Wasserstein Sump Pump Smart Plug User manual

Sump Pump Smart Plug
User Manual
LED indicator
High water level sensor
Mounting bracket Sync button
A. Overview
Package Includes:
∙ 1 x Sump Pump Smart Plug
∙ 1 x High Water Level Sensor
∙ 1 x User Manual
You can set up your outlet at a convenient location in your home and move it to
your sump pump later. The smart plug will remember your Wi-Fi Setup settings
so you don’t need to worry.
LIGHT INDICATOR STATE
Normal setup mode / Signal transmission Indicator ashes quickly (2 times per second)
AP Mode Indicator ashes slowly (2 seconds per ash)
Resetting Press and hold the Sync button for 5-7 seconds for
the device to reset , or switch to add status
1
Need help? Send us an email at: [email protected]

B. Manual Setup
∙ Search for our free app “Wasserstein” from the App Store or Google Play store. Or
scan QR code for installation.
∙ The Wasserstein mobile App is the central hub for your smart home devices.
Control all of your Wasserstein smart devices from one app.
∙ Ensure that your mobile device is connected to your home Wi-Fi network.
∙ Open the “Wasserstein” app and click on the Register icon at the center.
∙ Fill in your phone number or email address and follow the steps to complete the
process.
Step 1: Download the App
Step 2: Connect your mobile device to
your home Wi-Fi network
Step 3: Registration & Sign in
2
Need help? Send us an email at: [email protected]

1. Plug the Smart Outlet into any AC outlet.
2. Press the Sync button of the Smart Plug for 5-10 seconds to ensure your
indicator light is flashing red quickly.
Step 4: Plug in the Sump Pump Smart Plug.
1. After logging into the Wasserstein app, click “Add Device”.
2. Press on the socket icon and follow the on-screen instructions to connect to the
Smart Plug.
Step 5: Connect the Smart Plug to the Wasserstein App.
3
Need help? Send us an email at: [email protected]

3. Select your home’s Wi-Fi network and enter your Wi-Fi Password.
4. After a successful setup, you can rename your device.
4
Need help? Send us an email at: [email protected]

1. Check your sump pump manual for the hourly pump rate (Gallons/Hour).
2. Set up the hourly pump rate in the app.
Step 6: Set the pump volume in the Wasserstein App.
1. Mount the high water level sensor to the pipe from sump pump.
2. Set your desired water level for an alert.
Step 7: Install the High Water Level Sensor.
5
Need help? Send us an email at: [email protected]
SUMP
PUMP
DRAIN TILE
WASSERSTEIN
HIGH WATER
LEVEL SENSOR
DISCHARGE
PIPE
GATE
VALVE
AC
OUTLET
UNION/CHECK
VALVE
PIT COVER

C. Warning & Notification
∙ You may check the daily pumping cycle durationand daily amount of water being
pumped out.
∙ It is important to make sure the push notificationfunction is enabled in your
mobile device : Open your mobile device’s “Setting” page, tap “Notifications”,
enable your “Wasserstein”app’s notification.
∙ Your app will get a push notification while the high water level sensor detects a
flood.
D. Q&A
Resolving problems connecting the device with our app:
Try resetting your device by following the instructions in Section B. If the problem
persists, please try connecting the device using AP mode:
• Press the Sync button for 5 -10 seconds to ensure that your indicator light is
flashing quickly.
• Press the Sync button for another 5 -10 seconds until the light flashes slowly.
• Press “Add Device”in the Wasserstein app.
• Click “AP mode (“AP” stands for Access Point)”in the top right hand corner.
• Select your home’s Wi-Fi network & enter your Wi-Fi Password.
• Go to your Wi-Fi setting and connect to “SmartLife_XXXX” .
• Go back to the app and finish the final connection.
6
Need help? Send us an email at: [email protected]

E. General Specification
Input Voltage : AC 85-250V 50/60Hz
Max Current : 12A
Cable Length : 8Ft/2.4m
Wireless Range : 45m (Max)
Wireless Standard : IEEE 802.11 b/g/n
Wireless Frequency : 2.4GHz
Working Temperature : 0°C~40°C (32°F~104°F)
Wireless Humidity : 20%~85% Anhydrous condensation
7
Need help? Send us an email at: [email protected]
please visit our website:
www.wasserstein-home.com
For more information, please visit:
www.wasserstein-home.com
or contact us at:
[email protected]om
Made in China