Watchguard Firebox T80 Installation instructions

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
1/18

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
2/18
Firebox T80 Hardware Guide
WatchGuard® Firebox security appliances deliver unparalleled unified threat management, superior
performance, ease of use, and value for your small organization or branch office. Our security
subscriptions give you fully integrated protection from spyware, spam, viruses, worms, trojans, web-
based exploits, and blended threats. From firewall and VPN protection to secure remote access,
WatchGuard Firebox appliances support a broad range of network environments.
This guide introduces the Firebox T80, an RoHS-compliant (lead-free) tabletop Firebox.
Fireware OS
The Firebox T80 supports WatchGuard’s next generation OS—Fireware® OS. Each Firebox appliance
includes Fireware OS and delivers exceptional protection against today's sophisticated threats to
make sure that your business stays connected. For more information on the features of Fireware OS,
see Fireware Help.
Package Contents
Firebox T80 appliance
Quick Start Guide
1 straight-through Ethernet cable
1 120v power adapter
1 power cord (US, AU, EU, UK)
4 rubber feet
About Your Hardware
Hardware Specifications
Processor NXP LS1046A 1.2GHz
Memory: DDR4 DDR4 4 GB
Storage: SSD 128 GB
Power Supply Input Ratings: 90-264VAC, 2.22A, 47-63Hz
Output Ratings : 54VDC
Dimensions D = 205.5 mm (8.07")
W = 290 mm (11.42")
H = 43 mm(1.69")
Weight 2.6 kg (5.82 lbs)
Interface Specifications
Network
Interfaces 8 RJ45 connectors, 1000 Base-TX (10/100/1000Mbps)
Interfaces 6 and 7 support PoE (Power over Ethernet), compliant with the
IEEE 802.3at standard

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
3/18
Expansion Bay
Options
1 Single port 10Gb SFP+ Interface Module (WG9010)
LTEInterface Module (WG9015)
(Micro SIM, 2 SMA-type antenna connectors)
Antenna Gain (Peak):
0.93 dBi (617-960 MHz)
2.71 dBi (1710-2690 MHz)
3.66 dBi (3300-4200 MHz)
4.37 dBi (5150-7150 MHz)
I/O Interfaces 2 USB 2.0
1 RJ45 Serial Port
Environmental Requirements
To safely install your Firebox, we recommend that you:
Install it in indoors.
Put it in a secure area, such as a locked room, to block the device from people who do not have
permission to use it.
Connect it to a conditioned power supply to prevent damage from sudden power changes.
Other environmental requirements:
Operating temperature: 0° to 40°C (32° to 104°F)
Operating humidity: 5% to 90% non-condensing
Non-operating temperature: –40° to 70°C (-40° to 158°F)
Non-operating humidity: 5% to 90%, non-condensing
Hardware Description
Front View
Front view of the Firebox:
Failover
The Failover indicator is lit when there is a WAN failover from the primary external interface to
the backup interface. After the external interface connection fails back to the primary external
interface, the indicator is not lit.
Network Interface Status Indicators
The Firebox T80 has eight network interfaces. On the front panel, the network interfaces are
labeled 7, 6, 5, 4, 3, 2, 1, 0. There are two status indicators for each interface. The light blinks
when data is sent and received. The speed of the blink increases as the data flow increases.
Indicator Indicator Interface Status

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
4/18
1000
Yellow
On Link speed: 1000 Mbps
10/100
Green
On Link speed: 10 Mbps or 100 Mbps
A
This indicator is lit when an auxiliary interface module is installed.
Status
The Status indicator is red when there is a management connection to the device. The Status
indicator is lit for 30 seconds after you connect to the device with the Fireware Web UI or the
command line interface. It is also lit when the device is polled by WatchGuard System Manager.
Mode
The Mode indicator shows the status of the external network connection. If the device can
connect to the external network and send traffic, the indicator is green. The indicator flashes if
the device cannot send traffic to the external network.
Attn
The Attn indicator is yellow when you start the device with the Reset button pressed. For more
information, see Restore Factory-Default Settings.
Power ( )
The Power indicator is lit to indicate power status. It is green when the Firebox is powered on.
Side View
Side view of the Firebox:
The side of the Firebox has a cooling fan that runs when needed to decrease the internal
temperature of the device. By default, the fan might run for a few minutes when the Firebox boots
up. After the Firebox boots, an internal temperature sensor automatically turns the fan on and off as
needed to keep the Firebox temperature in the required operating range.At lower operating
temperatures, the T80 dissipates heat through the metal baseplate, and the fan does not run.
The fan was designed to start when the ambient room temperature reaches approximately 30°C
(86°F). However, other factors, such as stacked units, other heat sources, and air flow around the
device, can affect when the fan starts. When the ambient temperature drops to approximately
25°C(77°F), the fan stops automatically. Because some components can take some time to cool, the
fan might continue to run for a short time after the ambient temperature drops.
Indicator Indicator Interface Status

