WayteQ N410 User manual

WayteQ N410 GPS Navigator
Owner’s Manual
English Version
1
WayteQ Technology

2
WayteQ Technology
Precaution and Notice.......................................................................................................................3
In the Box..........................................................................................................................................3
A. Basic Operation............................................................................................................................4
1. Understanding Product Components.....................................................................................4
1.1 Front components........................................................................................................4
1.2 Back components........................................................................................................4
1.3 Top components..........................................................................................................4
1.4 Left-side components .................................................................................................5
1.5 Right-side components................................................................................................6
1.6 Bottom components ....................................................................................................6
2. Accessory Operations............................................................................................................6
2.1Charging by AC adapter...............................................................................................6
2.2 Charging by Car Adapter.............................................................................................7
2.3 Install the cradle and Car Mount.................................................................................7
3. GPS Initial Start Up ..........................................................................................................8
B Functions Operation......................................................................................................................9
Powering On & Off...................................................................................................................9
Main Interface...........................................................................................................................9
1. Navigation...............................................................................................................10
2. Music.......................................................................................................................10
3. Photo .......................................................................................................................11
4. E Book.....................................................................................................................13
5. Video .......................................................................................................................14
6. Setup .......................................................................................................................15

3
WayteQ Technology
Precaution and Notice
¾The PND is used only as a navigation aid. It is not for precise measurement of direction,
distance, location or topography. The user must follow all traffic signs and local regulations
along the roads.
¾GPS satellite signals cannot pass through solid materials (except glass). When you are inside
a tunnel or building, GPS position is not available.
¾A minimum of 4 GPS satellite signals are needed to determine current location. Signal
reception can be affected by situations such as bad weather or dense overhead obstacles (e.g.
tall buildings).
¾Other wireless devices in the vehicle might interfere with the reception of satellite signals and
cause the reception to be unstable.
¾In case the screen of PND is frozen, you should set the “battery switch” on the rear side to
“off “. If the PDN still not responsive, press the small reset button on the bottom.
¾When you get out of the car, do not leave your PND on the dashboard or subject to direct
sunlight. The overheating of the battery may cause malfunctions and/or dangerous
conditions.
¾For your own safety, do not operate the controls of the PND while driving. Do not mount
where the driver’s field of vision is blocked
In the Box
In the box you will find
Portable navigation device (PND) SD memory card (Plugged in the unit)*
AC adapter Car adapter
Car mount system Carry case*
Owner’s manual Software manual*
USB cable to connect to your PC Warranty Card*
* optional accessories

A. Basic Operation
1. Understanding Product Components
1.1 Front components
Touch Screen
Charge Indication
1.2 Back components
Speaker
1.3 Top components
4
WayteQ Technology

Menu Power
1.4 Left-side components
Reset Button
If the system is not responsive
and cannot power off even
when the power key is
pressed, press this button (by
using a pin or paperclip) to
Mini-USB Port
Use it to connect computer for
data transmission.
Earphone Socket
SD/MMC Slot
Inbuilt with a memory card,
including the programs and
maps necessary for the
system, do not remove during
use.
Installing the SD Memory Card
¾The SD memory card contains the map data required by the PND. It is supplied already
placed into the slot on the side of the PND.
¾Once the card is installed, it can not be removed during the operation of the device.
¾If you need to remove the card, switch the unit off first, push the card in and it will eject from
the slot.
¾When re-installing it can only be inserted one way, with the contacts away from you and the
cut-off corner at the bottom as shown. Slide the card in and push fully so that it locks in
place.
¾This card cannot be used to Store MUSIC and VIDEO files. Please use another SD card to
do this and exchange them as necessary.
¾The provided SD card is defaulted as “lock". You have to set as "unlock" before reading it.
5
WayteQ Technology

1.5 Right-side components
Battery Switch
1. On：Battery is on, the device works normally. Please insure this status when you are using
this device.
2. Off：Battery is off, the device doesn’t work.
1.6 Bottom components
6
WayteQ Technology
Power Socket
Pen
With this you can select and interact
with the touch screen. Remember to
return it to it’s holder when finished.
Volume Button
Battery Switch
External Antenna
2. Accessory Operations
2.1Charging byAC adapter
¾Before using your PND the battery will need to be fully charged. To maximize the life of the
battery the first charge must be a full charge of the battery.
¾We recommend that you charge the unit for 12 hours in order to achieve the full charge.
Subsequent charge times may be shorter.
¾Plug the mains adapter into the socket on the rear of the unit marked 5V.
¾Plug the adapter into the main supply.

