WATCHMARK WM18 User manual

OPERATING INSTRUCTIONS
WWW.WATCHMARK.COM

TABLE OF CONTENTS
Introduction
About the watch 4
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear the WM18 7
Changing the band 8
App and functions
Installing applications 9
What you can do
on your smartwatch 10
Heart rate
Body temperature
ECG
Respiratory rate
Sleep monitor
Notifications/messagesStop
watch
Stoper
Instrument control
Weather
Sports modes
Reset to factory settings
Time, date
Pedometer
Brightness control
Calorie counter
Distance
Blood pressure
Saturation
11
5
6
12
13
14
15
APPLICATIONS AND FUNCTIONS
Apps and functions

TABLE OF CONTENTS
Technical data
General Information
19
20
Product complaints
Product return 21
Product exchange 23
Features available within
the app 16
Blood pressure monitor
calibration
Automatic heart rate
detection
Notifications
Alarm clock
Do not disturb" mode No
motion
Care function
Find phone
ECG measurement
Alarm settings
17
18
19
Apps and Features

Introduction
About the WM18 watch
The WM18 smartwatch is a premium model that has been
designed with your health in mind. The device has features such
as a heart rate monitor, blood pressure monitor, pulse oximeter,
thermometer, ECG measurement and sleep monitor. It has the
latest generation Texas Instruments AFE Ti4404 chip built in for
accurate pressure measurement, sports modes and the ability to
display notifications from social apps.
Device configuration
Packaging content
Smartwatch (colour and
material may vary depending on
the colour chosen)
Smartwatch strap (colour and
material may vary depending
on the colour selected)
Charger (colour and material may vary
depending on the model selected)
4

iOS 8.2 and above
Android 4.4 and later
Bluetooth supported: 4.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging pins of the device. Once connected, charging will start
automatically and the charging icon will appear on the screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 4.4+ IOS 8.2+
5

Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the equipment.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
6
Additional information

How to wear the WM18?
The band for this watch model is 22mm wide. It is
interchangeable and additional straps in a different colour or
material can be purchased for it.
Wearing the watch
When you are not exercising, wear the WM18 like a normal
watch, i.e. one finger above your wrist bone.
To get the most out of the heart rate monitoring function
during exercise, try wearing the device above your wrist (2
fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement is
important.
7

Replacing the strap
Insert one end of the strap with the telescope into the
cavity of the WM18 Plus watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take great care and be careful
with your fingernails when attaching the telescopic straps to
the watch.
1.
2.
Attaching the strap
Removing the strap
On one side, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.
8

Apps and Features
Installing applications
The app for the WM18 Plus smartwatch model is
"SmartHealth". Download the app from the Google Play / App
Store or via the QR code below.
Once the app is installed, turn on Bluetooth on your phone and
navigate to the app. For the app to work properly, you will need to
give all the consents the app asks for. Fill in your personal details
- go to "Settings" in the bottom right corner, then select the icon
with your email address. To connect the watch, in the bottom
corner click:
"Settings" and then "Device status". Your phone will search for
Bluetooth devices and you should select the appropriate model
(M18 Plus).
9

Functions available on the Smartwatch
Time, date, day of the week
Pedometer
3 steps adjustment of the screen backlight brightness
Calorie counter*
Distance travelled
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or on the main screen of the watch.
The 3-step brightness adjustment helps protect your eyes from
an overly bright screen at night and saves the watch's battery.
You can find this function in the settings of the smartwatch and
select the appropriate brightness of the display.
Calculates the number of calories burned in a given day. The
data on calories burned can be found on the home screen in
the watch and app.
Information on how much distance was covered during the day.
The distance travelled can be found in the first tab to the right
of the home screen. The number of steps walked and calories
burned can also be found in this tab.
10

