WATCHMARK G-Wear User manual

WWW.WATCHMARK.COM
USER MANUAL

Installing the app 9
Smartwatch functions 10
Music playback
Picture taking
Calorie counter
Sleep monitor
Sports modes
Stopwatch
Respiratory training
Alarm
Weather
Change of dial theme
Connections
Reset to factory settings
Settings
Time, date
Pedometer
Brightness adjustment
Distance travelled
Blood pressure
Heart rate
Saturation
11
12
13
14
15
TABLE OF CONTENTS
Introduction Applications and functions
About the watch 4
Device configuration
Packaging content
Hardware requirements
Charging the watch
Additional information
How to wear
a smartwatch?
7
Belt change 8
5
6

App functions 16
Measurement history
Reminder of movement
Hydration reminder
Alarm clock
Notifications
High heart rate alarm
Auto shut-off screen
G-Sensor
Cycle monitoring
Change of dial theme
Favourite contacts
More settings
Reset to factory settings
17
18
19
TABLE OF CONTENTS
General Information Applications and functions
Specifications 20
Product complaint
Product return
21
Product exchange
22
23

This is a smartwatch that will help you with your active lifestyle.
The metal envelope emphasises its unique design and the intuitive
menu in Polish makes it very easy to use. Thanks to the built-in
microphone and speaker, it is possible to make calls directly from
the smartwatch. The watch has up to 24 sports modes during
which it measures steps, calories burned and distance.
Device configuration
Contents of the package
4
Introduction
About Watchmark G-Wear
Smartwatch (colour and
material may vary depending on
the colour chosen)
Strap (colour and material
may vary depending on the
colour chosen)
Charger (colour and material
may vary depending on the
model selected)

iOS 8.0 and above
Android 5.1 and above
Bluetooth supported: 5.0
Hardware requirements
Charging instructions
This smartwatch uses magnetic charging.
Connect the charging cable to the USB input and to the rear
charging contacts of the device. Once connected, charging will
start automatically and the charging icon will appear on the
screen.
It takes approximately 2 hours to fully charge the battery. Do not
use the watch while it is charging.
Caution: do not connect the magnetic charging cable to any
2 contacts at the same time with conductive material, as this
may cause a short circuit.
Android 5.1+ IOS 8.0+
5

6
Please read the entire user manual carefully before using the
equipment. It is recommended to use only the original battery,
charger and accessories that are included in the kit received
with the device.
Neither the manufacturer nor the distributor is responsible for
the use of third-party accessories.
The functions that are presented in this manual may vary
between models, as the manual is a general description of
smartwatches. Some models may deviate from the standard.
Before using the device for the first time, charge it for a
minimum of 2 hours. Before using the device, you must
download and install the app and accept all consents that the
smartwatch asks for. If this is not done fully, not all features of
the device will be available. The smartwatch will only ask for
access to functions that are necessary for the smartwatch to
function properly.
The company reserves the right to change the content of this
manual.
Additional information

7
How to wear a smartwatch?
The strap for this watch model is 22 mm wide. It is
interchangeable and additional straps can be purchased in
a different colour or material.
Wearing the watch
When you're not exercising, wear the smartwatch as you
would a regular watch, i.e. one finger above your wrist bone.
To take full advantage of the heart rate monitoring function
during exercise, try wearing the device above your wrist
(2 fingers above your wrist bone) to improve comfort and
stability. Many exercises, such as cycling or weightlifting, can
cause the smartwatch's placement to change by bending the
wrist, for example. If the watch sits lower on the wrist bone
measurements can be intermittent, so correct placement
is important.

Belt change
Insert one end of the strap together with the telescope
into the recess of the watch envelope.
With the other end, insert the telescope into the centre of
the cavity and attach it to the watch.
Attach the original strap to the watch before using it. When
carrying out this operation, take careful care and watch out
for your fingernails when attaching the telescopes to the
watch.
1.
2.
Wearing the belt
Removing the belt
With one hand, press the wheel on the telescope and
gently push inwards.
Then, pull upwards until the telescope detaches from the
watch.
1.
2.

