Wear & Hear BeHear Access ABH-120 User manual

Quick Start Guide
Model: ABH-120
For detailed, visual instructions, visit
our website www.WearAndHear.com
ŸHeadset ŸCharging cradle and cable
ŸEar bud pairs
(variety of types and sizes)
ŸEar hook pairs
(3 sizes)
ŸWind protection covers
(2 pairs)
ŸTravel pouch
Package Contents
1

Wearing Recommendations
2
ŸWhen not in use, ear buds can be
secured with magnets and rest on
your chest.
3
Ear Fittings
ŸIf the default buds and hooks are not comfortable, remove
them. Choose a different sized ear hook and attach it.
ŸReplace the ear bud, squeezing it gently to attach it to the
oval speaker.
ŸPlace foam covers for wind noise reduction (optional).

Charging the Headset
4
Purchased separately
Before the first use, charge the battery up to
3 hours until the LED indicator turns green.
ŸAlternatively, charge the
headset directly from a
wall outlet or computer
USB port.
ŸConnect charging cradle to power outlet and place
headset in the cradle.
ŸThe LED indicator is red during charging and turns green
when the headset is fully charged.
6
Manage, customize and get help for your BeHear headset
with the W&H BeHear free smartphone application.
Smartphone Application
Turning the Headset ON and OFF
5
Power button
LED indicator
1. To turn ON BeHear ACCESS
press and hold the power
button until the unit vibrates
and the LED turns light blue.
2. To turn OFF BeHear ACCESS press and hold the power
button until the unit vibrates, and the light blue LED
turns off.

3. Press the power button for about 5 seconds, until the
LED starts alternating red/blue.
4. Launch the app and follow the prompts.
5. In the W&H BeHear app locate your
BeHear ACCESS headset, followed by
its serial number, in the Available
section. Tap that entry. When pairing
is complete it will move to the
Paired section.
Connect to the Phone
7
2. If BeHear is ON, press the power button until the LED
switches off.
1. Download the W&H BeHear app from the Google Play
Store or Apple Store and install it on your phone.
Power
button
Go to iPhone “Settings” >> “Bluetooth”
and add BeHear ACCESS to “My Devices”.
For iOS (iPhone) only:
BeHear ACCESS
006104FF
BeHear NOW
00612048
BeHear ACCESS
Available
006120A5
BeHear ACCESS
Paired
Connection
12:30
Personalization
8
Adjust the acoustic performance of the headset to suit your
own personal hearing preferences.
SAVE AND APPLY
SAVE IN LIBRARY
Right Ear
Left Ear
500Hz 2kHz 4kHz1kHz 6kHz 8kHz
Normal
Mild
ModerateSevere
62
52
54
41
35
30
64
50
48
29
27
42
Assessment
Hearing Threshold
34
500Hz 2kHz 4kHz1kHz 6kHz 8kHz
2 3 4 5 6
Left Ear
Assessment SAVE
START
Conditions are good. Start
the assessment.
Low Ambient Noise
Six sounds will be played for each ear.
Move the dot on the left to the point you
first hear the sound.
Perform the assessment in a quiet
environmetn. The assessment will stop
automatically if there is too much ambient
noise.
Assessment
4
2. Choose Personal >> Assessment in
the W&H BeHear app.
3. Follow the prompts to perform the
hearing assessment.
4. Save and apply the results to the
headset.
1. Put on the headset, inserting the ear
buds.

Hearing Amplification
9
Live Hearing
Turn on hearing amplification
and adjust the volume
whenever you need it using
the RIGHT-HAND CONTROLS.
Decrease the hearing volume.
Increase the hearing volume.
Long press to toggle hearing amplification ON/OFF.
Short press to scroll through the hearing profiles.
Telecoil (T-coil) Receivers
Activate T-coil mode where
induction loops are present and
adjust the volume using the
RIGHT-HAND CONTROLS.
Decrease the volume of the T-coil receiver.
Increase the volume of the T-coil receiver.
Double press to toggle T-coil mode ON/OFF.
Short press to toggle between Exclusive and
Transparent T-coil profiles.

Phone Calls
10
Handling Phone Calls
Handle calls of a Bluetooth-connected mobile phone using
the LEFT-HAND CONTROLS.
Decrease the call volume.
Increase the call volume.
Short press to accept incoming call.
Short press to end the active call.
Long press to reject an incoming call.
Double press to redial last number.
Slow Down Speech with EasyListen™
Slow down the speed of the incoming voice during an on-
going mobile phone call using EasyListen, activated using
the RIGHT-HAND CONTROLS.
Long press to toggle EasyListen ON/OFF.
Speech tempo is set to Normal when EasyListen
is OFF.
Short press to scroll through the three tempo
options: Slow, Slower, and Slowest.

Audio Play
11
Manage Audio Play
Manage audio play from a Bluetooth-connected device using
the LEFT-HAND CONTROLS.
Decrease the volume.
Increase the volume.
Short press to toggle Play/Pause audio.
Double press to forward to the next audio track.
Triple press to return to the previous audio track.
Stay Safe and Alert with ListenThrough™
Stay alert with ListenThrough while listening to music using
the RIGHT-HAND CONTROLS.
Long press to toggle ListenThrough ON/OFF.
Decrease the volume of the ambient sound.
Increase the volume of the ambient sound.

ŸRed/blue alternating
ŸRed, steady
ŸLight blue
ŸGreen, steady
If unit is on, briefly press
power button
ŸGreen
ŸYellow
ŸRed, blinking
Indication
ŸPurple, blinking
ŸRed, blinking
Battery level:
ŸFair > 10% and < 50%
ŸBluetooth pairing mode
State
ŸDisconnected from
paired Bluetooth device,
or battery low
ŸHeadset is powered
ON/OFF (toggle)
ŸHearing function active
ŸCharging
ŸBattery fully charged
ŸGood > 50%
ŸLow < 10%
(needs charging!)
LED indicator
LED Status Indications
12
The LED indicator shows power and operation states
of the headset.
BeHear-Access-QS-Ver02
Troubleshooting
13
Not loud enough
Issue
Grayed-out Home
menu
Unexpected headset
behavior
Bluetooth
disconnects often
Hearing interruptions
Battery drains too fast
Suggestion
Headset is not connected
properly. Review section
“Connect to the Phone”
Turn off phone tones (touch
sounds, keyboard taps,
notifications)
When within range (30 ft/10 m)
place Bluetooth device on right
side of your body
Reset the headset by connecting
it to the charger
Contact our support team
In the app Home section use
the button to access the
Sound Tuning grid
U.S. & Canada
[phone] (toll free) / [e-mail]
Europe & U.K.
[phone] / [e-mail]
Contact Support
Elsewhere
[e-mail]
e-Mail us your Hearing Assessment results, and product version
info (from the Information/Version menu), if possible.
7