it may not always be possible to store all pages in memory entirely
depending on the application. As a result, you may experience delays later when
calling up the same page.
2.3.1 Description of the Function "CookieHandling()"
The use of this Java Script function results in a continuous memory consumption
on the Web panel.
The last set language for dynamic texts is stored by this mechanism and is
automatically reset at the next call-up of the Web visualization.
This function is not possible on the Web panels. The response corresponds with
that of an Internet browser that does not accept cookies.

WAGO PERSPECTO® 762 Device Description 15
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3 Device Description
The 762 Series panels are used to operate and visualize the controllers of the
WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT
development environment is used to program the panels and controllers.
3.1 PERSPECTO WP Web Panel
Featuring specialized software, the Web Panel functions as Web browser,
connecting a controller with its own Web server.
With the Web Panels, more control units are easy to add.
The display of CODESYS 2.3 Web visualization is optimized for the Web Panel.
The Web Panels are simple display and HMI devices and have no CODESYS
and HMI runtime of their own.

16 Device Description WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3.2 View
3.2.1 Front View
Figure 1: Front View
Table 3: Legend for Figure “Front View”
No.
Description
1
Front panel
2
Touch screen display

WAGO PERSPECTO® 762 Device Description 17
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3.2.2 Back View
Figure 2: Back View
Table 4: Legend for Figure “Back View”
No.
Designation
Description
1
-
Housing
2
X6
ETHERNET interface as RJ45 jack
3
X2
RS-485 serial interface (COM 2) as RJ45 jack
(without function)
X5
CAN-Bus 0 (CANopen) interface as RJ45 jack
(without function)
4
X8
USB host interface
5
Service
Service button
6
3V Battery
CR2032 Battery case
7
X1
Connection for 24VDC power supply
8
X13
Slot for micro SD memory card

18 Device Description WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3.3 Connectors
3.3.1 X1 – Supply Voltage
Use the X1 connection for the device power supply. More information about the
power supply and power consumption is available in the "Technical Data"
section.
Figure 3: Connector X1 – Supply Voltage
Table 5: X1 Pin Assignment
Pin
Assignment
Function
1
+24 V
Supply Voltage
2
0 V GND
Reference potential GND
3
FE
Ground conductor

WAGO PERSPECTO® 762 Device Description 19
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3.3.2 X6 – ETHERNET Interface
An RJ45 jack is used for the ETHERNET interface.
The connections and cables must meet CAT.5 and the guidelines for ETHERNET
interfaces.
If there are more than 2 devices in a network, then they must be connected to
each other by a HUB or SWITCH. A "1:1" cable is used here.
If there are only 2 devices in a network, a crossover cable can be used.
Figure 4: Connector X6 ‒ ETHERNET RJ45
Table 6: X6 Pin Assignment
Pin
Assignment
Function
1
TX+
Transmit Data +
2
TX-
Transmit Data -
3
RX+
Receive Data +
4
n.c.
-
5
n.c.
-
6
RX-
Receive Data -
7
n.c.
-
8
n.c.
-

20 Device Description WAGO PERSPECTO® 762
762-1035 WP 35 QVGA
Manual
Version 1.4.1
3.3.3 X8 – USB Interface
The interface is designed as a USB host interface, type A.
The following table and illustration provide information on the pin assignment of
the interface. The interface connection meets the USB specification 2.0.
Figure 5: Connector X8 – USB Interface
Table 7: X8 Pin Assignment
Pin
Assignment
Function
1
USB_VCC1
USB +5V DC
2
USB_N1
USB data line N1
3
USB_P1
USB data line P1
4
USB_GND
USB GND