Watts Tekmar WiFi Snow Melting Control 670 User manual

User Manual
WiFi Snow Melting Control 670

2 of 8
Introduction
The WiFi Snow Melting Control 670 operates hydronic and electric heating equipment designed to melt snow and/or
ice from roads and walkway surfaces. The control works with the tekmar Snow/Ice Sensor 090 or Snow Sensor 095 to
automatically detect snow or ice and operates a single boiler, steam valve, or electric cable to supply heat to the slab.
Boiler return protection is provided to non-condensing boilers using a mixing valve or variable speed injection mixing
pump. The Watts® Home mobile application allows for remote operation and monitoring of the snow melting system from
anywhere in the world.
Manual Melting Operation
Automatic Melting Operation
Press Melt button to start melting operation
Manual Start and Timed Stop
• Start from Control display
• Start from Watts® Home mobile app
• Start from manual switch contact
• Start from tekmarNet® User Switch
Automatic Start and Stop
• The Snow/Ice Sensor 090 or 094 is installed in the road or sidewalk.
OR
Automatic Start and Timed Stop
• The Snow Sensor 095 is installed on a pole outside the building.
The automatic sensors require regular cleaning at least once per year to ensure reliable operation. Clean the sensor with hot
soapy water and scrub with a nylon brush, then rinse and wipe clean with a cloth.

3 of 8
SYSTEM IS MELTING
The control has either detected
snow/ice and automatically started
or the control was manually started.
SYSTEM IS OFF
The snow melting system is off and is
ready to detect snow or ice.
SYSTEM IS IDLING
The control is pre-heating the slab
to the idling temperature. This
reduces the amount of time needed
to reach the melting temperature in
the event snow or ice is detected.
STORM PREDICTED
The Internet local weather forecast is
predicting a snow fall and the control
is pre-heating the slab. This reduces
the amount of time needed to reach
the melting temperature in the event
snow or ice is detected.
SYSTEM IN OVERRIDE
The control is in a manual override
for testing purposes or manually
disabled.
The snow melting system operates in one of these five modes:
User Interface
View status of sensor
readings and equipment
Remaining melting
run time
System operation
information
Go to settings menu
to setup control
Information about slab
and outdoor
conditions
Symbols
!
WARNING SYMBOL
The control has a error message. Press the warning symbol to determine the error code and information on how
to take corrective action. Refer to the Installation and Operation Manual for a list of error codes.

4 of 8
Watts® Home App
Before using the WiFi features of this product, you must accept the Terms of Use, as amended from time to time and available
at Watts.com/terms-of-use. If you do not accept these terms, this product can still be used without WiFi features.
This product requires WiFi WPA2 security. WiFi networks with security disabled or that use WEP are not supported.
To view and adjust the WiFi Snow Melting Control 670 using a mobile phone or tablet, download the Watts Home mobile app
from the Apple® iTunes ® Store or from the Google Play® Store.
Add Control to App
Step 1
Create a new account. Then
sign in using your username
and password.
Step 4
Press the Location
name and Add New
Device.
Step 3
Swipe left (Apple) or
long hold (Android)
to edit the Location
name.
Step 2
On the control, go to the
WiFi menu and press
Register Device.
Step 5
Enter the 8 digit code from
the control into the mobile
app. Then enter the control's
device name.
The control is now
listed on the Devices
page.
Sign In
Create Account
Registration
To finish registering your snow melt control, enter
the code displayed below in the Watts Home mobile
app.
Back Help
12345678

5 of 8
Toggle to
 Away to
save energy
when you
are away
for a day or
more
Press  for settings Swipe left or long hold to
edit or remove location
Swipe left or long hold to
edit or remove device
Settings Locations
Devices
Using the App
Current system operation status
Select between Off and Melt
operation
 Energy use
 Refresh
 Control settings
Control

6 of 8
Toggle between weekly
and monthly energy use
Invite other users to
access all the devices at
a location
Adjust control
temperature unit setting
Update your user name
Energy Use
Invite Users
Control Settings
My Account
user name
[e-mail]

7 of 8
Change the notification
and unit settings for your
account
Settings
1555 555 5555

670_U - 02/20 © 2020 tekmar Control Systems Ltd.
Tel: [phone] • Fax: [phone]
tekmarControls.com
All specications are subject to change without notice
Need help? Go to our website or contact us.
tekmarControls.com | [e-mail] | 1-800-438-3903