Watec WAT-910BD User manual

WAT-910BD
WAT-910BDWAT-910BD
WAT-910BD
OSD USER MANUAL
OSD USER MANUALOSD USER MANUAL
OSD USER MANUAL
Rev. 1.00
Watec Co., Ltd.
Watec Co., Ltd.Watec Co., Ltd.
Watec Co., Ltd.
October 23, 2013
1

Change History
Change HistoryChange History
Change History
Rev. No. Date Changes Remarks
1.00 2013.10.23 Initial Release
2

1. OSD MENU OPERATION
1. OSD MENU OPERATION1. OSD MENU OPERATION
1. OSD MENU OPERATION
............................
........................................................
............................
4
44
4
1-1. RC-01(5key remort controller)
1-1. RC-01(5key remort controller)1-1. RC-01(5key remort controller)
1-1. RC-01(5key remort controller)
............................
........................................................
............................
4
44
4
1-2. Example of operation
1-2. Example of operation1-2. Example of operation
1-2. Example of operation
............................
........................................................
............................
4
44
4
2. OSD MENU and FUNCTIONS
2. OSD MENU and FUNCTIONS2. OSD MENU and FUNCTIONS
2. OSD MENU and FUNCTIONS
............................
........................................................
............................
5
55
5
2-1. SETUP MENU(TOP MENU)
2-1. SETUP MENU(TOP MENU)2-1. SETUP MENU(TOP MENU)
2-1. SETUP MENU(TOP MENU)
............................
........................................................
............................
5
55
5
2-2. EXPOSURE MENU
2-2. EXPOSURE MENU2-2. EXPOSURE MENU
2-2. EXPOSURE MENU
............................
........................................................
............................
6
66
6
2-2-1. SHUTTER
2-2-1. SHUTTER2-2-1. SHUTTER
2-2-1. SHUTTER
............................
........................................................
............................
6
66
6
2-2-2. SENSE UP
2-2-2. SENSE UP2-2-2. SENSE UP
2-2-2. SENSE UP
............................
........................................................
............................
7
77
7
2-2-3. AGC
2-2-3. AGC2-2-3. AGC
2-2-3. AGC
............................
........................................................
............................
8
88
8
2-2-4. BLC
2-2-4. BLC2-2-4. BLC
2-2-4. BLC
............................
........................................................
............................
9
99
9
2-3. 3DNR MENU
2-3. 3DNR MENU2-3. 3DNR MENU
2-3. 3DNR MENU
............................
........................................................
............................
12
1212
12
2-4. WDR MENU
2-4. WDR MENU2-4. WDR MENU
2-4. WDR MENU
............................
........................................................
............................
13
1313
13
2-5. ADJUST MENU
2-5. ADJUST MENU2-5. ADJUST MENU
2-5. ADJUST MENU
............................
........................................................
............................
14
1414
14
2-5-1. SHARPNESS
2-5-1. SHARPNESS2-5-1. SHARPNESS
2-5-1. SHARPNESS
............................
........................................................
............................
14
1414
14
2-5-2. GAMMA
2-5-2. GAMMA2-5-2. GAMMA
2-5-2. GAMMA
............................
........................................................
............................
15
1515
15
2-5-3. SETUP-LEVEL
2-5-3. SETUP-LEVEL2-5-3. SETUP-LEVEL
2-5-3. SETUP-LEVEL
............................
........................................................
............................
16
1616
16
2-6. FUNCTIONS MENU
2-6. FUNCTIONS MENU2-6. FUNCTIONS MENU
2-6. FUNCTIONS MENU
............................
........................................................
............................
17
1717
17
2-6-1. FREEZE(EFFECT MENU)
2-6-1. FREEZE(EFFECT MENU)2-6-1. FREEZE(EFFECT MENU)
2-6-1. FREEZE(EFFECT MENU)
............................
........................................................
............................
17
1717
17
2-6-2. FLIP(EFFECT MENU)
2-6-2. FLIP(EFFECT MENU)2-6-2. FLIP(EFFECT MENU)
2-6-2. FLIP(EFFECT MENU)
............................
........................................................
............................
18
1818
18
2-6-3. ZOOM(EFFECT MENU)
2-6-3. ZOOM(EFFECT MENU)2-6-3. ZOOM(EFFECT MENU)
2-6-3. ZOOM(EFFECT MENU)
............................
........................................................
............................
19
1919
19
2-6-4. NEG.IMAGE(EFFECT MENU)
2-6-4. NEG.IMAGE(EFFECT MENU)2-6-4. NEG.IMAGE(EFFECT MENU)
2-6-4. NEG.IMAGE(EFFECT MENU)
............................
........................................................
............................
20
2020
20
2-6-5. MOTION(FUNCTIONS MENU)
2-6-5. MOTION(FUNCTIONS MENU)2-6-5. MOTION(FUNCTIONS MENU)
2-6-5. MOTION(FUNCTIONS MENU)
............................
........................................................
............................
21
2121
21
2-6-6. BPC(FUNCTIONS MENU)
2-6-6. BPC(FUNCTIONS MENU)2-6-6. BPC(FUNCTIONS MENU)
2-6-6. BPC(FUNCTIONS MENU)
............................
........................................................
............................
23
2323
23
2-6-7. DIGIT OUT(FUNCTIONS MENU)
2-6-7. DIGIT OUT(FUNCTIONS MENU)2-6-7. DIGIT OUT(FUNCTIONS MENU)
2-6-7. DIGIT OUT(FUNCTIONS MENU)
............................
........................................................
............................
24
2424
24
2-7. RESET MENU
2-7. RESET MENU2-7. RESET MENU
2-7. RESET MENU
............................
........................................................
............................
24
2424
24
2-8. EXIT MENU
2-8. EXIT MENU2-8. EXIT MENU
2-8. EXIT MENU
............................
........................................................
............................
24
2424
24
3. Save settings
3. Save settings3. Save settings
3. Save settings
............................
........................................................
............................
24
2424
24
4. OSD menu tree
4. OSD menu tree4. OSD menu tree
4. OSD menu tree
............................
........................................................
............................
25
2525
25
【
【【
【Contents
ContentsContents
Contents】
】】
】
3