Features available on the Smartwatch
Blood pressure*
Saturation*
Blood pressure is the force with which the blood pushes against
the walls of the arteries during the contraction and diastole of the
heart muscle. The accepted standard for systolic blood pressure is
120 mm Hg, while for diastolic blood pressure it is 80 mm Hg.
The smartwatch has the ability to calibrate the blood pressure
monitor built into the smartwatch via a medical blood pressure
monitor app. The calibration aims to provide more accurate blood
pressure monitor measurements.
After installing the dedicated app, go to the homepage and then
search for the "PRESSURE" function. Once in the function, press
the "CALIBRATION" button and enter the measurement result from
a classic blood pressure monitor.
On the watch, the function for measuring blood pressure is located
in the 5th tab, to the right of the main screen.
This function indicates the oxygenation level of the blood. As a
norm, the result should be between 95 and 100%. When the
oxygenation level drops, it can be dangerous for our health.
On the watch, the function for measuring blood oxygenation is
located in the 6th tab to the right of the home screen.
11

Functions available on the Smartwatch
Heart rate*
Body temperature*
ECG*
Heart rate, or pulse: this is the number of beats of the heart
muscle per minute. The accepted norm is a limit between 60
and 100 beats per minute. When the pulse is elevated we
speak of tachycardia, while when it is reduced we speak of
bradycardia. Both conditions can be dangerous to our health.
On the watch, the heart rate function is located in the 3rd tab on
the right of the home screen.
This function allows you to measure your current body
temperature. The normal body temperature for an adult is
considered to be 36.6 degrees Celsius. When the temperature
level rises to 38 degrees we speak of a fever.
On the watch, the temperature measurement function is located
on the 2nd tab to the right of the home screen.
The electrocardiogram measures the electrical activity of the
heart. It allows the detection of many cardiovascular diseases.
During the measurement, hold the metal plate on the side of
the watch. The watch's electrodes must be completely against
the skin.
On the watch, the function for measuring the ECG is located in
the 4th tab to the right of the home screen.
12

Functions available on the Smartwatch
Respiratory rate*
Sleep monitor*
Notifications / messages
The number of breaths per minute is called the respiratory rate
(RR). A normal calm breathing rate in an adult is 12-20 breaths
per minute.
On the watch, the function for measuring respiratory rate is
located in the 7th tab to the right of the home screen.
A function that helps analyse a person's sleep. The watch
shows the number of hours you have slept and the phases of
sleep, which distinguish between shallow and deep sleep.
On the watch, the function for sleep monitoring is in the 9th
position at the bottom of the function selection.
Once the watch has been connected to the phone via the app
and the appropriate permissions have been granted, incoming
notifications of messages and from social networks will be
displayed on the watch.
13

Functions available on the Smartwatch
Stopwatch
Phone camera control
Weather
Sports modes
A function that is used to check and measure short intervals of
time.
In the watch, the stopwatch function is located in the 10
position at the bottom of the function selection.
This function allows you to remotely take photos with your
phone's camera by activating your phone's camera shutter
button via the smartwatch.
On the watch, the camera control function is in the 11th position
at the bottom of the function selection.
An additional function that is currently being tested. Weather
may indicate an incorrect location.
The watch's 7 sports modes allow you to control your training
goals by monitoring time, pace, calories burned and pulse
during your workout, among other things.
Workout data can be found in the app after synchronisation.
Available sports modes: running, cycling, fitness, badminton,
pingpong, basketball, skipping. On the watch, the sports modes
are located to the left of the main screen.
14

Features available on the Smartwatch
Reset to factory settings
Reset to factory settings allows you to select different types of
settings and reset them later to factory settings.
On the watch, the reset to factory settings function is located at
position 3 in the main settings.
15

