WATCHMARK Active User manual

USER MANUAL
WWW.WATCHMARK.COM

Music control
Find a phone
Take photos
Sleep monitor
Sports modes
Stopwatch
Alarm
Timer
Weather
Changing the dial theme
Reset to default settings
Settings
Time, date
Pedometer
Brightness adjustment
Distance travelled
Blood pressure
Heart rate
Calorie counter
11
12
13
14
15
TABLE OF CONTENTS
Introduction Applications and functions
About the watch 4
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear
a smartwatch?
7
Belt change 8
5
6
Belt length adjustment
Installing the app 9
Smartwatch functions 10

Technical data 20
Product complaint
Product return
21
Product replacement
22
Functions available
in the application 16
Measurement history
Sports modes
Movement reminder
Alarm clock
Notifications
Activity alarm
High heart rate alarm
G-Sensor
Battery saving mode
Blood pressure monitor
calibration
Auto shut-off screen
Female cycle monitoring
Changing the dial
Reset to factory settings
17
18
19
23
TABLE OF CONTENTS
General Information Applications and functions

About Watchmark Active
The fashionable design of the smartwatch allows every woman's
individual style to be highlighted. The watch not only catches the
eye, but also motivates you to take care of your health. Change
the design of the dial or wear a new strap for a more elegant or
sporty look. The smartwatch will help improve your form by
tracking your workout progress and recording it in the app. The
watch's menu is in English.
Device configuration
Contents of the package
Smartwatch (colour and
material may vary depending on
the colour chosen)
Belt (colour and material may
vary depending on the colour
chosen)
Charger (colour and material
may vary depending on the
model selected)
4
Introduction

iOS 9.0 and above
Android 4.4 and later
Bluetooth supported: 4.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging contacts of the device. Once connected, charging will
start automatically and the charging icon will appear on the
screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 4.4+ IOS 9.0+
5

Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the device.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
6
Additional information

How to wear a smartwatch?
The strap for this watch model is 15mm wide. It is
interchangeable and additional straps can be purchased in
a different colour or material.
Wearing the watch
When you're not exercising, wear the smartwatch as you
would a regular watch, i.e. one finger above your wrist bone.
To take full advantage of the heart rate monitoring function
during exercise, try wearing the device above your wrist
(2 fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement
is important.
7

Belt length adjustment
Unscrew the sharp end of the device so that the bracelet
strap is placed on the sponge.
Press the sharp end against the hole where the rivet is
located in the bracelet to detach the segment.
For best visual effect, detach the segments
symmetrically from both sides of the bracelet.
1.
2.
3.
Belt change
Insert one end of the strap together with the telescope
into the recess of the watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach it to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take careful care and watch out
for your fingernails when attaching the telescopes to the
watch.
1.
2.
Wearing the belt
Removing the belt
With one hand, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.

Once the app is installed, turn on Bluetooth on your phone and go
to the app. Create an account or log in anonymously. Allow
access. Then click on 'Scan hardware'. Select AK38. Once
connected, you can choose which apps you want to receive
notifications from. The app will then ask you to grant it access to
notifications. Select the "H Band" application from the menu. For
the app to work properly, you need all the consents it asks for.
The app for the Active smartwatch model is "H Band".
Download the app from the Google Play / App Store or via
the QR code below. The app is in the English language.
9
Google Play App Store
Applications and functions
Installing applications

Features available on the Smartwatch
Time, date
Pedometer
Screen backlight brightness adjustment
Distance travelled
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or in the first tab to the left of the main screen.
Adjusting the brightness helps to protect your eyes from a
screen that is too bright at night, to adapt the backlight to the
outdoor situation and to save the watch's battery. You can find
this function in the drop-down menu from the main screen and
select the appropriate display brightness.
Information about the distance covered during the day. The
distance travelled can be found in the first tab to the left of the
home screen.
10

Blood pressure (BP)*
Heart rate*
Calorie counter
Blood pressure is the force with which the blood pushes against
the arterial walls during systole and diastole of the heart muscle.
The accepted norm for systolic blood pressure is 120 mm Hg,
while for diastolic blood pressure it is 80 mm Hg. On the watch,
the function for measuring blood pressure can be found in the first
tab to the right of the home screen or in the menu by pressing the
side button.
Heart rate, or pulse: this is the number of beats of the heart
muscle per 1 minute. The accepted norm is a limit between 60 and
100 beats per minute. When the pulse is elevated we speak of
tachycardia, while when it is reduced we speak of bradycardia.
Both conditions can be dangerous to our health. In the watch, the
function for measuring heart rate can be found in the 2nd tab to
the right of the main screen or in the menu by pressing the side
button.
Calculates the number of calories burnt in a given day. The data
on calories burnt can be found in the first tab on the left of the
home screen.
*Do not make health decisions based solely on smartwatch results. For measurements to be accurate, users should measure
health functions at rest as they would with traditional medical devices and refrain from measuring during exercise, smoking or
alcohol consumption. The smartwatch is not a medical device and the measurement results are for reference only.
Features available on the Smartwatch

Music control
Find your phone
Taking photos
Once the watch is connected to your phone via the app and
music is turned on on your phone, you can pause and resume
music, as well as rewind and rewind songs. To control music,
turn it on on your phone and then go to the music function by
pressing the side button.
On the smartwatch, selecting the 'Find Phone' function will
trigger a beep and vibration on your phone to help you find your
phone quickly and easily. The function is active when the watch
is connected to your phone. You will find it in the menu after
pressing the side button.
The smartwatch can be used as a remote camera shutter. To
take a photo remotely, select the "Camera" function from the
menu and then on your phone allow the permissions the app
asks for. The camera on your phone will start up. To take a
photo, shake your wrist.
12
Features available on the Smartwatch