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
5/18
The fan opening includes a stationary shroud that protects the fan and prevents access to the fan
blades from outside the device.
Do not insert a pointed object to attempt to touch or move the fan blades.
For more information about fan operation and status, see Firebox T80 Fan Operation and Diagnostics
in the WatchGuard Knowledge Base .
Rear View
Rear view of the Firebox:
Reset Button
This resets the device. To restore the device to factory-default settings, see Restore Factory-
Default Settings.
Power Switch
Controls the power supplied to the device. Move the switch to position 1 to power on the
device, or position 0 to power it off.
Power Input
An AC power adapter is included with your device. Connect the AC adapter to the device and to
a power source. The power supply tip is plus (+) polarity. Use only the supplied AC power
adapter.
Built-In Interfaces
Serial Port (Console)
The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the
device.
USB Interfaces
The device includes two USB interfaces. Connect a USB storage device for USB backup and
restore, or to store a support snapshot. For more information, see Fireware Help.
Network Interfaces
The Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or
1000 Mbps. These interfaces are labeled 0/WAN, 1/LAN, 2, 3, 4, 5, 6-PoE, 7-PoE. Interfaces 6 and
7 are PoE (Power over Ethernet) interfaces, compliant with the IEEE 802.3at standard.
Interface Modules
The Firebox T80 includes an expansion bay for additional interface modules. You must install the
expansion module before you can configure the interfaces.
Expansion modules are not hot-swappable. To avoid damage to the system,
power off the Firebox before you install or remove expansion modules.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
6/18
1 Port 10Gb SFP+ Interface Module
This interface module features a 10Gb SFP+ Copper Ethernet port (WG9010).
The SFP+ port has one LED indicator above the port.
Solid Yellow Connection, no traffic
Blinks Green and Yellow Connection, traffic
You can purchase compatible SFP+ modules from an authorized WatchGuard reseller.
SFP+ multi-mode transceivers (10GBase-SR/1000Base-SX, 850 nm)
WatchGuard WG8583
Finisar FTLX8571D3BCV
Finisar FTLX8571D3BCL
Cisco SFP-10G-SR
SFP multi-mode transceivers (1000Base-SX, 850nm)
WatchGuard WG8585
Finisar FTLF8519P3BNL
Avago AFBR-5710PZ
SFP single-mode transceivers (1000Base-LX, 1310nm, up to 10km)
Finisar FTLF1318P3BTL
SFP+ single-mode transceiver (10GBase-LR-LW, 1310nm, up to 10km)
Finisar FTLX1471D3BCL
SFP+ single-mode transceiver (10GBase-ER, 1550nm, up to 80km)
Finisar FTLX1672D3BCL (40km)
Finisar FTLX1871D3BCL (80km)
SFP copper transceivers
WatchGuard WG8584
Olink OLST12R-CNS1
Fiberstore SFP-1GT-1MA-JU
LTEInterface Module
The LTE interface module (WG9015) enables you to install a SIMcard for a 4G LTE cellular connection.
You can use this cellular connection as an external interface on the Firebox for WANconnectivity.
Indicator Interface Status

