Waterway 600-0111 User manual

2 ½" S / 3" SPG SERVICEABLE SWING CHECK VALVE
INSTALLATION INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
IMPORTANT: Directional ow of water is essential for proper
function. Serviceable Swing CheckValve is designed for both 2 ½"
Socket and 3" Spigot pipe.
IMPORTANT: Prior to installation of valve to ttings, remove lid/
valve assembly (#2) to prevent accidental gluing of components.
CAUTION: DO NOT allow any glue into the valve body beyond the
pipe stops.
MOUNTING INSTRUCTIONS
The CheckValve can be installed in either horizontal or vertical
plumbing. For vertical plumbing, use only with upward ow.
Follow CORRECT / INCORRECT diagrams below to ensure upward
ow.
2200 East Sturgis Road, Oxnard, CA 93030 • Ph. [phone] • Fax [phone]
www.waterwayplastics.com • [e-mail] 810-0270.0310
© 2010 Waterway Plastics
Straight Body Check Valve (600-0111)
CORRECT INCORRECT
UPWARD
FLOW
(CORRECT)
DOWNWARD
FLOW
(INCORRECT)
5 6

SERVICEABLE SWING CHECK VALVE REPLACEMENT PARTS
SWING CHECK VALVE LOCATION
• Water ow MUST be in the direction of the arrow.
IMPORTANT: Locate the Swing CheckValve at the lowest
possible position in the plumbing system. Allow for a
minimum of 18" water column. The weight of the water
column assists in a greater valve seal and function.
MAINTENANCE
The clear cover permits easy inspection of the Swing
Check Valve. If necessary, the valve can be disassembled
for inspection of the o-ring and valve assembly. Before
reassembly, lubricate o-ring thoroughly with appropriate
silicone lubricant.
# Part No. Description
1 819-0025 Screws (8 required)
2 605-0111 Lid & Flapper Assembly
3 805-0241 O-Ring
4 N/A Body (must purchase complete valve)
-- 810-0270 Instruction Sheet
810-0270.0310
© 2010 Waterway Plastics
18" Minimum
Recommended
Flow
Swing Valve
Assembly
1
2
3
4
3" Swing Check Valve Assembly Performance Curve
Flow Rate (GPM)
Pressure Dierential (PSI)
0 50 100 150 200 250
0
1
0.2
1.2
0.4
0.6
0.8