1. OSD MENU OPERATION
1. OSD MENU OPERATION1. OSD MENU OPERATION
1. OSD MENU OPERATION
OSD MENU can be operated with "5 buttons" on the RC-01.
The functions of "5 buttons" are explained by the following picture.
1-1. RC-01(5key remort controller)
1-1. RC-01(5key remort controller)1-1. RC-01(5key remort controller)
1-1. RC-01(5key remort controller)
Button assignment on the remote controller.
When operating OSD menu, use 5 buttons of UP
UPUP
UP/DOWN
DOWNDOWN
DOWN/RIGHT
RIGHTRIGHT
RIGHT /LEFT
LEFTLEFT
LEFT/ENTER
ENTERENTER
ENTER .
UP
UPUP
UP/DOWN
DOWNDOWN
DOWN keys are primarily used to move the cursor when selecting the vertical directional item
in the OSD menu. RIGHT
RIGHTRIGHT
RIGHT /LEFT
LEFTLEFT
LEFT keys are primarily used to move the cursor when selecting the horizontal
directional item. ENTER
ENTERENTER
ENTER key is used to execute the selected item or function.
When there is a sub-menu to set the detailed functions, "↵" is displayed after the item name.
1-2. Example of operation
1-2. Example of operation1-2. Example of operation
1-2. Example of operation
Example of a menu operation by five key are as follows.
UP
LEFT RIGHT
DOWN
ENTER
UP
UPUP
UP DOWN
DOWNDOWN
DOWN
LEFT
LEFTLEFT
LEFT RIGHT
RIGHTRIGHT
RIGHT
RIGHT
RIGHTRIGHT
RIGHT LEFT
LEFTLEFT
LEFT
UP
UPUP
UP DOWN
DOWNDOWN
DOWN ENTER
ENTERENTER
ENTER
MANUAL GAIN MENU(sub-menu)
4

2. OSD MENU and FUNCTIONS
2. OSD MENU and FUNCTIONS2. OSD MENU and FUNCTIONS
2. OSD MENU and FUNCTIONS
2-1. SETUP MENU(TOP MENU)
2-1. SETUP MENU(TOP MENU)2-1. SETUP MENU(TOP MENU)
2-1. SETUP MENU(TOP MENU)
When pressing ENTER
ENTERENTER
ENTER key, SETUP menu will appear on the screen.
ENTER
ENTERENTER
ENTER
5

