Wali STT007 User manual
Place Shelf A on a flat surface with bottom upward, insert the Left and Right Bracket D E to the screw on Shelf A .
Shelf
A(X1)
Nut
F(X4)
Drawer
B(X1)
Anti-skid Pad
G(X4)
Support Stand
C(X2)
Supplied Parts List
Step 1
2
A
E
E
Caution:
E
D
D
A
A
L
R
Left Bracket
D(X1)
Right Bracket
E(X1)
Strap
I(X4)
Wrench
H(X1)
A
R
E
D
R
L
Please make sure Shelf A is in the same direction as image shown (Tip: Check the two holes facing the correct
direction). Please make sure Left and Right Bracket D , E are installed in the same direction as image shown.
A
DE
C
Step 2
Step 3
3
FF
H
------------
------------
- ------
- ------
-----
------------
A
A
C
G
C
A
------------
------------
Insert Support Stand C to the screw on Shelf A . Fix the Support Stand using Nut F and tighten with Wrench H.
(Do Not Overtighten)
Tear off the Anti-Skid Pad G and attach it to the bottom designated position of Support Stand C as the image shown.
AF
C
G
C
H
Step 4
4
B
B
Keep Drawer B in the same direction as the image shown. Slide it into the slot of Bracket D E .
BDE