After installing the app, turn on Bluetooth on your phone and go
to the app. Create an account or log in anonymously. Allow
access. Then select the middle icon on the bottom bar in the app
and select 'Add device'. Select the K28H. For the app to work
properly, you need to give all the consents the app asks for.
To use the smartwatch to make and receive calls, connect the
watch via Bluetooth as well. On your phone, go to the Bluetooth
settings and establish a connection with the device named
"Audio_K28H". Without such a connection, some of the functions
will not be active.
The app for the G-WEAR smartwatch model is "Da Fit".
Download the app from the Google Play / App Store or via
the QR code below.
9
Google Play App Store
Applications and functions
Installing applications

Features available on the Smartwatch
Time, date
Pedometer
Screen backlight brightness adjustment
Distance travelled
The display shows the time, date and day of the week. The
data is displayed on the main screen of the watch.
Counts the steps taken on a given day (data resets each day
from 00:00). The number of steps taken can be seen in the app
or in the first tab to the right of the main screen.
Adjusting the brightness helps to protect your eyes from a
screen that is too bright at night, to adapt the backlight to the
outdoor situation and to save the watch's battery. You can find
this function in the drop-down menu from the main screen and
select the appropriate display brightness.
Information about the distance covered during the day.
Distance travelled can be found in the first tab to the right of the
main screen after clicking on the steps data.
10

Blood pressure (RR)*
Heart rate(HR)*
Oxygen saturation (SPO2)
Arterial pressure is the force with which the blood pushes against
the arterial walls during the contraction and diastole of the heart
muscle. The accepted norm for systolic pressure is 120 mm Hg,
while for diastolic pressure it is 80 mm Hg. On the watch, the
function for measuring blood pressure can be found in the menu to
the left of the main screen.
Heart rate, or pulse: this is the number of beats of the heart
muscle per 1 minute. The accepted norm is a limit between 60 and
100 beats per minute. When the pulse is elevated we speak of
tachycardia, while when it is reduced we speak of bradycardia.
Both conditions can be dangerous to our health. On the watch, the
function for measuring heart rate can be found in the menu to the
left of the home screen.
This function indicates the oxygenation level of the blood. As a
norm, the result should be between 95 and 100%. When the
oxygenation level drops, it can be dangerous for our health. On the
watch, the function for measuring saturation is located in the menu
to the left of the main screen.
*Do not make health decisions based solely on smartwatch results. For measurements to be accurate, users should measure
health functions at rest as they would with traditional medical devices and refrain from measuring during exercise, smoking or
alcohol consumption. The smartwatch is not a medical device and the measurement results are for reference only.
Features available on the Smartwatch

Music playback
Taking photos
Calorie counter
Once your watch is connected to your phone via the app and
music is enabled on your phone, you can play music from your
watch, pause and resume songs, as well as rewind and fast-
forward. To control music, turn it on on your phone and then go
to the music function in the menu to the left of the home screen.
The smartwatch can be used as a remote camera shutter. To
take a photo remotely, select the 'Shutter' function from the
menu, then go to the app. The camera on your phone will start
up. To take a photo, click the red button on the smartwatch.
Calculates the number of calories burned in a given day. The
data on calories burned can be found in the first tab to the left
of the home screen after clicking on step data.
12
Features available on the Smartwatch

Sleep monitor
Sports modes
Stopwatch
Respiratory training
A function that helps to analyse a person's sleep. The watch
shows the number of hours slept and the phases of sleep, in
which we distinguish between shallow and deep sleep. You can
find the sleep data in the menu to the left of the home screen.
The watch's 24 sports modes allow you to control your training
goals by monitoring steps, heart rate, calories and distance.
Workout data can be found in the app after synchronisation.
Available sports modes include running, walking, hiking,
cycling, skipping, badmington, basketball, golf and rowing. On
the watch, the sports modes function can be found in the menu
to the left of the home screen.
A function which is used to check and measure short distances
of time. On the watch, the stopwatch function can be found in
the menu to the left of the home screen in the settings.
Helps you to relax and calm down. On the watch, the breath
training function is located in the menu to the left of the home
screen.
13
Features available on the Smartwatch

Alarm
Weather
Changing the dial theme
Connections
To see the alarms you have set, go to the menu by pressing
the side button. To set an alarm clock go to the app. See page
16 for more.
The watch, when connected to the app and with Wifi/data on
the phone, will show the weather forecast. On the watch, the
weather function is located in the menu to the left of the home
screen.
There are several dials to choose from on the watch. To
change the dials, long press the main screen (about 3
seconds). You can download more dials in the app. See page
18 for more.
Connecting the watch to your phone via Bluetooth allows you to
make calls from the smartwatch while maintaining high sound
quality. To make a call, you can manually enter a number or
select from a list of your most frequent contacts. To add
contacts, go to the app. See page 18 for more.
14
Features available on the Smartwatch

