Wayfair Bar stool Black bonded leather User manual

For assistance with assembly contact:
Wayfair Customer Service,
877-WAYFAIR (877-929-3247)
www.wayfair.com
bar stool -Black bonded leather
bar stool -Red bonded leather
bar stool -White bonded leather
Assembly Instructions

A Quantity
of 1
Back Panel
B Quantity
of 1
Seat
C Quantity
of 1
Front Rail
DQuantity
of 1
Right Facing Side Rail
E Quantity
Of 1
Left Facing Side Rail
F Quantity
Of 1
Right Facing Leg
GQuantity
of 1
Left Facing Leg
Before beginning assembly, separate all parts and carefully study the parts diagrams below.
Review all parts and hardware before disposing of any packaging.
You may receive extra hardware with your unit.
Call Customer Service for missing hardware.
BAR STOOL
Parts List

1 Quantity
of 6
Short Bolt ∅5/16*2”L
2 Quantity
of 4
Long Bolt ∅5/16*3-3/4”L
3 Quantity
of 6
Screw M4*1-3/4”L
4 Quantity
of 10
Flat Washer
5 Quantity
of 10
Spring Washer
6 Quantity
of 1
Allen Wrench
Care and Cleaning Instructions:
Please see care and cleaning label attached to bottom
of chair seat.
For replacement parts or questions, please
call Customer Service at 877-WAYFAIR
(877-929-3247).

Figure 1
Unpack and lay parts on a clean,
padded surface like carpet or a
blanket. Check that you have all
parts indicated on the front page.
Lift the Velcro strip from the
bottom of the Seat (B).
Figure 2
Attach Seat (B) to Back Panel (A)
with a Short Bolt (1), Spring
Washer (5) and Flat Washer (4).
Tighten them using Allen wrench
(6) as shown in Figure 2.
Figure 3
Insert a Long Bolt (2),
Flat Washer (4) and Spring
Washer (5) into the Seat (B) using
the corner pre-hole.
Tighten the Long Bolt (2) using
the Allen wrench (6) as shown in
Figure 3.
Assembly Instructions
A
4
51
6
B
BAR STOOL

Figure 4
Attach the Right Facing Leg (F)
and Left Facing Leg (G) to the
Seat (B) as shown in Figure 4.
Figure 5
Insert the Front Rail (C), Right
Facing Side Rail (D) and Left
Facing side Rail (E) into the holes
on the Right Facing Leg (F), Left
Facing Leg (G) and Back Panel (A)
as shown in Figure 5.
Figure 6
Use a Short Bolt (1) with a
Flat Washer (4) and Spring
Washer (5) to connect the Right
Facing Leg (F) and Left Facing Leg
(G) to the Seat (B).
Tighten the Short Bolt (1) using
the Allen Wrench (6) as shown in
Figure 6.
Assembly Instructions
F
G
D
C
E
A
B
BAR STOOL

Figure 7
Use Screws (3) to connect the
Front Rail (C), Right Facing Side
Rail (D) and Left Facing Side Rail
(E) to the Right Facing Leg (F),
Left Facing Leg (G) and Back
Panel (A).
Tighten Screws (3) using a
screwdriver (not included).
Figure 8
Close the Velcro strip along the
bottom of the Seat (B).
Figure 9
Recheck that all bolts are securely
tightened.
Turn over the Barstool.
Now your Barstool is ready to use!
Assembly Instructions
G
E
BAR STOOL