2-2. EXPOSURE MENU
2-2. EXPOSURE MENU2-2. EXPOSURE MENU
2-2. EXPOSURE MENU
When adjusting EXPOSURE settings, move the cursor to EXPOSURE and press ENTER
ENTERENTER
ENTER key.
Press UP
UPUP
UP/DOWN
DOWNDOWN
DOWN button to choose one of the items in EXPOSURE, press the ENTER
ENTERENTER
ENTER key to select,
and change it with LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key. Press the ENTER
ENTERENTER
ENTER key to set.
2-2-1. SHUTTER
2-2-1. SHUTTER2-2-1. SHUTTER
2-2-1. SHUTTER
Select Shutter Speed(or Shutter Mode) with LEFT/RIGHT key.
The default setting is EI.
ENTER
ENTERENTER
ENTER
Shutter Speed
Shutter Mode Details
X256
X128
X64
X32 Slow speed shutter Selected number of fields x 1/60s(EIA)or1/50s(CCIR) will be the
calculated fixed shutter speed in seconds.
X16
(fixed shutter speed)
X8
X4
X2
EI
EIEI
EI Electronic iris
It is the function which adjusts the shutter speed from the slow
shutter speed (selected with the SENS UP menu) to 1/100000(sec),
which depends on brightness of a camera object, and maintains a
proper exposure state.
EIA: 1/60
CCIR:1/50
FL The High speed shutter is defined as the selected Shutter Speed.
FL is the abbreviation of FLICKER-LESS(1/100(sec):EIA or
1/120(sec):CCIR).
1/250
1/500 High speed shutter
1/1000
(fixed shutter speed)
Note. Only when selecting 1/60(1/50) Shutter Speed, the EI range
is from the selected slow shutter speed in the SENS UP setting, up
to 1/60(1/50), and the EI can maintain a proper exposure of a
camera object within this range.
1/2000
1/5000
1/10000
1/100000
6

2-2-2. SENSE UP
2-2-2. SENSE UP2-2-2. SENSE UP
2-2-2. SENSE UP
When selecting EI(electronic iris) or 1/60(1/50) in SHUTTER, Slow speed shutter can be used to
adjust exposure. Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select ON/OFF. When pressing ENTER
ENTERENTER
ENTER key after selecting ON,
the maximum number of fields under the SENS UP operation can be selected.
The default setting is x8.
LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT
ENTER
ENTERENTER
ENTER
The maximum number of fields in Slow Shutter Mode. →
Shutter Mode SENS UP Details
EI
EIEI
EI
OFF
ELECTRONIC IRIS MODE
from (EIA:1/60(S),CCIR:1/50(S)) to 1/100,000(S) shutter speed.
ON
ONON
ON
ELECTRONIC IRIS with slow speed shutter MODE
from SENCE-UP(number of FLD) to 1/100,000(S)
EIA :1/60
CCIR:1/50
OFF
FIXED SHUTTER SPEED MODE
Shutter speed is fixed EIA:1/60(S) or CCIR:1/50(S).
ON
ONON
ON
ELECTRONIC IRIS MODE with slow speed shutter
from SENCE-UP(number of FLD) to (EIA:1/60(S),CCIR:1/50(S))
(other) OFF
FIXED SHUTTER SPEED MODE
Shutter speed is fixed in SHUTTER menu.
7

2-2-3. AGC
2-2-3. AGC2-2-3. AGC
2-2-3. AGC
AGC Value can be changed.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to setup AGC Value. During selecting OFF, when pressing ENTER
ENTERENTER
ENTER key, SUB MENU for
MANUAL GAIN Settings appears.
The default setting is HIGH. When selecting OFF, AGC is fixed to 6dB as default.
<- Fixed GAIN
AGC Mode (Sub Menu) Details
OFF
GAIN
FIXED GAIN MODE
By using LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT , fixed gain from 6 to 41(dB) is selectable.
RETURN
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to EXPOSURE Settings. Pressing ENTER
ENTERENTER
ENTER key on END, OSD
menu turns off and SETUP is finished.
LOW －
AGC(LOW) MODE
Amp gain is automatically changed in range of 6 to 30(dB).
MID －
AGC(MID) MODE
Amp gain is automatically changed in range of 6 to 34.5(dB).
HIGH
HIGHHIGH
HIGH －
AGC(HIGH) MODE
Amp gain is automatically changed in range of 6 to 41(dB).
LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT
ENTER
ENTERENTER
ENTER
8

