Wasserstein Smart Motion Sensor User manual

Smart Motion Sensor
Package includes:
• 1xSmartMotionSensor
• 2xCR2Battery
• 1xAdhesiveTape
• 1xUserManual
• 1xScrews&WallAnchors
A. Download the App
Search“Wstein”fromtheAppStore,GooglePlay,or
simplyscanthisQRcodeforinstallation.
TheWsteinmobileappisthecentralhubforyour
smarthomeconnection.ControlallyourWasserstein
smartdevicesfromoneapp.
B. Connect your mobile device to your
home Wi-Fi network
Tondmoreproductsfromoursmarthomeuniverse,pleasevisitourwebsite:
www.wasserstein-home.com
WeoerfreeUSShippingabove$30andforyourrstpurchaseyoucanuse
discountcode:BestDeal15toget15%o.
LightIndicator
PowerButton

C. Registration & Sign in
1. Openthe“Wstein”app.Clickontheupperrightcornerto
register.
2. Typeinyourphonenumberoremailaddressandfollowthe
stepstocompletetheprocess.
D. Add new devices to your App
1. AfterloggingintotheWsteinApp,click
“AddDevice”thenselect“Sensor(Wi-Fi)”
fromthelistinmanualpairingpage.
2. Gentlypressbothsidesofthemotion
sensortoopenit.Pressthepowerbutton
for5-10secondsoruntilthelightindicator
ashesquickly.Closethesensorandlockit
backinposition.
3. Selectyourhome’sWi-Finetwork&enter
yourWi-FiPassword.
4. Aftersuccessfulsetup,youcanrename
yourdevice.
E. Hardware Installation
1. Sticktheadhesivetapeontothemountof
themotionsensor.
2. Securethemotionsensorontothewall.
Page|02
Wi-Fi:Wasserstein
PowerButton
LightIndicator
Installation with adhesive Tape
1. Rotatethemountclockwisetounlockit
andaccessthescrewholes.
2. Securethebaseofthemountontothe
wallusingthescrewsprovided.
3. Re-attachthemountcoverontothe
mountbase.
4. Mountyourmotionsensorontothewall.
Installation with screws and wall anchors

Page|03
F. Notications
1. Ifthereisamovementin yourhouse,anoticationon
yourphonewillbedisplayed.
2. Themotionsensorbluelightindicatorwillturnon.
3. Monitorthebatteryleveldirectlyfromtheapptoensure
thesmartmotionsensorwillneverrunoutofpower.
G. Q&A
1. Problem connecting the device to our app.
TryresettingyourdevicebyfollowingtheinstructionsinSectionD.Ifproblempersists,
pleasetryconnectingthedeviceusingtheAPmode:







2. If there are no notications when there is a movement.
• Pressthepowerbuttonfor5-10secondsoruntiltheindicatorlightstartsashing
quickly.
• Pressthepowerbuttonforanother5-10secondsuntilthelightashesnowslowly.
• Press“AddDevice”intheWsteinApp.
• Click“APMode”inthetoprighthandcorner.
• Selectyourhome’sWi-Finetwork&enteryourWi-FiPassword.
• GotoyourWi-Fisettingandconnectto“SmartLife_XXXX”.
• Gobacktotheappandnishthesetup.
• GotoProle>Settings>makesurethatthepushnoticationisturnedon.
• Gotoyourmobilesetting,makesurethatnoticationisallowedintheWsteinApp.
H. General Specication
• Battery    :2xCR2-3V
• OperatingVoltage   :6V
• RecommendedInstallationHeight :2m
• DetectionDistance   :5m
• HorizontalDetectionAngle  :100degree
• WiFrequency   :2.4GHz
• WiProtocol   :802.11b/g/n
• StandbyBatteryLife   :1years
Formoreinformation,pleasevisit:
www.wasserstein-home.com
orcontactusat:
[e-mail]
MadeinChina