Walker Edison DW52ING3DR User manual

P.1
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. .alkeredison.com
Revised 22/04/2020 (L)
alker Edison
TM
Item#:DW52ING3DR
AssemblyInstructions

Insert wooden dowel (A) into parts (3,4,7) as per diagram.

Secure cam bolt (B) into parts (1,3,4,) with Philips head screwdriver as per diagram.

Pick up the slider arm (T) and separate the slide Runner for the following Steps. Extend
the Slide .Runner all the way forward,press the plastic release lever of the slider arm up
and pull the Slide Runner Complete out .

Using screw (M) attach drawer slider (T) to parts (3,4) with Philips head screwdriver as per diagram.

Using cam lock(C) secure part (3) to parts (7) with Philips head screwdriver as per diagram.

Using cam lock(C) secure part (4) to parts (7) with Philips head screwdriver as per diagram.

Using cam lock(C) secure parts (3,4) to part (1) with Philips head screwdriver as per diagram.

Using bolt (H) attach part (3) to part (8) with Hex key (Q) , then put part (6) as per diagram.
Note: Do not fully tighten all bolts .

Using bolt (H) attach part (8) to part (1) , bolt (E) attach part (5) to parts (3,4) with Hex key (Q) ,
then put part (6) as per diagram.

Using screw (S) attach parts (9) to part (5) with Philips head screwdriver as per diagram.

Using bolt (F) attach part (2) into parts (1,8) with Hex key (Q) as per diagram.
Note:Fully tighten all bolts.

Using screw (L) secure plastic wedge (K) to part (6) with Philips head screwdriver as per diagram.

Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 13
P.17
10 11
T T
M
M
M
M
M
M
M
M
M
M
M
M
T T
15 16
X 2
Using screw (M) attach drawer slider (T) to parts (10,11,15,16) with Philips head screwdriver as
per diagram.

Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 14
P.18
10
11
12
R
R
R
R
R
R
R
R
15
17 16
X 2
Using screw (R) attach parts (10,11) to part (12), parts (15,16) to part (17) with Philips head
screwdriver as per diagram.

Secure cam bolt (B) into parts (13,18) and using bolt (P) attach parts (13,18) to handle (N)
with Philips head screwdriver as per diagram.

Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 16
P.20
12
14
14
15
16
17
X 2
Put parts (14) as per diagram.