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
7/18
Verizon is currently not yet supported for 4G LTE access on the T80 LTE module.
The LTEmodule comes with two external antennas. Insert the antennas in the SMA-type antenna
connectors on the module, then turn clockwise to tighten. We recommend you install the antennas at
a 45 degree angle to optimize signal strength and reduce interference.
To install the SIM card, insert a Micro or Nano SIM card into the slot on the LTE interface module
before you install the module into the Firebox.
The LTEinterface module comes with an adapter that enables you to insert a Nano
SIM card into the SIMcard slot.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
8/18
Align the direction of the SIM card and the placement of the diagonal edge based on the diagram
beside the SIM card slot.
Make sure the SIMcard is fully inserted into the slot.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
9/18
Install an Interface Module
Interface Modules are not hot-swappable. To avoid damage to the system, you
must disconnect the Firebox from the power source before you install or remove
an interface module.
To install an interface module:
1. Power off the Firebox, and disconnect the power cable.
2. Loosen the two captive screws on the expansion bay cover of the Firebox and remove the
cover.
The expansion bay contains guideposts on both sides to help you align the module.
3. Align the metal plate on the bottom of the interface module between the guideposts on both
sides.
4. Insert the interface module into the expansion bay, and push the module firmly into place.
5. Tighten the two captive screws on the interface module.
6. Reconnect the power cable to the Firebox.
7. Power on the Firebox.
When the Firebox starts, Fireware automatically detects all installed interfaces.
Remove an Interface Module

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
10/18
Before you remove an installed interface module, make sure that the interfaces
on that module are not enabled in the Firebox configuration. You cannot manage
a Firebox if an enabled interface has been removed.
To remove an installed interface module:
1. Power off the Firebox, and disconnect the power cable.
2. Loosen the two screws on the installed interface module.
3. Slide the interface module out of the expansion bay.
4. Put the removed interface module on an antistatic surface.
5. Install the expansion bay cover and tighten the two captive screws.
ACPower Adapter
The AC power adapter supplies power for the Firebox. Before you connect the adapter, verify that the
color band on the cord matches the color ring around the power plug on the Firebox.
The Firebox T80 includes a power cable to connect to the AC power adapter.
The suffix on the Firebox SKU indicates the type of power plug included with the device. Note that the
suffix is not restrictive – for instance, though tagged as “AU” for Australia, the Type I plug is also used
in China, New Zealand, and Argentina. If your country does not use one of these four plugs, use an
adapter with one of these plugs.
-US A US, Canada, Japan, Taiwan, Central America,
Some countries in South America, Philippines
-UK G United Kingdom, Ireland, Hong Kong, Singapore,
Malaysia, some African countries
-EU C Europe, Middle East, Korea, Indonesia, some
African countries
-AU I China, Australia, New Zealand
Restore Factory-Default Settings
SKUSuffix
Plug
Type Used in regions Photo