2-2-4. BLC(BackLight Compensation)
2-2-4. BLC(BackLight Compensation)2-2-4. BLC(BackLight Compensation)
2-2-4. BLC(BackLight Compensation)
Select Backlight operation on the menu. Traditional Backlight Compensation(BLC) mode and High Light
Suppress Backlight(HSBLC) mode can be selected.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select OFF/BLC/HSBLC. When BLC/HSBLC is selected, press ENTER
ENTERENTER
ENTER to show Sub Menu.
The default setting of BLC is OFF. When selecting BLC, the default GAIN is MID. When selecting HSBLC,
the default level of HSBLC is 4. The area default of BLC HSBLC is as follows.
Note. BLC/HSBLC does not work under the condition below.
SHUTTER is fixed shutter speed mode & SENS UP is OFF & AGC is OFF
However, when selecting HSBLC, the high lighting area is masked.
(The size of the effective area is the default setting.)
LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT
ENTER
ENTERENTER
ENTER ENTER
ENTERENTER
ENTER
Sub Menu →
9

1
11
1
How HSBLC effects on image when changing LEVEL
BLC Mode (Sub Menu) Details
OFF － The BLC function is OFF.
BLC
GAIN
Change the level of BLC effect with LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key.
LOW / MID / HIGH
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select GAIN.
AREA Press the ENTER
ENTERENTER
ENTER key to position and set the size of the BLC
area window
2
22
2
.
DEFAULT
Return the setting to default when pressing the ENTER
ENTERENTER
ENTER key.
If selecting DEFAULT, changed GAIN/AREA will return to the
initial setting.
RETURN
Use LEFT/RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to EXPOSURE Settings. Pressing ENTER
ENTERENTER
ENTER key on END, OSD
menu turns off and SETUP is finished.
HSBLC
LEVEL
Defining the brightness level of the high lighting area
1
11
1
to be
covered by a mask.
0(only high brightness area) - 8(high and low brightness area)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to change the level.
AREA Press the ENTER
ENTERENTER
ENTER key to position and set the size of the BLC
area window
2
22
2
.
DEFAULT
Return the setting to default when pressing ENTER
ENTERENTER
ENTER key.
If selecting DEFAULT, changed LEVEL/AREA will return to the
initial setting.
RETURN
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to EXPOSURE Settings. Pressing ENTER
ENTERENTER
ENTER key on END, OSD
menu turns off and SETUP is finished.
LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT
LEVEL=0 LEVEL=4 LEVEL=8
10

2
22
2
How to set up the BLC/HSBLC area
1) POSITION Setting
The position of the effective BLC/HSBLC area can be set
on this Setting.
The horizontal position of the effective BLC/HSBLC area
can be moved by pressing UP
UPUP
UP&RIGHT
RIGHTRIGHT
RIGHT /DOWN
DOWNDOWN
DOWN&LEFT
LEFTLEFT
LEFT key.
After pressing ENTER
ENTERENTER
ENTER key, adjusting the vertical
position can be conducted in same way as the horizontal
position adjustment. The size can be set after
the position is set by pressing the ENTER
ENTERENTER
ENTER key.
*HINT: When positioning the window, align the top left
corner to the desired window position's top left corner,
as the SIZE Setting references this corner.
2) SIZE Setting
The size of the effective BLC/HSBLC area can be adjusted
on this setting.
Use UP
UPUP
UP&RIGHT
RIGHTRIGHT
RIGHT /DOWN
DOWNDOWN
DOWN&LEFT
LEFTLEFT
LEFT key to adjust the horizontal
size. After the adjustment, press ENTER
ENTERENTER
ENTER key. Use the
same key to adjust the vertical size.
When finishing the size adjustment, press ENTER
ENTERENTER
ENTER key.
3) RET/AGAIN Setting
Use UP
UPUP
UP&RIGHT
RIGHTRIGHT
RIGHT /DOWN
DOWNDOWN
DOWN&LEFT
LEFTLEFT
LEFT key to select RET/AGAIN.
ENTER
When pressing ENTER
ENTERENTER
ENTER key on AGAIN,
returning to POSITION Setting.
ENTER
When pressing ENTER
ENTERENTER
ENTER key on RET,
returning to BLC/HSBLC Menu.
11

