WATCHMARK WL15 User manual

WWW.WATCHMARK.COM
USER MANUAL

4
7
8
Time, date
Pedometer
Calorie counter
Distance
Screen brightness
adjustment
Blood pressure
Saturation
ECG
Pulse
Find phone function
Stopwatch
Timer
Sleep monitor
Notification/message
Music control
Sports modes
Change of dial theme
Weather
Torch
Device reset
Settings
11
5
6
12
13
14
15
TABLE OF CONTENTS
Introduction
About the watch
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear
a smartwatch?
Belt change
Applications and functions
Installing the app 9
Smartwatch functions 10

19
20
21
16
Measurement history
Notifications
Change of dial theme
ECG
Phone camera control
Find device" function
Alarm clock
Reminder to move
Hydration reminder
G-Sensor
Automatic heart rate
monitoring
17
21
18
TABLE OF CONTENTS
General Information Applications and functions
App functions Specifications
Product complaint
Product return
Product exchange

The Watchmark WL15 is a state-of-the-art smartwatch with many
health and sports functions. The smartwatch counts steps, calories
burned, shows distance travelled, monitors sleep and has several
sports modes. The watch's menu is in English.
Device configuration
Contents of the package
4
Introduction
About Watchmark WL15
Smartwatch (colour and
material may vary depending on
the colour chosen)
Strap (colour and material
may vary depending on the
colour chosen)
Charger (colour and material
may vary depending on the
model selected)

iOS 8.0 and above
Android 4.4 and later
Bluetooth supported: 4.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging contacts of the device. Once connected, charging will
start automatically and the charging icon will appear on the
screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 4.4+ IOS 8.0+
5

6
Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the device.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
Additional information

7
How to wear a smartwatch?
The strap for this watch model is 22 mm wide. It is
interchangeable and additional straps can be purchased in
a different colour or material.
Wearing the watch
When you're not exercising, wear the smartwatch as you
would a regular watch, i.e. one finger above your wrist bone.
To take full advantage of the heart rate monitoring function
during exercise, try wearing the device above your wrist
(2 fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement
is important.

8
Belt change
Insert one end of the strap together with the telescope
into the recess of the watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach it to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take careful care and watch out
for your fingernails when attaching the telescopes to the
watch.
1.
2.
Wearing the belt
Removing the belt
With one hand, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.

The app for the WL15 smartwatch model is "FitCloudPro".
Download the app from the Google Play / App Store or via
the QR code below. The app is in English.
Once the app is installed, turn on Bluetooth on your phone and go
to the app. Create an account or continue without registering. Fill
in your data and allow access. For the app to work properly, you
need to give all the consents it asks for. To connect your watch,
select "Scanning" and then the watch model (L15).
Google Play App Store
9
Applications and functions
Installing applications

Functions available on the Smartwatch
Time, date, day of the week
Pedometer
Calorie counter
Distance travelled
Adjusting the brightness of the screen backlight
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or in the first tab to the right of the main screen.
Calculates the number of calories burned on a given day. The
data on calories burned can be found in the first tab to the right
of the home screen in the app.
Information on how much distance was covered during the day.
Distance travelled can be found in the first tab to the right of the
home screen.
Adjusting the brightness helps protect your eyes from a screen
that is too bright at night and saves the watch battery. You can
find this function in the drop-down menu from the main screen.
10

Blood pressure (BP)*
Oxygen saturation (SPO2)*
ECG*
Blood pressure is the force with which the blood pushes against
the arterial walls during systole and diastole of the heart muscle.
The accepted norm for systolic blood pressure is 120 mm Hg,
while for diastolic blood pressure it is 80 mm Hg. On the watch, the
function for measuring blood pressure is located in the third tab to
the right of the main screen under the name BP.
This function indicates the oxygenation level of the blood. As a
norm, the result should be between 95 and 100%. When the
oxygenation level drops, it can be dangerous for our health. On the
watch, the function for measuring blood pressure is located in the
third tab to the right of the home screen under the name "Blood
oxygen".
The electrocardiogram examines the electrical activity of the heart.
It allows the detection of many cardiovascular diseases. The
watch's electrodes must fit completely against the skin. On the
watch, the function for measuring blood pressure is located in the
third tab to the right of the home screen under the name ECG. You
will see the result in the app.
*Do not make health decisions based solely on smartwatch results. For measurements to be accurate, users should measure
health functions at rest as they would with traditional medical devices and refrain from measuring during exercise, smoking or
alcohol consumption. The smartwatch is not a medical device and the measurement results are for illustrative purposes only.
Functions available on the Smartwatch

Pulse rate (HR)*
Find phone function
Stopwatch
Heart rate, or pulse: is the number of beats of the heart muscle
per 1 minute. The accepted norm is between 60 and 100 beats
per minute. When the pulse is elevated we speak of
tachycardia, while when it is reduced we speak of bradycardia.
Both conditions can be dangerous to our health. On the watch,
the function for measuring blood pressure is located in the third
tab to the right of the home screen under the name "Pulse".
Once the device has been correctly paired with the app on your
phone, you will be able to quickly find your phone. When you
select "Find phone", your phone will start vibrating and ringing.
On the watch, this function can be found in the menu to the left
of the home screen.
A function that is used to check and measure short intervals of
time. On the watch, you will find this function in the menu to the
left of the home screen.
*Do not make health decisions based solely on smartwatch results. For measurements to be accurate, users should measure
health functions at rest as they would with traditional medical devices and refrain from measuring during exercise, smoking or
alcohol consumption. The smartwatch is not a medical device and the measurement results are for illustrative purposes only.
Functions available on the Smartwatch