Functions available in the dedicated app
Blood pressure monitor calibration
Automatic heart rate detection
The smartwatch has the ability to calibrate the blood pressure
monitor built into the smartwatch via the medical blood
pressure monitor app. The calibration aims to provide more
accurate blood pressure monitor measurements.
After installing the dedicated app, go to the home page and
then search for the "PRESSURE" function. Once in the
function, press the "CALIBRATION" button and enter the
measurement result from a classic blood pressure monitor.
In the app, it is possible to take heart rate measurements on
demand and to set the measurements to be taken in a cyclic
manner.
Cyclic measurement can be switched on or off in the app and
automatic measurements can be set to take place every 10-60
minutes. The automatic measurement is performed without our
intervention.
The heart rate measurement helps us to determine the intensity
of our workout, to detect differences in our heart rate in
stressful situations and at rest.
Setting up automatic measurements reduces battery life.
16

Functions available in the dedicated app
Incoming call notifications
Social app notifications
Alarm clock
"Do Not Disturb" mode
No motion
Notifications of an incoming call with the name of a contact
from your smartphone's phonebook.
The app notification function allows you to read a message on
the smartwatch screen. Notifications can come from apps such
as QQ, WeChat, LinkedIn, Skype, Facebook, Twitter,
WhatsApp, Viber, Line and others.
An alarm clock can be set in the app to help you wake up on
time.
This mode will be useful during situations and meetings where
notifications should not distract you. While it is running, you will
not be shown notifications for messages and from the app.
No movement This function signals us when we have not been
active for a long time. It reminds us and encourages us to start
being active.
17

Functions available in the dedicated app
Care function
Find phone
ECG measurement
In the watch owner's app, a 'friend' needs to be added via
account name/e-mail. Once correctly added, he or she can
check what measurements the watch wearer has.
On the smartwatch, selecting the 'Find Phone' function will
trigger a beep on the phone to help you find your phone quickly
and easily.
The app allows us to measure the ECG, i.e. check the normal
heart rate. Thanks to this measurement, we can detect
deviations from the norm, which can alert us to health
problems. In the application we have the possibility to call up an
ECG measurement. To take the measurement correctly, you
need to
fasten the smartwatch strap tightly to the wrist. The metal plate
on the inside of the envelope must be pressed against the skin,
at the same time the button on the right side of the envelope
must be pressed. During the measurement, do not move,
remain calm and await the end of the measurement.
*Do not make health decisions based on smartwatch results alone. For accurate measurements, users should measure health
functions at rest, as with traditional medical devices, and refrain from measuring during exercise, smoking or alcohol consumption. The
smartwatch is not a medical device and measurement results are for illustrative purposes only.

Functions available in the dedicated app
Fever alarm settings
Setting an alarm for too high a heart rate
steps taken
calories burnt
distance travelled
length of sleep
heart rate measurement
blood pressure
blood oxygenation
body temperature
respiratory rate
activity
Two alarms can be set in the app:
In the app we have the possibility to set a notification when the
body temperature reaches 38℃ (temperature set
automatically). You can change the temperature in the
notification from 37℃ or higher.
Alarms are set to notify you when your heart rate is too high.
You can set the heart rate you want the app to inform you
about. The heart rate that is automatically set when the alarm is
activated is 150 beats per minute.
In the app, you will find available measurement histories:
19

General information
Technical data
Waterproof to IP67**
Allows you to use the watch
while washing your hands or
on a rainy day.
240mAh battery
Large battery capacity allows
you to use the smartwatch for
long periods of time.
Design Classic
Thanks to the classic design,
the watch fits into any styling.
Processor by Texas
Instruments and
OSRAM***.
High precision monitoring of
health functions.
**The IP67 standard allows a water temperature of +10 to +35 degrees Celsius and immersion to a depth of 1m for up to 30min. The watch cannot be used in hot
baths or saunas as it is not steam resistant. It is not designed for swimming, it has been designed to help look after your health.
***The smartwatch has Ti AFE4404 + 2*OSRAM 2703 + OSRAM LED sensors to measure blood oxygenation, the Ti 129X chip is responsible for measuring ECG,
and Ti AFE4404 + 2*OSRAM 2703 for measuring PPG.