2-3. 3DNR MENU
2-3. 3DNR MENU2-3. 3DNR MENU
2-3. 3DNR MENU
Three-dimensional noise reduction(3DNR) can be set on this menu.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select ON/OFF. When ON is selected, press ENTER
ENTERENTER
ENTER key to show Sub Menu.
The default setting is ON, and the default level is 50.
Note. Setting the larger value of the 3DNR LEVEL means that random noise is reduced more effectively,
however, moving object resolution may be reduced, and/or fixed pattern noises may increase.
LEFT/RIGHT
ENTER
LEFT/RIGHT
LEVEL=0 LEVEL=50 LEVEL=100
3DNR Mode (Sub Menu) Details
OFF － 3DNR is OFF.
ON
LEVEL
Level of the 3DNR.
From 0(weak) to 100(strong)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to change the level.
RETURN
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to SETUP screen. Pressing ENTER
ENTERENTER
ENTER key on END, OSD
menu turns off and SETUP is finished.
12

2-4. WDR MENU
2-4. WDR MENU2-4. WDR MENU
2-4. WDR MENU
The dynamic range of dark and/or bright part is expanded by digital processing.
Select WDR function OFF/USER1/USER2 with LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key.
When USER1/USER2 is selected, press ENTER
ENTERENTER
ENTER key to show Sub Menu.
The default setting is OFF. The default setting of USER1/USER2 for dark part is 3(USRE1)/9(USER2).
The default setting for bright part is 13(USER1)/11(USER2).
Sub Menu ->
Note. There is no difference with WDR function between USER1 and USER2.
LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT
WDR effect in the bright area
WDR effect in the dark area ENTER
ENTERENTER
ENTER ENTER
ENTERENTER
ENTER
WDR Mode (Sub Menu) Details
OFF － Dynamic range expanding function is OFF.
USER1 / USER2
L-LEVEL
(L-LEVEL) Expanding level of the dark part.
From 0(weak) to 15(strong)
(larger value means more effective)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to change the level.
H-LEVEL
(H-LEVEL) Expanding level of the bright part.
From 0(strong) to 15(weak)
(smaller value means more effective)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to change the level.
RETURN
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to SETUP screen. Pressing ENTER
ENTERENTER
ENTER key on END, OSD
menu turns off and SETUP is finished.
13

2-5. ADJUST MENU
2-5. ADJUST MENU2-5. ADJUST MENU
2-5. ADJUST MENU
Use this setting to adjust the image quality.
Select ADJUST and press ENTER key to show Adjust menu.
Use UP
UPUP
UP/DOWN
DOWNDOWN
DOWN key to select one of the lists on the menu, and use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to adjust.
2-5-1. SHARPNESS
2-5-1. SHARPNESS2-5-1. SHARPNESS
2-5-1. SHARPNESS
By using LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT buttons, SHARPNESS(edge enhancement) adjustment is available.
The default setting is 4.
Sharpness value range is 0 to 31.
ENTER
ENTERENTER
ENTER
SHARPNESS=0
SHARPNESS=4
SHARPNESS=8
SHARPNESS=16
SHARPNESS=31
14

2-5-2. GAMMA
2-5-2. GAMMA2-5-2. GAMMA
2-5-2. GAMMA
GAMMA characteristic is adjustable from USER
3
33
3
, 0.05 to 1.0 (0.05 steps).
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to adjust GAMMA.
The default setting is 0.45.
Please select a proper gamma value to match a monitor's characteristics. Generally, a dark part in
a video frame becomes bright when gamma value is small. However, increases in appearances
of "white outs" and noises may occur.
3
33
3
The characteristic of USER mode
(However, the VIDEO output of dark parts in USER mode becomes lower than in 0.45.)
The
fig
LEFT/RIGHT
LEFT/RIGHTLEFT/RIGHT
LEFT/RIGHT
GAMMA=0.05 GAMMA=0.45 GAMMA=1.00
USER mode is a gamma curve of 0.45 which has improved S/N in dark parts of the image.
15

2-5-3. SETUP-LEVEL
2-5-3. SETUP-LEVEL2-5-3. SETUP-LEVEL
2-5-3. SETUP-LEVEL
Only 0IRE/7.5IRE can be set.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to set the level.
The default setting is 7.5IRE.
Note. SETUP-LEVEL is available to EIA only. There is no menu available to CCIR.
LEFT/RIGHT
LEFT/RIGHTLEFT/RIGHT
LEFT/RIGHT
16

