Wattbike ATOM User manual

QUICK START GUIDE

ATOM QUICK START GUIDE
WELCOME
TO YOUR
WATTBIKE
ATOM
01
This guide will show you how to
build and setup your Atom, connect
your devices and give you tips to get
the most from your Atom’s features.

WEIGHT 44kg, 97lb
MAX RIDER WEIGHT 135kg, 21st 3lb, 297lb
POWER REQUIREMENTS Mains powered — 12v,
2A DC power supply
RESISTANCE TYPE Rare-Earth Magnet
WIRELESS TECHNOLOGIES
Bluetooth 4.0, ANT+ (FE-C ready,
PWR, S&C), ANT (Heart Rate
Only), Polar (Heart Rate Only)
FOOTPRINT
100cm (l) x 50cm (w) x 150cm (h)
- tri-bar & tablet holder fully
exten de d)
COMPATIBLE HR DEVICES Bluetooth 4.0, ANT+,
ANT (Suunto), Polar
HANDLEBAR DIAMETER 26mm
GEARS (VIRTUAL) 22
GRADIENT RANGE 0 — 25%
ATOM
QUICK START GUIDE
02 IN THE BOX
SPECIFICATION
– 3, 4, 5 and 6mm
Allen keys
– 15mm spanner
– Power adaptor
– Combination pedals
– Device holder
– Tri-bars
– Atom Tri-pads
– Atom

BLUETOOTH 4.0,
ANT+ AND FEC
CO MPATIBILIT Y
WATTBIKE ATOM
FEATURES
FULLY
A D J U S TA B L E
H A N D L EB A R S
ADJUSTABLE
DEVICE HOLDER
INTEGRATED
G E A R S H IF T E R S
TR ANSPORTATIO N ROLLERS
FITTED WITH INLINE SKATE
BALL-BEARING WHEELS
2 BOTTLE
C A G E S
A D J U S TA B L E
SADDLE HEIGHT
S E A T F O R E /A F T
ADJUSTABILITY
0–2000 POWER RANGE
+/-2% ACCURACY
PEDALS FITTED
AS STAN DAR D
03

ATOM QUICK START GUIDE
1Remove the Atom and its accessories from the packaging.
2A Screw the right pedal onto the right crank. Tighten
clockwise securely using the provided spanner N.B. The
cranks have a standard screw tment, allowing you to
customise the Atom with pedals of your choice.
2B Screw the left pedal onto the left crank. Tighten anti-
clockwise securely using the spanner.
3A Take the Tri-bar assembly and insert the two ends into the
Tri-bar clamps with device holder out in front of the bike.
3B Level up the two Tri-bar ends in their clamps, tighten the
securing screw using the 4mm Allen key.
3C Insert the two plastic bungs into the open ends of the
Tri-bar ends.
04 GET READY
TO RIDE
BUILD
4Take the metal Tri-pad cups, rest them on the blocks
and screw into place to secure. Remove the velcro from
the back of the pads (without removing the protective
layer). Once off, remove the protective layer and afx to
the metal Tri-pad cup. You can now fasten the Tri-pads
in position on to the velcro.
5Before riding the Atom ensure all bolts are tight and the
handlebar xings are secure.
6Plug your Atom into a wall outlet using the power
adaptor provided. Make sure the switch on both the wall
outlet and the rear of the Atom are turned on.

ATOM QUICK START GUIDE
SET UP
Use the corresponding levers and adjusters to set up the
Atom to your preferred cycling position.
Make all adjustments off the bike.
1Raise or lower your saddle height using the lever on the rear
of the saddle stem. Loosen the lever to adjust the stem and
ensure the lever is quite tight to secure.
2Adjust your saddle fore/aft position using a 4mm
Allen key to loosen the saddle slider. After adjusting,
tighten to secure.
3Set your handlebar height using the lever on the front of
the handlebar stem. Loosen the lever to raise or lower the
handlebars, tighten to secure.
4Adjust your handlebar fore/aft position using the 5mm Allen
key to loosen the handlebar. After adjusting, tighten to
secure.
TIP: We recommend you have your handlebars
between 4-10cm lower than your saddle height.
5Open the red locking rings on the device holder and
slide your device into place. Rotate the red locking rings
backwards to secure.
6Visit wabike.com/biket to accurately replicate your real
ride bike gures onto the Atom.
FIG 01

Once your Atom is set up, you’ll need to link your devices before
you can start riding.
1Turn your devices Bluetooth™ on.
2Download the Wattbike app
from your app store.
3Open the app, login or sign up. To connect your Atom:
• tap just ride
• tap the top right corner (FIG 02)
• select your Atom ID from the list.
4Connect your heart rate monitor. The Atom can connect
to Bluetooth™, ANT+, ANT (SUUNTO) and Polar heart rate
monitors. They can be paired up in the Wattbike Hub before
starting your session.
TIP: Wear your heart rate belt before
trying to connect it to your Atom.
ATOM QUICK START GUIDE
05 GET CONNECTED
HR SensorClose Wattbike
Click here to connect your HR belt Click here to connect the Atom
FIG 02
You can connect to other training apps via
Bluetooth™ or ANT+.

ATOM
QUICK START GUIDE
06 STORAGE
After each session, wipe any sweat,
water or foreign objects from the
Atom. If you need to store your Atom,
make sure it is unplugged and use
the wheels to guide it to a safe place.
ADDITIONAL
RESOURCES
For more information and full
set up guides, visit the support
section of wattbike.com

WB17_0037
WATTBIKE.COM @Wattbike /Wattbike /Wattbike /Wattbike