WayteQ WayteQx995 User manual

WayteQx995 GPS navigation
Quick guide
EN

2
1. WARNINGS AND NOTES
 This device is only for helping navigation on the road,
cannot be used for precise direction and distant
measuring.
 The planned route is only a suggestion. It is the
responsibility of the user to observe traffic rules,
signs on signboards and roads and signs of signaling
lamps.
Don’t try to repair the device by yourself. Don’t try to open
or disassemble the product. Don’t try to modify the
software of the device. Don’t use any software with the
device that is illegal or not compatible with it. If any fault
happens because of those mentioned above mentioned is
not observed it can invalidate the warranty.
Removing or harming the warranty label placed on the
device can also invalidate warranty.

3
2. TECHNICAL SPECIFICATION
CPU MediaTek MTK8127
RAM memory 1 GB
Internal flash 8 GB
LCD screen 5” TFT LCD, 800x480 pixel
Memory Extensibility microSD memory card, max. 32
GB
USB Mini USB connector
Speaker Integrated
Headphone output 2.5 mm stereo jack
GPS receiver MT6627
Battery Built-in, Lithium-Ion
Charging current DC 5V / 2 A
Car charger DC 12-24V/2.5A – 5V/2A
Operating system Android 4.4.2
Navigation software Optional
FM Transmitter Integrated
Bluetooth
speakerphone Supported
Operating conditions
5°C ~ 40°C operating
-10°C ~ 50°C storage
86KPa ~ 106KPa atmospherical
pressure
35% ~ 80% RH operating
30% ~ 90% RH storage

4
3. CONTROLS
1
2
3
4
5
6
7
8
9

5
1. Notification LED
2. Earphone output
3. MicroSD memory card
4. LCD touchscreen
5. Mini USB charging and data socket
6. Power ON/OFF switch
7. Speaker
8. RESET button
9. Microphone
4. CHARGING WITH THE AC CHARGER
WARNING: During charging, the LED glows in red color. Do
not disconnect the device from the charger until charging
is complete and the LED glows in blue color. Charge the
device when the battery level is low.
Connecting the car charger
Use continuous power supply
with the supplied car charger
when the device in use.
WARNING: in order to avoid sudden power surges, attach
the device only after you have started the engine.
Indicator of the fully charged battery.
Battery
The device can be operated between 5 - 40°C, and it can
be stored safely between-10 - 50°C. Do not expose the

6
device to high temperatures or hot environment for a
prolonged time. For example do not leave the device
exposed to direct sunlight in the car. To avoid damage to
the device, keep it away from harsh environment.
Please follow the local guidelines and regulations before
you dispose the battery.
5. USING THE DEVICE
5.1Turn ON/OFF
In order to turn on the device, press the POWER button for
3 seconds. You will see the following screen when the
system is started and it is ready to use:

7
Main functions:
 Navigation application launcher
 Music/Video playback, photo viewer
 Application list
 FM transmitter
 File manager
 Calculator
 GPS receiver status and information
 Settings
In order to turn off the device: press and hold the POWER
button for 2 seconds. A dialog boksz will appear. Select
“Power off” menu item to safely shut down the device.
5.2Status bar
At the bottom and top of thes creen, the status bar
contains the following icons: Back, Home, Recently viewed
applications, Volume up/down adjustments. It also
displays current time, Wi-Fi status, Bluetooth status,
Battery level and other notifications.
On any functional screen, tap this icon to go
back one screen or exit application.
On any functional screen, tap this icon to go to
the Home screen

8
Shows a list of thumbnail images of
applications you’ve recently opened. To re-
open an application, touch its thumbnail
image. To remove a thumbnail from the list,
swipe it up or down.
Current time
Wi-Fi connection and signal strength
Battery level. It will turn orange when battery
is low and turn red when battery level is
critically low.
5.3 Navigation
After installing Sygic navigation software it is needed to
turn on Wifi function device (there is no need for Internet
connection) after turning on the device. This is because
software needs to identify the device. For that reason it is
suggested that before starting navigation software turn on
Wifi function for a couple of seconds. After this Wifi
function can be turned off. If it is not done Sygic software
won’t be loaded. If the device is not turned off and only
switched to sleep mode than suggestions above is not
needed to be done.

9
5.4 FM Transmitter
Using FM transmitter, you can wirelessly forward thesound
of the applications to your car stereo.
Tap the „Open” label. With the + and – buttons you can
choose an appropriate frequency. Tune your car stereo to
this frequency.
Remark:
You should choose a frequency which is not used in your
area to avoid any interference.
Using the FM transmitter requires a connected car charger.

10
4.4 GPS Info
With this application, you can check the status of the GPS
receiver without any navigation software.
5. DECLARATION OF COMFORMITY (ex.)
The importer states, that this product complies with the
conditions of use, and in accordance with regulations,
there is a product sticker on it, and have a warranty card
and a user’s manual in the box.
Based on a statement issued by the manufacturer, the
product will be placed on the market with CE marking.
© 2016 All Rights Reserved, WayteQ Europe Ltd.

11
6. IMPORTER / DISTRIBUTOR:
WayteQ Europe Ltd.
6th Gubacsi str.
BUDAPEST, 1097
HUNGARY
Phone: [phone]
www.wayteq.eu
[email protected]
WARNING: WayteQ reserves the right to change the user
manual without any notice. The parameters of the product
can change without any notice.

12