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
11/18
If you have a problem in your configuration file that you cannot correct, you can restore the factory-
default settings and start from a new configuration file. For example, if you do not know the
administrator account passphrase, or if a power interruption causes damage to the Fireware OS, you
can restore the Firebox to the factory-default settings and build your configuration again.
To reset the Firebox to factory-default settings:
1. Power off the Firebox.
2. Press and hold the Reset button on the back of the Firebox.
3. Power on the Firebox while you continue to hold the Reset button.
4. Continue to hold the Reset button until the Attn indicator on the front of the Firebox begins
to flash.
5. Release the Reset button.
6. Wait until the Attn indicator stays lit and does not flash.
7. Power off the Firebox.
8. Power on the Firebox.
The Firebox restarts with factory-default settings.
Notices
All WatchGuard products are designed and tested to meet strict safety requirements. These
requirements include product safety approvals and other global compliance standards. Please read
the following instructions carefully before operating the product, and refer to them as needed to
ensure the continued safe operation of your product.
Product Safety Certification
The WatchGuard product is safety certified under the following standards:
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1, 2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Safety Warning
Do not place objects on the power cord.
Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
Never push objects of any kind into slots or openings on this equipment. Making a contact with
a voltage point or shorting out a part may result in fire or electrical shock.
When removing or installing an appliance, follow the general installation safety instructions.
You must disconnect the AC power cord from the Firebox before you remove the cover of the
Firebox for any reason.
There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used
batteries according to the manufacturer’s instructions.
警示 本電池如果更換不正確會有爆炸的危險，請勿自行更換電池
Disclaimer
WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard
hardware appliance.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
12/18
Hinweise Zur Sicherheit
Alle WatchGuard Produkte werden entwickelt und getestet, um strenge Sicherheitsanforderungen zu
erfüllen. Diese Anforderungen umfassen Produktsicherheit Zulassungen und andere globale
Compliance-Standards. Bitte lesen Sie die folgenden Anweisungen sorgfältig, bevor Sie das Produkt,
und bezeichnen sie als notwendig, um den sicheren Betrieb des Geräts zu gewährleisten. Weitere
Informationen finden Sie in der elektronischen Hardware Guide.
Die WatchGuard Produkt ist Sicherheit unter den folgenden Normen zertifiziert
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1:2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Sicherheitshinweis
Legen Sie keine Gegenstände auf das Netzkabel.
Verdecken Sie nicht die Lüftungsöffnungen. Diese Öffnungen verhindern eine Überhitzung der
Maschine.
Stecken Sie niemals Gegenstände jeglicher Art in die Schlitze oder Öffnungen des Geräts
stecken. Der Kontakt mit einem spannungsführenden Punkt oder das Kurzschließen eines
Bauteils kann zu einem Brand oder elektrischen Schlag führen.
Beim Entfernen oder Installieren eines Gerätes, nach den allgemeinen Installation
Sicherheitshinweise.
Aviso De Seguridad
Todos los productos WatchGuard están diseñados y probados para satisfacer estrictos requisitos de
seguridad. Estos requisitos incluyen la homologación de productos de seguridad y otras normas de
cumplimiento global. Por favor, lea atentamente las siguientes instrucciones antes de utilizar el
producto, y se refieren a ellos como sea necesario para garantizar el funcionamiento seguro y
continuo de su producto. Información adicional se puede encontrar en la Guía del usuario
electrónica.
Certificación de seguridad del producto
El producto tiene certificación de seguridad WatchGuard bajo las siguientes normas:
CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10
UL 60950-1, Second Edition 2014-10-14
IEC 60950-1:2005+A1:2009+A2:2013
IEC 62368-1: 2014 2nd edition
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Advertencia de seguridad
No coloque objetos sobre el cable de alimentación.
No obstruya las aberturas de ventilación. Estas aberturas evitan el sobrecalentamiento de la
máquina.
Nunca introduzca objetos de ningún tipo en las ranuras o aberturas del equipo. El contacto con
puntos de voltaje o el cortocircuito de una pieza podría provocar un incendio o una descarga
eléctrica.
Al extraer o instalar un electrodoméstico, siga las instrucciones generales de instalación de
seguridad.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
13/18
CE Notice
The symbol on your WatchGuard Technologies equipment indicates that it is in compliance
with the Electromagnetic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the
European Union (EU).
RoHS Statement
The member states of the European Union approved directive 2002/95/EC, Restrictions of Hazardous
Substances (“RoHS directive”‘) that became valid on July 1, 2006. It states that all new electrical and
electronic equipment put on the market within the member states must not contain certain
hazardous materials. This device complies with the European Union’s R0HS directive 2002/95/EC and
similar regulations that may be adopted by other countries for European Sales.
WEEE Statement
WEEE is a general set of requirements dictated in the EU Directive 2002/96/EC. This Directive
mandated that member EU countries enact regulations governing the Waste of Electrical and
Electronic Equipment (WEEE). The Directive, and its individual transpositions into specific country laws
and legislation, is aimed at the reduction of WEEE through reuse, recovery, and recycling of WEEE.
WatchGuard is working in partnership with our European Union (EU) distribution partners to ensure
that our products are in compliance with the WEEE statutes, and that the recovery of our product per
the specific EU country legislative requirements is seamless for our product’s end users. If you have a
WatchGuard product that is at its end of life and needs to be disposed of, please contact WatchGuard
Customer Care Department at:
U.S. Customers: 877.232.3531 International Customers: +1.206.613.0456
WatchGuard is reasonably confident that our products do not contain any substances or hazardous
materials presently banned by any legislation, and do not present a risk due to hazardous materials.
WEEE recovery professionals should also note that these products do not have any materials that are
of particular high value in their individual form.
REACH
The new EU chemicals policy REACH (Registration, Evaluation, Authorization and restriction of
Chemicals) came into effect on June 1, 2007. REACH is Europe’s new chemicals legislation, which is
applicable in all 27 EU Member States as well as the EFTA European Economic Area (EEA). REACH
creates a new system for gathering information, assessing risks to human health and the
environment, and authorizing or restricting the marketing and use of chemicals produced or supplied
in the EEA. REACH has an impact on EEA producers and importers of finished products and users of
chemicals in the course of industrial or professional activities.
WatchGuard supports the overall REACH objective of improving the protection of human health and
the environment and will meet all applicable REACH requirements. WatchGuard is strongly
committed to working with our customers and supply chain to define and implement the REACH
requirements and ensure a smooth transition to compliance.
One of the REACH requirements is that manufacturers and importers have the duty to register
substances they are producing or importing. In accordance with the regulations, the products of
WatchGuard do not need to be registered for the following reasons:
WatchGuard does not import more than 1 metric ton per year of a substance as defined by
REACH.
WatchGuard products are non-chemical products that are not designed to release any
substance under normal and reasonably predictable application.
Our products do not contain the listed substances at more than 0.1% by weight of the whole
product/part.