Sleep monitor
Sports modes
Stopwatch
A function that helps to analyse a person's sleep. The watch
shows the number of hours slept and the phases of sleep, in
which we distinguish between shallow and deep sleep. You will
find the sleep data in the second tab to the left of the home
screen.
The watch's 10 sports modes allow you to control your training
goals by monitoring steps, heart rate, calories and distance.
Workout data can be found in the app after synchronisation.
Available sports modes: outdoor run, indoor run, outdoor walk,
indoor walk, hike, stair stepper, bike, stationary bike, orbiter,
rowing machine. On the watch, the sports modes function can
be found in the menu after pressing the side button.
A function that is used to check and measure short distances of
time. On the watch, the stopwatch function can be found in the
menu by pressing the side button.
13
Features available on the Smartwatch

Alarm
Timer
Weather
Changing the dial theme
To see the alarms you have set, go to the menu by pressing
the side button. To set an alarm clock go to the app. See page
16 for more.
The timer allows you to count down time. On the watch, the
timer function can be found in the menu by pressing the side
button.
The watch, when connected to the app, will indicate the
temperature for the day. On the watch, the weather function
can be found in the menu after pressing the side button.
There are several dials to choose from on the watch. To
change the dials, press the main screen for a long time (about
3 seconds). In the app, you can download more dials or set
your own image. See page 19 for more.
14
Features available on the Smartwatch

Reset to factory settings
Settings
Resetting to factory settings allows you to reset the watch and
erase all data and settings. On the watch, the reset function is
located in the settings in the menu after pressing the side
button.
In the settings you can:
-select from which apps you want to receive notifications on the
watch,
-adjust the screen brightness,
-adjust the screen backlight time (up to a maximum of 30
seconds).
And also enable:
-motion reminder (Sedentary mode)
-automatic monitoring of health functions (pulse, blood
pressure). Setting automatic measurements reduces battery
life.
-setting the pulse alarm (you set the upper pulse limit in the
app, more on page 17)
-lighting of the screen by hand movement
15
Features available on the Smartwatch

Functions available in a dedicated application
Measurement history
Sports modes
Movement reminder
Alarm clock
In the app, you will find the history of the measurements taken
by the watch. To check your history, select "Desktop" in the
app.
In the app you can use the sports modes and have a preview
on your phone of the route taken, pace, calories burned and
duration of activity. You can select a sports mode with GPS or
choose from the available sports modes. When the activity is
over, the map in the app will show the route covered. You can
share or upload your results.
In the app, you can set cyclical reminders every 30-240
minutes, whereby the watch, when it detects that a person
remains motionless for an extended period of time, reminds you
to perform an activity. The mode can be set at specific times.
To enable this function, in the app select "Profile", then "AK38"
and select "Activity Alert".
To set an alarm on the watch, select the alarm time and time in
the app. To do this, in the app select "Profile", then "AK38" and
select "Alarm clock".
16

Notifications
Alert to inform you if your heart rate is too high
Auto-disable screen
The app notification function allows you to read the beginning
of a message on the smartwatch screen. Notifications can
come from apps such as QQ, WeChat, LinkedIn, Skype,
Facebook, WhatsApp, Instagram and Gmail. To enable this
feature, go to 'Profile', then 'AK38' and 'Notifications'.
When the watch detects irregularities related to your heart rate
during measurements, it will notify you. To enable this function,
go to "Profile" in the app, then "AK38" and select "Heart rate
alert". Set from which BPM level the watch should notify you of
irregularities.
To set the backlighting time of the screen, go to "Profile" in the
app, then "AK38" and select "Auto screen off".
17
Functions available in a dedicated application

Screen wake-up with a flick of the wrist (G-Sensor)
Battery saving mode
Blood pressure monitor calibration
To enable the watch screen wake-up with a flick of the wrist,
select "Profile" in the app, then "AK38" and "Screen wake-up
gesture".
This mode allows the watch to run for longer. To activate the
power saving mode, go to "Profile" in the app, then "AK38" and
select "Low power consumption mode".
The smartwatch has the ability to calibrate the watch's blood
pressure monitor. Calibration aims to provide more accurate
measurements. To calibrate your blood pressure monitor, go to
"Profile" in the app, then "AK38" and select "Personalise blood
pressure". Enter the result from your medical blood pressure
monitor.
18
Functions available in a dedicated application

19
Female cycle monitoring
Changing the dial
Resetting to factory settings
To activate this function, the user's gender must be set in the
app. A message will appear to activate the female cycle
function. In the app, there are 4 options to choose from:
menstrual cycle, ovulation, pregnancy and maternity. Once
entered into the app, the smartwatch records menstrual cycles
and reminds you when the next one arrives. The expected date
of childbirth can also be set. To set parameters, go to 'Profile'
in the app, then click on your profile at the top and select the
pink icon.
Many other dial themes are available in the dedicated app. To
select dials, go to 'Profile' in the app, then 'AK38' and select
'Dial Settings'. To download dials, select "More watch dials".
Data/Wifi transmission must be enabled.
Resetting to factory settings allows you to reset the watch and
erase all data and settings. To reset the device and the app, go
to "Profile" in the app, then "AK38" and select "Factory reset".
Functions available in a dedicated application

IP67** water resistance
Allows you to use the watch
while washing your hands or
on a rainy day.
160mAh battery
The large battery capacity
allows long use of the
smartwatch.
Classic design
Due to its classic design, the
watch goes with any style.
GR5515I0ND processor
High performance and
precision measurements.
**The IP67 standard allows a water temperature of +10 to +35 degrees Celsius and immersion to a depth of 1m for up to 30min. The watch
cannot be used in hot baths or saunas as it is not steam resistant. It is not designed for swimming, it has been designed to help look after
your health.
General Information
Specifications