Waysion Q7 User manual

FCC ID: 2ACHTQ7S
1
Q7User Manual
Ver:001

FCC ID: 2ACHTQ7S
2
Amendment Records
Product
name
Version
number
Person in
charge
Establish/
amend date
Reason for
change
The major change contents
Q7
001
Deng
Qingwei
2018-12-25
N/A
New updates
Note:
1. Please fill the form if there is any update.
2. For the first time saving the file, note “N/A”in the “reason for change”and “major change contents”
line.

FCC ID: 2ACHTQ7S
3
Safety maintenance:
Please maintain your system properly to make sure its service life and reduce the
damage risk.
It should avoid the humidity and extreme temperature when beingused.
Avoid prolonged exposure of the unit to direct sunlight or strong ultraviolet light.
Do not drop the unit or let it be in any place with severe shock /vibration.
Please avoid the collision as the LCD screen is very easy to be scratched. Do not
use any sharp object to touch thescreen.
To clean the device housing, please turn off the power, unplug the power cord,
scrub / wipe with slightly damp soft cloth. When cleaning the screen, please
wipe with the lint free soft cloth.
Never attempt to disassemble or repair the machine, otherwise the unit may
bedamaged.
Do not place your unit or accessories together with other flammable liquids,
gases, or other explosive materials, to avoiddanger.
Please unplug the power plug and remove the built-in battery if you do not
intend to use the device for a long time or in case of thunder weather.

FCC ID: 2ACHTQ7S
4
Contents
1.Product Description
1-1 Brief Introduction
1-2 Optional Functions
1-3 Basic Parameters
2. Structure Function Explanation
3. Extended Cable Definition
3-1 Serial Port
3-2 OBD_DEMO（optional）
3-3 GPIO_DEMO Interface
3-4 ACC
4. Micro SIM Card & Memory Card Instructions
5. Basic Operation
5-1 Click and Slide
5-2 Long-press andDrag
5-3 Delete
6.MENU
6-1 Icon Bar
6-2 Menu Setting
6-3 NFC
7. Accessories
7-1 Standard accessories
7-2 optionalaccessories
8. Update firmware
8-1 Install QFIL tools and plug-ins
8-2Update
9. Trouble Shooting
10.FCC statements

FCC ID: 2ACHTQ7S
5
1.Product Description
1-1Brief Introduction
●7" Digital touch wide screen, 1280×800 physical resolution;
●Comply with IP 65 rating;
●Android 7.1.2 operation system;
●Micro SD (TF) card storage.
1-2Optional Functions
●NFC (built-inNXP PN7150);
●Camera (built-in) 2.0MP front camera, 5.0MP rear camera;
●Docking station.
1-3 Basic Parameters
Specifications
Parameters
Core
Processor
Qualcomm Quad cord 1.1GHz processor 4*ARM Cortex-A7
Graphic
Integrated Adreno 304 GPU, up to 400MHz
RAM
1GB DDR3 (2GB DDR3 optional)
ROM
8GB EMMC Flash(16GB optional)
OS
Android 7.1.2
Display
LCD panel
7 inch TFT-LCD, LED backlight
Resolution
800 ×1280
Brightness
300nits(typical)
Contrast Ratio
800:1
View Angle (º)
80/80(L/R), 80/80(U/D)
Touch panel
G+G multi-touch capacitive touch panel
Wireless
Wi-Fi
IEEE 802.11a\b\g\n 2.4GHz&5GHz
Bluetooth
Class 2, Ver 4.0 (optional)
Optional
Function
Camera
2.0MP CMOS front camera
5.0MP CMOS rear camera
NFC
Built-in
G-sensor
Built-in
light sensor
Built-in
Compass
Built-in
Gyroscope
Built-in
speaker
Built-in stereo speaker
Multimedia
Video
Encode: 30fps 720P (H.264), 30fps WVGA(MPEG-4/VP8)
Audio
MP3/AAC/AAC+/eAAC/AMR-NB/-WB/G.711/WMA 9/10 Pro
User
Interface
Onboard I/O
ports
1 x TF card slot
1 x SIM card slot
1 x OTG (mini-AB type)
1 x Combo Audio Jack(audio+mic)
Extended I/O
ports
(on pigtail cable)
1 x POGO PIN （optional）
1 x RS422(RS485 optional)
1x OBDII (Share the same interface with RS232,OBDII serialport
will be occupied)

FCC ID: 2ACHTQ7S
6
1 x J1939（optional）
4 X GPIO(INPUT*2/OUTPUT*2)
1 x DC in(9~36V)
1 x ACC Input
Function Key
Power, Menu, Home, Return
Power light
LED light
Power Supply
DC In
12V DC (9~36V)
Battery
3.7V 5000mAh, Poly-lion( run-time up to 3 hours)
Power
Consumption
Normal mode
≤6W
Charging mode
≤8W
Environment
Operating Temp.
-10°C ~55°C (w/ battery)
-10°C ~70°C (w/o battery)
Storage Temp.
-20°C ~ 80°C (w/ battery)
IP Rating
IP65
Mechanical
Dimensions
200W x130H x 20D mm
Weight
0.47kg
Accessories
Pigtail Cable
DC in, ACC, GPIO X4, OBDX 1, RS422x1, RS232\OBDII（optional）
Charger
AC adaptor or car power adaptor
Mounting
Portable vehicle mounted Bracket or75mm VESA Bracket

