Wasp SMART WIND SENSOR User manual

SMART WIND SENSOR USER MANUAL
Read the wind – lift your performance
WASP WS Final. Adjusted.indd 1 12/11/18 2:49 pm

Congratulations on purchasing the WASP Smart Wind Sensor which offers a new
dimension in performance measurement.
The WASP smart wind sensor measures both wind speed AND direction along with
ground speed, and climb rate. All this enables precise calculation of total exerted
power of your cycling in real time.
In conjunction with the wind sensor, WASP offers atmospheric pressure, temperature
and humidity readings to get even more accurate computations.
Unlike other systems, WASP allows you to individually analyse the power output for
wind, rate of climb and acceleration.
By measuring your power and seeing these effects independently, you are able to
pinpoint weaknesses and concentrate on improving them to strengthen your overall
performance.
Smart wind sensor
WASP Smart Wind Sensor works with Android App. Download the app from www.thewaspworks.com
or Android Play Store. Please note, this device is not suitable for wet weather riding.
WASP WS Final. Adjusted.indd 2 12/11/18 2:49 pm

WASP wind sensor components
Wasp Smart Wind Sensor
Handlebar mounting bracket
(Garmin compatible)
USB micro charging cable
WASP WS Final. Adjusted.indd 3 12/11/18 2:49 pm

How WASP wind sensor works
Measure altitude
Measure ground speed
and direction
Measure wind speed
and direction
POWER
ATTENTION: Please fully charge WASP smart wind sensor
before use. Plug accompanying USB charger cable into a
USB port or USB charger adaptor.
WASP WS Final. Adjusted.indd 4 12/11/18 2:49 pm

Mounting WASP sensor
Hold WASP sensor unit at
right angles above mounting
bracket. Move unit down and
lock into bracket head.
Turn unit face forward, the unit
automatically powers on and is
ready to log your ride.
Start the WASP smart phone
app to save data.
Good to go!
WASP WS Final. Adjusted.indd 5 12/11/18 2:49 pm

Power on WASP
Start your ride
Set up screens
WASP reset button
WASP WS Final. Adjusted.indd 6 12/11/18 2:49 pm

Set up Bluetooth devices
1. Tap to start Bluetooth scan.
3a. Tap to set WASP wind velocity sensor.
3b. Tap to set heart rate sensor.
3c. Tap to set cadence sensor.
2. Tap Bluetooth device to highlight, then tap
on appropriate device above.
WASP WS Final. Adjusted.indd 7 12/11/18 2:49 pm

Set up bike
Set up bike
parameters
Set up rider
Enter your details.
Enter your weight.
This is important.
Enter your bike
weight.
This is important.
WASP WS Final. Adjusted.indd 8 12/11/18 2:49 pm

Set up WASP wind
sensor parameters Log your ride
Once the system is
set up you’re ready
to ride.
Just clip your WASP
Wind Sensor onto
the mounting
bracket, and it will
start.
Tap to log your
ride session.
Set WASP parameters.
All settings are
mandatory.
Please visit www.
thewaspworks.com
to learn more.
WASP WS Final. Adjusted.indd 9 12/11/18 2:49 pm

Start your ride
Blue tooth devices.
Green – connected
Red – not connected
Yellow – not configured
Pause/resume recording
Start/stop recording
Now you’re ready to ride.
Tap the start button and go.
Swipe the screen left/right to
display data that suits your
needs.
The WASP smart wind sensor is a
sophisticated sensing unit and as
such needs to be treated with care.
WASP is not suitable for wet weather
riding as water may enter the sensing
unit. Dust may also enter the sensing
unit. If you suspect that the WASP
sensor unit is not working as it should
it may have been contaminated by
water or dust ingress.
Please visit www.thewaspworks.com
for instructions on how to carry out
maintenance on the sensing unit.
Caring for your WASP
WASP WS Final. Adjusted.indd 10 12/11/18 2:49 pm

Parameter Accuracy Resolution
Wind direction 1± 3.0° @ ± 60° forward motion 1°
Wind speed 1± 0.5 m/s from 2-15 m/s 0.1 m/s
Altitude 1± 0.5 m 0.1 m
Ground speed 20.05 m/s 0.1 m/s
Ground bearing 20.3° 0.1°
Temperature 3± 1° 1°
Relative Humidity 3± 3 % RH 1 % RH
Atmospheric pressure 3± 5 Pa 1 Pa
Weight 75 g excluding mount 107 g including mount
Size 120 x 55 x 60 mm
1. Tests carried out @ 20°C, 60%RH 101,325 Pa
2. GPS specifications
3. Sensor specifications
Technical Specifications
WASP WS Final. Adjusted.indd 11 12/11/18 2:49 pm

FCC FCC part 15 modular qualification FCC ID: 2AA9B05
IC I Industry Canada RSS-210 modular qualification – IC: 12208A-05
CE ETSI EN 301 489-1 V2.1.1 / EN 301 489-17 V3.1 / ETSI EN 300 328 V2.1.1
Bluetooth PENDING –RF-PHY Component
Japan Type Acceptance Number: 210-108944
New Zealand AS/NZS 4268:2012+AMDT 1:2013
Australia
Regulatory
WASP information
The information contained in this manual is for reference only.
The product described may be subject to alteration owing to the
manufacturer’s continuing research and development plans, without
making an announcement in advance. We shall not make any
statement or warranty about this manual or the contained product.
We shall not bear any legal responsibility for any direct or indirect,
accidental or special damages, losses and expenses arising from or
in connection with this manual or the contained product.
Designed and produced by
Hayes Bioelectronics Limited
Papamoa, New Zealand
www.thewaspworks.com
Learn more through
our QR code.
WASP WS Final. Adjusted.indd 12 12/11/18 2:49 pm