5
7
6
8
13. Do not drop or insert any object into any
opening.
14. Care should be taken to avoid contact with
the skin, the face and neck.
15. Do not use with a voltage converter.
16. Allow the appliance to cool before storing
away.
17. Use this appliance only for its intended
purpose.
18. When the hairdryer is used in the bathroom,
unplug it after use since the proximity of
water presents a hazard even when the
hairdryer is switched off.
19. For additional protection, the installation of a
residual current device (RCD) having a rated
residual operating current not exceeding
30 mA is advisable in the electrical circuit
supplying the bathroom.
Ask your installer for advice.
(NOTE: Mains sockets might not be permitted
in average sized bathrooms according to
local wiring regulations).
WARNING: DO NOT USE THIS APPLIANCE NEAR
BATHTUBS, SHOWERS, BASINS OR OTHER VESSELS
CONTAINING WATER.
WARNING: YOU MUST SELECT THE CORRECT
VOLTAGE BEFORE PLUGGING IN YOUR HAIRDRYER.
OPERATING INSTRUCTIONS
Please check the correct voltage requirements for the country
you are travelling to as incorrect voltage will irrevocably damage
the dryer. Please ensure it is switched back to high voltage if you
intend to use it in the UK.
HIGH VOLTAGE (220-240V)
For use on high voltage, the dual voltage switch
must be placed in the 240V position.
LOW VOLTAGE (110-130V)
For use on low voltage, the dual voltage switch
must be placed in the 115V position.
HEAT SETTINGS
The Wahl Travel Hairdryer has 2 temperature settings, 2 speed
settings.
• High heat high speed
• Low heat low speed
115V
240V
115V
240V
The barrel of your hairdryer can be folded against the handle
for travel purposes.
STYLING TIPS
After washing :
Gently towel dry hair to remove excess water.
Make use of the variable heat settings at different stages of the
styling to achieve maximum results.
Do not concentrate airow on any one area for an extended
period of time.
CONCENTRATOR NOZZLE
Attach the concentrator nozzle onto the barrel of your hairdryer
for directional blow drying, ideal for applying direct heat to
concentrated areas.
DIFFUSER
When using a diffuser, the hairdryer should be used on low
heat settings. Do not use at high temperatures as overheating
can cause damage to both the hairdryer and diffuser. Attach the
diffuser onto the barrel of your hairdryer and move through the
hair for volume.
REPAIRS
Do not attempt to repair this appliance yourself. Repairs can
only be made by qualied service personnel with special
tools. Repairs by under qualied persons will invalidate the
guarantee, and may result in accident or injury. If the hairdryer
fails to work properly when purchased, return it to the retailer
from which it was purchased.
CLEANING AND MAINTENANCE
1. Always unplug the hairdryer before cleaning.
2. Do not immerse in water.
3. Use a slightly damp cloth to clean the body of the hairdryer,
and dry with a clean cloth.
4. Store the appliance in a drawer or hang up away from dust
and moisture.
5. The hairdryer is tted with a detachable lter cover which
may be removed for cleaning. To remove the lter cover,
twist it anti-clockwise. Use a small brush to remove dust
and hair from the lter screen (wash in warm soapy water if
necessary). Ensure the lter cover is completely dry before
tting back onto the hairdryer. To ret the lter cover, align
in place and twist clockwise to lock into position.
It is recommended that this lter is removed regularly for
cleaning, and thereby allowing air to ow freely through the
motor and fan unit.
TROUBLESHOOTING
Problem Possible Cause Solution / Hint
Smoke
comes out
of the hair
or from the
appliance
during use.
You have
put products
on your hair
(for example,
mousse, spray
or gel).
This is normal if you use products
to style. Never put any product in
your hair that is not suitable for use
with high temperature appliances.
Do not use gel or wax. Use only
styling products specically
designed for this purpose.
The switch
is not on the
correct voltage.
For use in the United Kingdom
the dual voltage switch must be
placed in the 240V position.
For use internationally the dual
voltage switch may need to be
changed. Check the voltage for
the country before you plug in
the dryer (see page 6 for further
details).