2-6. FUNCTIONS MENU
2-6. FUNCTIONS MENU2-6. FUNCTIONS MENU
2-6. FUNCTIONS MENU
The digital image adjustment can be set.
When pressing ENTER
ENTERENTER
ENTER on FUNCTIONS, FUNCTIONS menu will appear. Use UP
UPUP
UP/DOWN
DOWNDOWN
DOWN to select one of the lists on
the menu and press ENTER
ENTERENTER
ENTER . After that, Sub menu related to digital image adjustment will appear.
In selecting MOTION, use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT to select ON/OFF.
When pressing ENTER
ENTERENTER
ENTER key on EFFECT, the list of digital image adjustment will appear.
2-6-1. FREEZE(EFFECT MENU)
2-6-1. FREEZE(EFFECT MENU)2-6-1. FREEZE(EFFECT MENU)
2-6-1. FREEZE(EFFECT MENU)
Select ON/OFF state by using LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT buttons.
When the FREEZE function is turned ON, the video output signal will be a repeat of the same frame
picture.
The default setting is OFF.
ENTER
ENTERENTER
ENTER
ENTER
ENTERENTER
ENTER
17

2-6-2. FLIP(EFFECT MENU)
2-6-2. FLIP(EFFECT MENU)2-6-2. FLIP(EFFECT MENU)
2-6-2. FLIP(EFFECT MENU)
OFF(normal image), H-FLIP(horizontal flip), V-FLIP(vertical flip)
and HV-FLIP(horizontal and vertical flip) are available.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select one of the effects. The default setting is OFF.
1
11
1
H-FLIP : For example, a back monitor on automobiles is a possible application.
2
2 2
2
HV-FLIP : Rotating the image by 180 degrees.
1) OFF (Normal Image) 2) H-FLIP
1
11
1
(Horizontal Flip)
3) V-FLIP (Vertical Flip) 4) HV-FLIP
2
22
2
(Vertical and Horizontal Flip)
18

2-6-3. ZOOM(EFFECT MENU)
2-6-3. ZOOM(EFFECT MENU)2-6-3. ZOOM(EFFECT MENU)
2-6-3. ZOOM(EFFECT MENU)
Digital zoom function is available.
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to select ON/OFF. When pressing ENTER
ENTERENTER
ENTER key on ON, Sub Menu will appear.
The default setting is OFF. When selecting ON, x1.0 is the default value of the magnification,
and 0 is the default value of PAN and TILT.
Sub Menu ->
4
44
4
Magnification Steps x1.0 to x4.0 : x0.1steps x8.0 to x16.0 : x1.0steps
x4.0 to x8.0 : x0.5steps x16.0 to x32.0 : x2.0steps
LEFT/RIGHT
LEFT/RIGHTLEFT/RIGHT
LEFT/RIGHT
ENTER
ENTERENTER
ENTER
ZOOM (SUB MENU) Details
OFF － Normal image(digital zoom OFF)
ON
ZOOM
Set up the magnification of digital zoom.
The magnification ranges from x1.0 to x32.0.
4
44
4
By using LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT keys,it can be set to a maximum magnification
of 32 times.
PAN
Horizontal PAN position is specified (invalid when ZOOM is
set to x1.0 magnification).
From -100(LEFT) to 100(RIGHT),(0 is center position)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to set the imaging position.
TILT
Vertical TILT position is specified (invalid when ZOOM is
set to x1.0 magnification).
From -100(LEFT) to 100(RIGHT),(0 is center position)
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to set the imaging position.
RETURN
Use LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key to show RET/END. Pressing ENTER
ENTERENTER
ENTER key on RET,
returns to FUNCTIONS Settings. Pressing ENTER
ENTERENTER
ENTER key on END,
OSD menu turns off and SETUP is finished.
19

Example (Digital zoom setting)
Example (Digital zoom setting)Example (Digital zoom setting)
Example (Digital zoom setting)
2-6-4. NEG.IMAGE(EFFECT MENU)
2-6-4. NEG.IMAGE(EFFECT MENU)2-6-4. NEG.IMAGE(EFFECT MENU)
2-6-4. NEG.IMAGE(EFFECT MENU)
Select Negative image (NEG.IMAGE) function ON/OFF with LEFT
LEFTLEFT
LEFT/RIGHT
RIGHTRIGHT
RIGHT key.
The default setting is OFF.
LEFT/RIGHT
LEFT/RIGHTLEFT/RIGHT
LEFT/RIGHT
20