FCC ID: 2ACHTQ7S
7
2.Structure Function:
2-1 Overview
2-2 Docking station

FCC ID: 2ACHTQ7S
8
3.Extended Cable Definition
●CONN1:20PIN
●CONN2:RS232
●CONN3:RS422
●CONN4:GPIO
●CONN5:DC IN
●CONN6:ACC

FCC ID: 2ACHTQ7S
9
3-1 Serial Port
3-1-1 RS232 test：
Use the converter from USB to RS422 to connect device with computer, open the serial
port debugging tool, set up the serial port tool parameter according to the serial port
number in the setting.
Open the Serial Port API Sample, set the parameter: Click Setup →Device →
/dev/ttyHSL0,Baud→115200 and return.
Click Console, press digital 11, and click send. The serial port debugging tool receiving
box will show the information;
Press digital 11 in the computer serial port debugging tool, the device will receive the
information successfully.
3-1-2 RS422 test：
Use the converter from USB to RS422 to connect device with computer, open the serial
port debugging tool, set up the serial port tool parameter according to the serial port
number in the setting.
Open the Serial Port API Sample, set the parameter: Click Setup→Device→
/dev/ttyHSL1,Baud→9600 and return.
Click Console, press digital 11, and click send. The serial port debugging tool receiving
box will show the information;
Press digital 11 in the computer serial port debugging tool, the device will receive the
information successfully.
3-1-3 RS485 test（optional）：
Use the converter from USB to RS485, the rest operation is the same as RS422 test.
3-2 OBD_DEMO（optional）
3-2-1 OBD Interface as shown:

FCC ID: 2ACHTQ7S
10
3-3 GPIO_DEMO Interface
3-3-1 GpioJni Demo as shown below
3-3-2 The file system path of the gpio port corresponding device node folder.
GPIO Interface
Yellow
Red
White
Green
Black
IN/OUT
Input 1
Input 2
Output 1
Output 2
GND
GpioJniDemo
Gpio14
Gpio58
Gpio68
Gpio88
The path of the Gpio68 node in the folder is: /sys/class/gpio/gpio979/
The path of the Gpio58 node in the folder is: /sys/class/gpio/gpio969/
The path of the Gpio88 node in the folder is: /sys/class/gpio/gpio999/
The path of the Gpio14 node in the folder is: /sys/class/gpio/gpio925/
3-3-3. How to read or set the value of gpio port.
READ: Read the value directly within the device node folder, function is asfollows, please refer to the usage
within demo for more details.
public String gpioReadStateOne(String state)
Read the data: ON ----the gpio port input is low level
OFF----the gpio port input is high level
SETTING: Write the value directly within the device node folder, function is asfollows, please refer to the
usage within demo for more details.
public boolean gpioSetStateOne(String name, int state)
Set a value: ON----set the gpio port output as high level
OFF---set the gpio port output as low level
GPIO：Input Voltage range: 0-3.3V ; output Voltage range:0-3.3V
3-4ACC
3-4-1 ACC Connection Instruction：
connecting the tablet with vehicle power supply through extended cable or docking station, and
connecting ACC wire on extended cable of the tablet with ACC of vehicle.
ACC wire：

FCC ID: 2ACHTQ7S
11
3-4-2 ACC Setting Path：Click Settings→ACC→Enabled
3-4-3 ACCFunctions
●Light up the screen by ACC powered
●Close the screen by ACC outage
Note: For the above-mentioned ACC powered and outage, that means level edge trigger, but not trigger
when ACC at high level or low level.
4.Micro SIM Card & Memory Card Instructions
●In order to avoid damaging of the 3G/4G card & memory card, please insert the card
smoothly and push slightly before you draw it out.
●The memory card will be heated after long time working.
●If you don’t correctly use the memory card or cut the power when it is being read,
maybe some data will be damaged.
●If you don’t correctly use 3G/4G card or cut the power when it is being read, the
network will be interrupted.
●If you do not use Micro SD card for a long time, please put it into packing box.

FCC ID: 2ACHTQ7S
12
5.Basic Operation
5-1 Click and Slide:
5-2 Long-press and Drag
5-3 Delete
5-3-1 DeleteIcon
Long-press the application icon, and drag to the Home screen, then drop to the‘X’
，lift-up to delete this Icon。
5-3-2 Delete APK：
Long-press the application icon, and drag to the Home screen, then drop to the recycle
，lift-up to delete this software。

FCC ID: 2ACHTQ7S
13
6.MENU
6-1 Icon Bar
Icon bar shows on the top of screen：
6-2 Menu Setting
6.2.1 Press menu on screen to pop-up options,
Click “Wallpaper”to launchwallpaper.
6.2.2 Click to enter application list.