Timer
Sleep monitor
Notifications / messages
Music control
The timer allows you to count down time. On the watch, the
timer function is located in the menu to the left of the home
screen.
A function which helps to analyse a person's sleep. The watch
shows the number of hours slept and the phases of sleep, in
which we distinguish between shallow and deep sleep. On the
watch, the function for sleep monitoring is located in the second
tab to the right of the home screen.
Once the watch has been connected to the phone via the app
and bluetooth and the relevant permissions have been granted,
incoming notifications of messages and from social networks will
be displayed on the watch. For notifications to display, you must
enable this feature in the app settings. See page 16 for more.
When you connect your watch to your phone via the app and
turn on music on your phone, you can pause and resume music,
as well as rewind and rewind songs. To control music, turn it on
on your phone and then go to the music function. On the watch,
this function is located in the Friday tab to the right of the home
screen.
Functions available on the Smartwatch

Sports modes
Changing the dial theme
Weather
The watch's 10 sports modes allow you to control your training
goals by monitoring steps, heart rate, calories and distance.
Workout data can be found in the app after synchronisation.
Available sports modes: running, walking, cycling, climbing,
table tennis, basketball, skipping, swimming, yoga. The sports
mode measures parameters such as time, calories burned and
heart rate. On the watch, the sports functions are located in the
fourth tab to the right of the home screen.
There are several dials to choose from on the watch. To
change dials, long press the main screen (about 3 seconds).
You can download more dials in the app. See page 16 for
more.
The watch, when connected to the app, will indicate the
temperature for the day. On the watch, the weather function is
in the menu when you press the side button.
14
Functions available on the Smartwatch

Torch function
Reset to factory settings
Settings
The smartwatch has a torch built into the screen. To activate it,
press the bottom button on the side of the watch envelope. To
switch off the torch, repeat the operation.
Resetting to factory settings allows you to reset the watch and
erase all data and settings. On the watch, the reset function is
located in the settings menu to the right of the home screen.
In the settings you can:
-set the screen backlight time
-set the response time of the G-sensor function
-set the vibration intensity
-set the watch language
15
Functions available on the Smartwatch

Functions available in a dedicated application
Measurement history
Notifications
Changing the dial theme
ECG*
In the app you will find the history of the measurements taken
by the watch. To check the history, select "Home" in the app.
The notification function allows you to read the beginning of a
message on the smartwatch screen. Notifications can come
from apps such as: Facebook, Instagram, Skype and
Messenger. To enable this function, go to "Device" and then
select "Notification settings".
Other dial themes are available in the dedicated app. To select
dials, go to 'Device' in the app and then 'Watch dial selection'.
To download dials, data/Wifi transmission must be enabled on
the phone.
To see the result of an ECG performed by the watch, go to
"Devices" and then "ECG".
*Do not make health decisions based solely on smartwatch results. For measurements to be accurate, users should measure
health functions at rest as they would with traditional medical devices and refrain from measuring during exercise, smoking or
alcohol consumption. The smartwatch is not a medical device and the measurement results are for illustrative purposes only.

Phone camera control
Find a device
Alarm clock
Motion reminder
This function allows you to take pictures remotely with your
phone's camera, by activating the camera shutter button by
shaking the watch. To take a photo, select "Device" and then
"Remote camera". A useful feature for taking group photos from
a distance.
In the app, selecting "Find watch" will trigger a vibrating alarm
on the watch to help locate the device.
To set an alarm on the watch, select an alarm time and time in
the app. To do this in the app, select "Device" and then
"Alarms".
Hourly reminders can be set in the app so that the watch, when
it detects that a person remains motionless for an extended
period of time, reminds them to perform an activity. To enable
the function, select "Device" and then "Inactivity reminder".
17
Functions available in a dedicated application

Hydration reminder
Wrist movement screen wake-up (G-Sensor)
Automatic heart rate monitoring
In the app, you can set cyclical reminders every 30-180
minutes to remind the watch to reach for water. To enable this
function, in the app select "Device" and then "Hydration
reminder".
To enable the function of activating the watch screen with a
flick of the wrist, select "Device" and then "Wrist wake-up" in
the app.
In the app, you can set the heart rate measurement to be
performed on a cyclical basis. The frequency can be set within
a given time interval. The automatic measurement is performed
without our intervention. To activate the function, select
"Device" and then "Continuous heart rate monitoring" in the
app.
Setting automatic measurements reduces battery life.
18
Functions available in a dedicated application

IP68** water resistance
Allows you to use the watch
while washing your hands or
on a rainy day.
370mAh battery
The large battery capacity
enables long use of the
smartwatch.
Sporty design
Durable materials and
silicone strap for easy
cleaning.
RTL8762C processor
An innovative processor
characterised by high
performance.
**The IP68 standard allows a water temperature of +10 to +35 degrees Celsius and immersion to a depth of 1.5m for up to 30min. The watch
cannot be used in hot baths or saunas as it is not steam resistant. It is not designed for swimming, it has been designed to help look after
your health.
General Information
Specifications

20
General Information
Product complaint
Any product bought in the Shop can be claimed. The claim
given by the manufacturer is 2 years from the purchase of
the equipment.
The advertised product should be sent to the address:
Watchmark CH Marino, 7 Paprotna Street, 51-117 Wrocław.
To register a complaint, please fill in the form at
https://ecom.freshdesk.com/support/tickets/new.
After registering the complaint, you will receive a
confirmation of its submission to the specified e-mail address
along with a pdf attachment containing a summary of the
complaint. The complaint must be accompanied by the
advertised product with proof of purchase and the
application number received in the e-mail.
Once the goods have been verified, the Complaints
Department will contact the customer and inform them that
the complaint has been processed.
The complaint will be considered within 30 days from the
day the Complaints Department receives the advertised
goods.