wateroam ROAMfilter Plus User manual

BUILDING A WORLD WITHOUT PROLONGED THIRST
ROAMfilter Plus User Guide
Realignment
© 2020

Key Components of the ROAMfilter Plus:
Front View Back View
Note: A detailed version can be found in your ROAMfilter Plus Instruction Manual

Key Components of the ROAMfilter Plus:
Note: A detailed version of the Key Components can be found in your ROAMfilter Plus Instruction Manual

Realignment
Purpose of Realignment: Realignment of the Top or Bottom Assembly may
be required to mount the filter for wall-installation, for use of previously laid
piping, or to better optimise the distribution of clean water.
Required items:
2 belt wrenches 1 assistant

In this example, the ROAMfilterTM Plus is being fixed to the wall in a location closer to patients at this clinic

Realign to accommodate different operational methods:

Click here for the: ROAMfilterTM Plus Realignment video
Video Tutorial: Realignment

ROAMfilterTM Plus
Bottom Assembly Realignment

Bottom Assembly Realignment
To realign the Hose Connector, the entire Bottom Assembly must be removed
and rotated. When replacing the Bottom Assembly, the starting direction of
the Hose Connector will also be the ending direction once it is fully tightened.
In the following slides, there are two diagrams of Bottom Assembly
realignment:
1. To position the Hose Connector to the front
2. To position the Hose Connector to the back (this is the default position)

Bottom Assembly Realignment 1 - Starting position/Intended ending position
Front Tap always faces the Front
Starting position and intended ending position