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
14/18
Taiwan RoHS (T80)
Limited Hardware Warranty
This Limited Hardware Warranty (the “Warranty”) applies to the enclosed hardware product, not
including any associated software, which is licensed pursuant to a separate end-user license
agreement and warranty (the “Product”). BY USING THE PRODUCT, YOU (either an individual or a
single entity) AGREE TO THE TERMS HEREOF.
If you do not agree to these terms, please return this package, along with proof of purchase, to the
authorized dealer from which you purchased it for a full refund. WatchGuard Technologies, Inc.
(“WatchGuard”) and you agree as set forth below or on the reverse side of this card, as applicable.
1. LIMITED WARRANTY. WatchGuard warrants that upon delivery and for one (1) year thereafter
(the “Warranty Period”): (a) the Product will be free from material defects in materials and
workmanship, and (b) the Product, when properly installed and used for its intended
purpose and in its intended operating environment, will perform substantially in accordance

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
15/18
with WatchGuard applicable specifications.
This warranty does not apply to any Product that has been: (i) altered, repaired or modified
by any party other than WatchGuard except for the replacement or inclusion of specified
components authorized in, and performed in strict accordance with, documentation
provided by WatchGuard; or (ii) damaged or destroyed by force majeure events, accidents,
power spikes or similar events or by any intentional, reckless or negligent acts or omissions
of any party. You may have additional warranties with respect to the Product from the
manufacturers of Product components. However, you agree not to look to WatchGuard for,
and hereby release WatchGuard from any liability for, performance of, enforcement of, or
damages or other relief on account of, any such warranties or any breach thereof.
2. REMEDIES. If any Product does not comply with the WatchGuard warranties set forth in
Section 1 above, WatchGuard will, following the receipt of the product you claim is defective
and at its option, either (a) repair the Product, or (b) replace the Product with a like or similar
product; provided, that you will be responsible for returning the Product and for all costs of
shipping and handling. Repair or replacement of the Product shall not extend the Warranty
Period. Any Product, component, part or other item replaced by WatchGuard becomes the
property of WatchGuard. WatchGuard shall not be responsible for return of or damage to
any software, firmware, information or data contained in, stored on, or integrated with any
returned Products.
3. DISCLAIMER AND RELEASE. THE WARRANTIES, OBLIGATIONS AND LIABILITIES OF
WATCHGUARD, AND YOUR REMEDIES, SET FORTH IN PARAGRAPHS 1 AND 2 ABOVE ARE
EXCLUSIVE AND IN SUBSTITUTION FOR, AND YOU HEREBY WAIVE, DISCLAIM AND RELEASE
ANY AND ALL OTHER WARRANTIES, OBLIGATIONS AND LIABILITIES OF WATCHGUARD AND
ALL OTHER RIGHTS, CLAIMS AND REMEDIES YOU MAY HAVE AGAINST WATCHGUARD,
EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH RESPECT TO ANY
NONCONFORMANCE OR DEFECT IN THE PRODUCT (INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANY
IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING, OR
USAGE OF TRADE, ANY WARRANTY O NONINFRINGEMENT, ANY WARRANTY OF
UNINTERRUPTED OR ERROR-FREE OPERATION, ANY OBLIGATION, LIABILITY, RIGHT, CLAIM
OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE NEGLIGENCE (WHETHER