FCC ID: 2ACHTQ7S
14
6.2.2.1 Apps will be displayed in theapplication
listafterinstalled. Click related icon to enter
application.
6.2.3 Drop down from the top of the screen to
enternotification bar.
6.2.3.1The notification bar shows system,
running anderror notice.
6.2.4 Click”Settings”to launch setting in the
applicationlist
6.2.4.1 Setting according to users’needs. Click
search iconto search function options on the
upper rightcorner of screen.
6.2.4.2 To set Wi-Fi, Bluetooth, mobile network
andother functions in “Wireless & networks”
option.

FCC ID: 2ACHTQ7S
15
6.2.4.3 To view and set brightness, sleep time,
font,rotation, notification, TF card, USB flash disk
andother functions in “Device”option.
6.2.4.4 Tomanage position, screen lock, password,
account, language, input and other
functionsin ”Personal”option.
6.2.4.5 When unrecovered problems
occurred, try to click“Backup & reset”and
“Factory data reset”thenfollow the
instructions. Device will deletesettings and
applications after restart, andrestore to
factory defaults.
(Please backup all important files before
reset.Otherwise files will be deleted
automatically andrestore to factory
defaults.)

FCC ID: 2ACHTQ7S
16
6.2.4.6 To set date & time and accessibility
in ”System”option; Do NOT operate if
unfamiliar with’’Developer options”.
6-3 NFC（optional）
6-3-1 NFC Setting Path：Click Settings→More→NFC→Open
Photo 1 Photo 2
When the NFC is activated, put the NFC card in the tagging area (as Photo 4). If the card is recognized,
and will hear the warning tone. If the card contains the information (such as the manufacturer’s
information). Photo 5 will pop up. Photo 6 is the information of NFC card. ( Notice: If the card is
recognized, it will not always pop up a box, but it should have warning tone.)
Photo 4 Photo 5 Photo 6

FCC ID: 2ACHTQ7S
17
7.Accessories
7-1 Standard accessories:
●DC 12V adapter 1pcs
7-2 optionalaccessories:
●Extended cable : DC+ACC+GPIO+RS422 +RS232(OBD optional)
●Docking station : Docking+ DC+ACC+GPIO+RS422 +RS232(OBD optional)
●OTG cable
●Mini USB cable
8.Update firmware
8-1Install QFIL tools and plug-ins
8-2 Update:
8-2-1 Run the QFIL on the compute, use the Mini USB cable to connect with Q7
8-2-2 The device turns on, and can recognize the USB COM（④）, follow the steps 1-2-3-5
8-2-3 The device can not turn on, can not recognize the USB COM, follow steps 1-2-3-4-5, open the rear
housing and long press update button on PCB.
8-2-4 Win7&8 need update usb drive：(SC20_Signed_USB_Driver_Win7&8_20170424)
Note: Due to constant effort to improve products and productfeatures, specifications may change without
prior notice.

FCC ID: 2ACHTQ7S
18
9.Trouble Shooting
9-1 Power Problem Cannot boot up
●Wrong cable connection:
Connect Extended cable with device first, and connect the AC end of DC adapter with DC
input port of Extended cable, then the other end of DC adapter connect with power plug
socket.
●Bad connection:
Check every connection and socket of power source.
9-2 Screen Problem
●No picture on screen.
●The application reaction time is too long and cannot be activated when
clicked.
●The image appears delay or still when switching.
Please restart your system if the device has any problem as describedabove.
●Display screen is misty.
Please check whether the display screen surface has dust filth or not. Please
simply wipe with clean and soft cloth.
Note: Due to constant effort to improve products and productfeatures,
specifications may change without prior notice.

FCC ID: 2ACHTQ7S
19
10.FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions:
(1) this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that maycause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or TV interference causedby unauthorized
modifications or changes to this equipment. Such modifications or changes could void theuser’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device,
pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection
against harmful interference in aresidential installation. This equipment generates uses and can radiate
radiofrequency energy and, if not installed and used in accordance with the instructions,may cause
harmful interference to radio communications. However, there is noguarantee that interference will
not occur in a particular installation. If thisequipment does cause harmful interference to radio or
television reception, whichcan be determined by turning the equipment off and on, the user is
encouraged totry to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which thereceiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Devicetypes Panasonic ELUGA
Ray 600 (FCC ID: 2ACHTQ7S) has also been tested against this SAR limit.The highest SAR value reported
under this standard during product certification foruse when properly worn on the body is 0.955W/kg.
This device was tested fortypical body‐worn operations with the back of the handset kept 0mm from
the body.To maintain compliance with FCC RF exposure requirements, use accessories thatmaintain a
0mm separation distance between the user's body and the back of thehandset.