wateroam ROAMfilter Plus User manual

ROAMfilter Plus User Guide
Troubleshooting: Bubble Point Test
© 2020

Key Components of the ROAMfilter Plus:
Front View Back View
Note: A detailed version can be found in your ROAMfilter Plus Instruction Manual

Key Components of the ROAMfilter Plus:
Note: A detailed version of the Key Components can be found in your ROAMfilter Plus Instruction Manual

Purpose of Bubble Point Test
●The Bubble Point Test is conducted to ensure that the system is well
sealed without any leakages.
●If the system fails the Bubble Point Test there may be a leak and the
system may not be operating at its optimal capacity.

Bubble Point Test
Required materials:
A bucket of clean and
pathogen-free water

Click here for the: ROAMfilterTM Plus Bubble Point Test video
Video Tutorial: Bubble Point Test

Bubble Point Test
Important pointers:
1. Recommended to be conducted once every three months or after
every reassembly process.
2. Before conducting the test ensure that the Top Assembly, Bottom
Assembly and Drain Valve are properly tightened.
3. Some air bubbles are to be expected when the system is first
submerged into the water. This is not an indication of leakage.

Thank You
Contact details:
Phone number: [phone]
Email: [email protected]
Any questions?