ACTIVE, PASSIVE OR IMPUTED) OR FAULT OF WATCHGUARD OR FROM PRODUCT LIABILITY,
STRICT LIABILITY OR OTHER THEORY, AND ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR
REMEDY FOR LOSS OR DAMAGE TO, OR CAUSED BY OR CONTRIBUTED TO BY, THE
PRODUCT).
4. LIMITATION AND LIABILITY. WATCHGUARD’S LIABILITY (WHETHER ARISING IN CONTRACT
(INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND
STRICT LIABILITY AND FAULT) OR OTHER THEORY) WITH REGARD TO ANY PRODUCT WILL IN
NO EVENT EXCEED THE PURCHASE PRICE PAID BY YOU FOR SUCH PRODUCT. THIS SHALL BE
TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY. IN NO EVENT WILL
WATCHGUARD BE LIABLE TO YOU OR ANY THIRD PARTY (WHETHER ARISING IN CONTRACT
(INCLUDING WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE OR IMPUTED NEGLIGENCE AND
STRICT LIABILITY AND FAULT) OR OTHER THEORY) FOR COST OF COVER OR FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT
LIMITATION LOSS OF PROFITS, BUSINESS, OR DATA) ARISING OUT OF OR IN CONNECTION
WITH THIS WARRANTY OR THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF
WATCHGUARD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS SHALL BE
TRUE EVEN IN THE EVENT OF THE FAILURE OF ANY AGREED REMEDY.
5. MISCELLANEOUS PROVISIONS. This Warranty will be governed by the laws of the state of
Washington, U.S.A., without reference to its choice of law rules. The provisions of the 1980
United Nations Convention on Contracts for the International Sales of Goods, as amended,
shall not apply. You agree not to directly or indirectly transfer the Product or use of the
product or associated documentation to any country to which such transfer would be
prohibited by the U.S. Export laws and regulations. If any provision of this Warranty is found
to be invalid or unenforceable, then the remainder shall have full force and effect and the
invalid provision shall be modified or partially enforced to the maximum extent permitted by
law to effectuate the purpose of this Warranty. This is the entire agreement between
WatchGuard and you relating to the Product, and supersedes any prior purchase order,

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
16/18
communications, advertising or representations concerning the Product AND BY USING THE
PRODUCT YOU AGREE TO THESE TERMS. IF THE PRODUCT IS BEING USED BY AN ENTITY, THE
INDIVIDUAL INDICATING AGREEMENT TO THESE TERMS BY USING THE PRODUCT
REPRESENTS AND WARRANTS THAT (A) SUCH INDIVIDUAL IS DULY AUTHORIZED TO ACCEPT
THE WARRANTY ON BEHALF OF THE ENTITY AND TO BIND THE ENTITY TO THE TERMS OF
THIS WARRANTY; (B) THE ENTITY HAS THE FULL POWER, CORPORATE OR OTHERWISE, TO
ENTER INTO THE WARRANTY AND PERFORM ITS OBLIGATIONS UNDER THE WARRANTY AND;
(C) THE WARRANTY AND THE PERFORMANCE OF THE ENTITY’S OBLIGATIONS UNDER THE
WARRANTY DO NOT VIOLATE ANY THIRD-PARTY AGREEMENT TO WHICH THE ENTITY IS A
PARTY.
No change or modification of the Warranty will be valid unless it is in writing and is signed by
WatchGuard.
Declaration of Conformity

01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
17/18
Give Us Feedback ●  Get Support ●  All Product Documentation ●  Technical Search
© 2022 WatchGuard Technologies, Inc. All rights reserved. WatchGuard and the WatchGuard logo are registered
trademarks or trademarks of WatchGuard Technologies in the United States and other countries. Various other
trademarks are held by their respective owners.


01.11.22, 14:00
Firebox T80 Hardware Guide
https://www.watchguard.com/help/docs/help-center/en-US/Content/en-US/Hardware-Guides/firebox-t80-hardware-guide.html?cshid=10002
18/18