Waves dspro STAGERGRID 4000 User manual

1 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
USER GUIDE

1 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
SUMÁRIO
About................................................................................................................................................................ 2
STAGEGRID 4000........................................................................................................................................... 2
SoundGrid..................................................................................................................................................... 3
System Requirements ................................................................................................................................... 3
Hardware.......................................................................................................................................................... 4
Package contents .......................................................................................................................................... 4
Rack Installation............................................................................................................................................ 5
Setups........................................................................................................................................................... 6
Front Panel ................................................................................................................................................. 10
Back Panel................................................................................................................................................... 12
Software ......................................................................................................................................................... 13
Control Panel .............................................................................................................................................. 16
Firmware Update........................................................................................................................................ 22
Specification ................................................................................................................................................... 23

2 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
ABOUT
STAGEGRID 4000
Thank you for choosing DSPRO STAGEGRID 4000 for your SoundGrid system.
This stagebox features 32 microphone inputs and 16 analog outputs and thus is, in conjunction with Waves
eMotion LV1, an excellent solution for live mixing.
The preamplifier was entirely designed with attention to each detail in order to achieve a pure sound and
superior clarity to enable the full potential of the mixing console. Using a discrete design, its performance
compares to the best systems on the market.
Designed for the Road, components were carefully selected to improve system reliability and strength,
including redundant power supply units.
The main features are:
32 Microphone or line inputs
16 balanced analog outputs on XLR connectors
4 stereo AES / EBU inputs and 4 outputs
Sampling Rates from 44.1kHz to 96kHz
2 Headphones with volume control
Input and output of Word Clock in BNC
SoundGrid Ethernet connection
Redundant AC power supply

3 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
SoundGrid
SoundGrid is a flexible and scalable network audio distribution infrastructure for studio, broadcast and live
high fidelity solutions featuring uncompressed, multichannel, and low latency audio.
With several hardware options for IO and real-time audio processing, it can be configured in different ways
to meet the most demanding specifications.
System Requirements
A STAGEGRID connected to a computer
At least one SoundGrid software installed (SoundGrid Studio, Multirack or eMotion LV1). SoundGrid
Studio is Windows and MAC compatible. Please consult Waves website for currently supported OS
versions and DAWs.
Ethernet Cable CAT5e/6/7. Additional details on network infrastructure can be found on Waves
website.
oCable webpage: www.waves.com/support/ethernet-cables-for-soundgrid-systems
oSwitches webpage: www.waves.com/support/network-switches-for-soundgrid-systems
For your convenience, register your SoundGrid product at the Waves website and receive exclusive offers for
SoundGrid system owners.

4 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
HARDWARE
Package contents
1. One STAGEGRID 4000
2. Two power cords
3. One Safety Instructions Guide
4. One serial number label
The label can be used on the appropriate space on the back panel
of the device.
For future reference, take note of the Serial number:
S/N: _____________________

5 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Rack Installation
STAGEGRID 4000 is a standard 19" rack equipment with four RU in
height.
A fan at the rear panel provides proper cooling for the unit. The air
exits the enclosure through front and sides. Do not obstruct the air
low.
To ensure that the equipment operates over the full rated
temperature range, it is necessary to observe a distance of one rack
unit from other equipment.
If more than one STAGEGRID 4000 is used, it is possible to group two
units together, as shown in the figure.
Regularly clean the dust filter located on top of the fan without using water or any other liquid. If
replacement is required, a 45ppi filter should be used.

6 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Setups
Studio
The simplest application is to use the STAGEGRID as an audio interface for a native DAW.
Using SoundGrid driver, all channels will be seen as a local interface and the control panel will allow you to
set all equipment parameters.
1. STAGEGRID 4000
2. Host

7 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Live
Adding a Waves Server, all real-time processing is offloaded from the host computer, allowing more power
demanding applications.
With eMotion LV1 on the Host computer, this setup is a complete 32-channel mixing console totally
controlled by software. It is a light, flexible and powerful mixing console with up to eight plugins per channel.
1. STAGEGRID 4000
2. Waves Server One
3. Network Switch
4. Host Laptop

8 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Large PA
To increase channels count, more STAGEGRID 4000 can be added to the system, by using network switches,
the solution can be distributed according to the size of the event.
In this example, besides dividing the system between stage and house mix position, two servers are used
together for redundancy, significantly increasing fault tolerance.
1. STAGEGRID 4000 (4x)

9 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
2. Network Switch (2x)
3. Waves Extreme Server (2x)
4. Host and Recording
5. Control surface (1x - optional)

10 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Front Panel
1. 32 mic/line inputs
2. 16 line outputs
3. 4 AES/EBU stereo inputs
4. 4 AES/EBU stereo outputs
5. 2 Headphones
6. Word Clock IN and OUT
7. Reset button
8. Network LEDs:
a. NET –SoundGrid network status
Blue: Synchronized with a SoundGrid Host application
Red: no SoundGrid sync

11 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Yellow: Firmware update
White: Unit malfunction
Cycling colors: Used to identify the equipment
b. LINK –Ethernet status
Green: Link up
Blink: Link up and network activity
Off: Link down
9. SoundGrid Gigabit Ethernet port
10.Power status LEDs
a. POWER A e B
Green: Power OK
Red: Power fail

12 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Back Panel
1. Device fan. Air flows from the back to front and sides.
2. Power A ON/OFF switch
3. Power A inlet
4. Power B inlet
5. Power B ON/OFF switch

13 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
SOFTWARE
In order to use STAGEGRID 4000 it is necessary to install a Waves SoundGrid application and the device
drivers.
The installation of these features is done through Waves Central, a platform for managing user resources
and licenses to be installed on the computer. The Waves Central can be found at
www.waves.com/downloads/central.

14 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
After identifying your Waves user, follow the steps:
1. Select “INSTALL”
2. Select “Online”
3. Search for “STAGEGRID”
4. Add STAGEGRID to Selected products
5. Start Install

15 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Together with the device drivers, SoundGrid Studio application is downloaded and installed.
Run SoundGrid Studio and:
1. Select SETUP tab
2. Select SYSTEM INVENTORY
3. At Rack A, add SoundGrid IO devices

16 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
4. Select Add Device-> Network Devices->SG4000 to allocate STAGEGRID 4000
After adding a STAGEGRID to system inventory, the following screen will be created:
1. FW: To perform a device Firmware update (check “Firmware Update”for detailed procedure)
Blue: New firmware available
Red: New mandatory firmware available
Grey: Firmware up-to-date.
2. ID: Physically identify the device by cycling NET LED colors.
3. Gear: To access device control panel
Control Panel
Control panel has five tabs:
About: Device description
System: System details
Clock: Clock setup
Input: Input ports setup
Output: Output ports setup

17 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Input tab
1. Selected channel group
2. Navigation arrows between channel groups
3. Detailed output VU meter
4. Preamp gain control fader -4 a 60dB
5. Channel Phantom Power enabling button

18 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
AES Input tab
1. SYNC: AES/EBU operation status:
oGreen: synchronized
oOrange: clock slip. Same sample rate but non-identical clock.
oRed: different Sample Rate
oGrey: no signal

19 of 26 STAGEGRID 4000 User Guide rev.01 abr-18
Output Tab
1. Selected channel group
2. Navigation arrows between channel groups
3. Detailed output VU meter