Walker Edison W58BMHPAS User manual

P.1
Item # : W58BMHPAS
®
TM
Assembly Instructions
Revised 04/23/2018
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Parts List
1
2
3
4
5
6
7
8
12
9
10
11
11
11
11
11
8
12

Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
A
Philips head screwdriver required for assembly
(not included)
P.4
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
B
C
D
E
F
G
H
J
K
pcs
pcs
pcs
pcs
pcs
pcs
pcs
pcs
L
M
N
P
Q
pcs
pcs
pcs
20 pcs
Wooden dowel
Ø8x30mm
pcs
pcs
R
Spcs
Tpcs
pcs
pcs
Cam lock
Ø15x11mm
Ø6x35mm Cam bolt
14
14
Ø6x50mm 6
Bolt
2
Ø4x22mm Handle Bolt 4
Handle
Door Hinge 2
Door Hinge 2
Plastic pivot 4
Screw
Ø3x17mm 16
Screw
Ø3x12mm 8
1
Glue tube
Plastic wedge 16
1
Ø30mm 14
Sticker
M 4 Hex Key
2
Door stopper 1
20
Bolt
Bolt
Ø6x12mm
Upcs
Screw
Ø3x15mm 2

Step 2
Step 1
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.5
1
B
B
B
B
B
B
43
5
76
A
A
A
A A
A
A
AA
A
A
A
A
A
A
A
A
A
A
A
Attach cam bolt (B) to part (1) with screwdriver.
Insert wooden dowel (A) into part (3,4,5,6,7).

Step 4
Step 3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.6
B
B
BB
B
B
BB
45
3
5
Attach cam bolt (B) to part (4,5) with screwdriver.
Attach cam bolt (B) to part (3,5) with screwdriver.

Step 6
Step 5
P.7
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
21 3
C
C
C
C
4
7
7
5
Attach part (4) to part (7), then insert and secure cam lock (C) to part (7) to lock it.
Attach part (5) to part (7), then insert and secure cam lock (C) to part (7) to lock it.

Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 8
Step 7
P.8
21 3
21 3
C
C
C
C
5
6
6
3
Attach part (5) to part (6), then insert and secure cam lock (C) to part (6) to lock it.
Attach part (3) to part (6), then insert and secure cam lock (C) to part (6) to lock it.

Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 10
Step 9
P.9
6
3
5
4
7
8
8
2
D x6
S
4
5
3
Slide back panel (8) into grooves as per diagram.
Attach part (2) to part (3,4,5) using bolt (D) with hex key (S).

Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Step 12
Step 11
P.10
11
11
11
11
11
2
12
4
5
3
6
7
12
N
N
S
Attach part (11) to part (2) using bolt (N) with hex key (S).
Slide back panel (12) into grooves as per diagram.