¾The red charging indicator on the front of the unit will light. When the unit is fully charged
the red indicator will go out.
7
WayteQ Technology
2.2 Charging by CarAdapter
¾When using your PND in the car we recommend that you always use the car adapter to power
the unit, especially on long journeys.
¾Plug the car adapter into the socket marked 5V on the rear of the unit. Plug the other end on
the adapter into the car’s 12V accessory socket.
¾If possible fix the power cable so that it does not obscure instruments or controls.
2.3 Install the Cradle and Car Mount
¾Install car Mount System

Step1: Rotate screw
to lock onto car glass
Step2: Install the holder into the
Car cradle by the sockets
lk l
Use the two screw to adjust the
angle and direction of the PND
¾Install PND into the holder
2.4 USB Cable usage
¾The USB cable is provided for system upgrades and battery charging . This USB cable will
work on the PC either with Microsoft Active Sync® or as a mess storage media. You can
select the mode in the “Setup-Sys Info” menu.
¾For updated and more information about Microsoft Active Sync, please visit the Microsoft
website.
3. GPS Initial Start Up
First start up should be in an open location without obstructions.
Hold still while getting up to 4 GPS satellite signals. Then you can program your trip.
Note:
8
WayteQ Technology

There are various ways for searching a location on the map or planning your routing, See
Navigation user manual which guides you through the process of running this function in detail.
B. Functions Operation
Powering On & Off
（1）Press the “Power” button to power the equipment on and you can see the power-on image as
shown below. Press the “Power” button again to turn the unit off.
Main Interface
9
WayteQ Technology

1. Navigation
Tap the “Navigation” icon to enter the navigation function interfaces. Refer to the Navigation
software and Map usage from the user manual.
2. Music
1. Tap ”Music” icon on the main interface to enter the music playback function as the
interface of document list:
2. Tap the file you want to choose to enter the following interface:
Random
Repeat
File shift
10
WayteQ Technology

Tap the REPEAT icon to repeat the selected file.
Tap the RANDOM icon to randomly play the files loaded on the card.
Tap” Next” to play the next file and Tap “Previous” to play the previous piece of music.
Tap the “X” to return the of file list interface.
3. Photo
1. Tap the “photo” icon on the main interface to enter the picture browse function as the
interface of document list:
2. Double click on the file name to enter the following interface:
11
WayteQ Technology

Previous
Next
File shift Full Screen
Document Name
3. Tap “Previous” button to display the previous picture, tap “Next” button to display the next
picture.
4. Tap “Full Screen” button to display the picture in full screen as follows:
5. The picture will be displayed automatically at full screen mode, and tap the screen to return
to the following interface:
12
WayteQ Technology

6. Tap the “X” to return the of image list interface.
4. E Book
1. Tap the “E-book” icon on the main interface to enter the electronic book function as the
interface of document list:
2. Tap on the document with the touch pen to enter the following interface:
Document shift
Document Name
Page select
Current Page/ Total Page
3. Tap “Previous Page” button to turn to the previous page and tap “Next Page” to turn to the
next page.
4. Tap “Page select” button to choose the page which you want
13
WayteQ Technology

5. Tap the “X” to return the of E Book list interface.
5. Video
1. Tap “Video” icon on the main interface to enter the Video playback function as the interface
of document list:
14
WayteQ Technology

2. Tap the movie file you want to choose with the touch panel start to play the movie
Full Screen
File shift
15
WayteQ Technology
3. Tap “Full Screen” button to play the movie in full screen.
Progress
4. During play in full screen, tap the screen to return to the interface above.
6. Setup
1. Tap the setup icon of the system to enter the Setup main list as the following interface:

2. Tap the “Volume” button to enter the interface of sound setting as follows:
3. Tap the “Power” button to enter the interface of power setting as follow:
4. Tap the “Backlight” button to enter the interface of backlight setting as follow:
16
WayteQ Technology

In the “Back Light” menu, choose the left button to decrease the brightness gradually,
choose the right button to increase the brightness gradually.
5. Tap the “Date & Time” button to enter the setting interface to adjust the date & time,as
follows:
17
WayteQ Technology

6. Tap the “Skin” button to enter the interface of language and skin settings as follows:
7. Tap the “System Information” button to enter the interface of the system information setting
as follows:
¾Tap the “USB” to set the USB working mode.
18
WayteQ Technology

¾You can calibrate the touch screen if it is not responding accurately to your stylus taps.
1. Tap the Calibration button on the System info. Screen.
2. Tap to the calibration indicated on the screen.
3. Tap and hold at the center of the target.
4. When the target moves to another position, tap and hold at the center of the new
target.
5. Repeat each time to complete the calibration process. When completed, tap
screen to return to the Settings screen.
This document is for guidance only and does not form part of any contract, and may be
subject to change without notice.
19
WayteQ Technology