Wayfair Bed User manual

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 1
Bed
Product Instructions for:

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 2
Bed
Before beginning assembly, separate all parts and carefully study the parts
diagrams below. Review all parts and hardware before disposing of any
packaging. You may receive extra hardware with your unit. Call Customer
Service for missing hardware.
A: Headboard (1)
B: Rail (2)
C: Footboard (1)
D: Support Rail (1)
E: Support Slats (1)
F: Leg (4)
G: Support Leg (2)
1: Allen Wrench (1)
2: Tooth Lock Washer (4)
3: Bolt Dia. 1/4”x1-1/4”L (8)
4: Spring Washer (4)
5: Flat Washer (4)
Parts List

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 3
Bed
Figure 1
Step 1
Place a Tooth Lock Washer
(2) onto the bolt on each Leg
(F). Then, attach Legs (F)
and Tooth Lock Washers (2)
to Headboard (A) by inserting
Legs (F) into the predrilled
holes on Headboard (A) and
rotating clockwise until Legs
(F) are tight.
Figure 2
Step 2
Place a Tooth Lock Washer
(2) onto the bolt on each Leg
(F). Then, attach Legs (F)
and Tooth Lock Washers (2)
to Footboard (C) by inserting
Legs (F) into the predrilled
holes on Footboard (C) and
rotating clockwise until Legs
(F) are tight.
Assembly Instructions
2F
A
2
F
C

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 4
Figure 3
Step 3
Attach Rails (B) to connect
Headboard (A) and
Footboard (C) as shown in
Figure 3.
Figure 4
Step 4
Attach Support Legs (G) to
Support Rail (D) by inserting
bolts of Legs (G) into
predrilled holes. Rotate
Support Legs (G) clockwise
until tight.
B
A
C
D
G

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 5
Figure 5
Step 5
Use Bolts (3), Spring
Washers (4) and Flat
Washers (5) to connect
Support Rail (D) to
Headboard (A) and Footboard
(C) as shown in Figure 5.
Tighten Bolts (3) using Allen
Wrench (1).
E
Figure 6
Step 6
Put the Support Slats (E) onto
the bed frame.
Use Bolts (3) to connect the
Support Slats (E) to Rails (B).
Tighten Bolts (3) using Allen
Wrench (1).
3
1
4
5
3
1
3
1

For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 6
Figure 7
Step 7
Now your King Upholstered
Bed 2 is ready to use!