Wasp DR5 User manual

Hand strap hole
(only for POGO pin model)
Function Key
Power key
Package
Ensure the following contents are in the DR5 box.
If something is missing or damaged, please contact your Wasp representative.
Standard package contents:
n DR5 Term in a l
n Battery
n Hand Strap (Only for POGO pin model)
n Tray Ejector Tool
n Quick Start Guide
n Regulatory Compliance Statements
Optional accessories
n USB Type C Cable & Adapter (with US, EU, UK plugs)
(Included in the standard package)
n 1-slot Term in al & Battery Charging Cradle
n 1-slot Ethernet & Battery Cradle
n 4-slot Term in al C h argi ng Cradle
n 4-slot Ethernet Cradle
n Bumper or Extended Battery (Varies by model)
n Gun Grip
n Glass Screen Protector
Quick Start Guide
V1.0
Product View (Left/Right View)
Product View (Front/Rear View)
Flash LED
Hand strap hole
Barcode scanner window
Receiver
Background APP button
Home screen
button
Back button
Microphone
Volume
up/down
Scanner
trigger
button
Battery knobs
Pogo Pin connector
or fingerprint modules
Autofocus
camera
USB Type C
connector
Cradle Connector
NFC
LED indicator
Front camera
RUGGED MOBILE COMPUTER
DR5

Installing the Battery
1. To unlock the battery, turn up the two knobs and pull the
battery up to remove it.
1. To l o ck the battery, turn down the two knobs.
Ensure the battery is securely closed, or you may be unable
to turn on the terminal.
Using the Micro SD/Nano SIM Card
The DR5 has 1 x micro SD and 2 x nano SIM card slots inside the
battery compartment.
1. To unlock t he bat t e r y, turn up the two knobs on the side and
pull the battery cover up to remove it.
2. Insert either the tip of the tray ejector tool that came with the
package or a small bent paperclip into the eject hole.
Then pull the tray out.
3. Lock the two knobs on the battery.
Turning on the Terminal for the First Time
We recommend fully charging the DR5 before first use.
Once fully charged, start your device to set up the
languages, WiFi setting, and date/time.
•
To ensure th e unit is working properly, please keep all connectors
away from contaminants such as dust, grease, mud, and water.
Such negligence may cause the unit to lose communication, short
circuit, or overheat.
•
If the connector is damaged, ensure the connector is fully repaired
before using the unit to avoid causing the device to short circuit.
https://www.waspbarcode.com
Copyright 2020 Wasp Barcode Technologies. All rights reserved.
Checking the LED Status
LED
Description
Red Light
￭ Battery Charging
￭ Twinkling to indicate battery low
status (less than 15%)
Green Light
￭ Battery Fully charged
￭ Barcode scan good read
Blue Light
Message
All of LEDs can be controlled
by software API
If the scanner app is running, LED
control by scanner app.
No LED (Red and Green) display when battery is out (even AC IN)
Charging the Battery
If the battery has been discharged for several days, you may need
to charge it for several minutes before powering it on.
When the battery power is too low, use the power adapter or put
the device in the charging cradle to charge (strongly
recommended) and not the USB type C cable connection with your
computer. Use only the adapter, the USB type C cable and the
cradle that came from Wasp.
For additional product documentation, visit
https://www.waspbarcode.com
CAUTION!