Reset to factory settings
Settings
Resetting to factory settings allows you to reset the watch and
erase all data and settings. On the watch, the reset function is
located in settings in the menu to the left of the main screen in
settings.
In the settings you can:
-adjust the screen brightness,
-adjust the screen backlight time (up to a maximum of 30
seconds).
-play a game (Youg Bird or 2048)
-change the menu display style
-switch the smartwatch off
And also enable:
-receive and make phone calls
-cinema mode (reduce screen brightness and turn off vibration)
15
Features available on the Smartwatch

Functions available in a dedicated application
Measurement history
Movement reminder
Hydration reminder
Alarm clock
In the app, you will find the history of measurements taken by
the watch. To check the history, select the first icon on the
bottom bar in the app.
In the app, you can set cyclic reminders so that the watch,
when it detects that a person remains motionless for an
extended period of time, reminds you to perform an activity.
The mode is active from 10 a.m. to 10 p.m. To activate the
mode, select the second icon on the bottom bar in the app,
then "Other" and "Movement reminder".
In the app, you can set cyclical reminders every 15-240
minutes to remind the watch to reach for water. To enable this
feature, in the app, select the second icon in the bottom bar,
then 'Other' and 'Hydration Reminder.
To set an alarm on the watch, select the alarm time and time in
the app. To do this, select the second icon on the bottom bar in
the app and click 'Alarms'.
16

Notifications
Alert to inform you if your heart rate is too high
Screen auto shut-off
G-Sensor function
The app notification function allows you to read the beginning
of a message on the smartwatch screen. The smartwatch will
display SMS notifications and notifications from apps such as:
Facebook, Twitter, WhatsApp, Skype, Instagram, Line,
KakaoTalk, WeChat. To enable notifications, select the second
icon on the bottom bar in the app and then 'Notifications'.
When the watch detects irregularities related to your heart rate
during measurements, it will notify you. To enable this feature,
select the second icon in the bottom bar in the app, select
'Other' from the menu and then 'High heart rate alert'. You can
select an upper heart rate limit.
To set the screen's backlight time, select the second icon on
the bottom bar in the app, select "Other" from the menu and
then "Auto screen off".
To enable the wristwatch screen start function, select the
second icon on the bottom bar in the app, select 'Other' from
the menu and then 'Quick View'.
17
Functions available in a dedicated application

Monitoring the female cycle
Changing the dial
Favourite contacts
You can set up menstrual cycle monitoring in the app. The
smartwatch will remind you of upcoming menstruation and
ovulation. To enter your personal data, in the app, select the
second icon on the bottom bar, then "Other" and "Physiological
cycle reminder".
Many other dial themes are available in the dedicated app. To
select dials, in the app select the second icon from the bottom
bar, then "Watch appearance". Data/Wifi transmission must be
enabled.
On the smartwatch, you can have access to your 8 favourite
contacts for quick connectivity. To add contacts to the list on
the smartwatch, in the app, select the second icon from the
bottom bar and then "Favourite contacts". To access the
contacts list, the smartwatch must be connected via Bluetooth.
See page 9 for more.
18
Functions available in a dedicated application

19
More settings in the app:
Reset to factory settings
-enable/disable "Do not disturb"
-selection of phone language
-setting the unit system
-setting the weather forecast (city and temperature units)
-selection of daily step target
Resetting to factory settings allows you to reset the watch and
erase all data and settings. To reset the device and the app,
select the second icon on the bottom bar in the app, then
"Other" and "Reset".
Functions available in a dedicated application

IP67** water resistance
Allows you to use the watch
while washing your hands or
on a rainy day.
360mAh battery
The large battery capacity
allows for long use of the
smartwatch.
Modern design
Metal casing and excellent
screen quality, which is scratch-
resistant.
Realtek8762DT processor
A state-of-the-art processor
characterised by high
performance.
**The IP67 standard allows a water temperature of +10 to +35 degrees Celsius and immersion to a depth of 1m for up to 30min. The watch
cannot be used in hot baths or saunas as it is not steam resistant. It is not designed for swimming, it has been designed to help look after
your health.
General Information
Specifications