WEEEMAKE WeeeBot Extended Form A User manual

WeeeBot
Smart Light Robot
Extended Form A

“Smart Lamp” uses light sensor, sound
sensor as the control switch. When the
robot is in a dim light environment, RGB
LED will turn on automatically; when the
robot is in a bright light environment,
making a sound can turn on the light
and making another sound can turn off
the light.
introduction

Installation
1
1
4xScrew M4*6
2xBeam 1030-100-B
2xScrew M4*6
1x18650 Battery Holder
2

3
4
6xScrew M4*6
2xBeam 1030-100-B

5
6
2xScrew M4*6
2xNut M4

Wiring
2
1x4P4C Cable-20cm
1X Power cord
Connect to Port B

Completion Figure
3

18650 Battery Holder
RGB Ultrasonic Sensor
Wiring
4

Sample Program
5
Through judging the intensity of ray
light in the environment, if the light is
weak, turn on the bulb. If the light is
strong, the bulb is determined by the
loudness of the sound.
Through judging the loudness of a
sound in the environment，if it’s
in a loud voice, (clap hands) turn on
the bulb. If it’s in a low voice, the
bulb remains off.
At the first time people clap hands,
the variable a adds one into one. In
the case of satisfying the judgment,
turn on the bulb. At the second time
people clap hands, the variable a
adds one into two. In the case of
dissatisfying the judgment, turn off
the bulb. That is, turn on the bulb if
the value of a is an odd number. And
turn off the bulb if the value of a is an
even number.
When sound value is big, it should wait
there. It can’t run the program until
the sound value is weaker which can
exclude the conditions of repeated
judgment from one clap.
Turn on the bulb
Turn off the bulb

Through judging the intensity of ray
light in the environment, if the light is
weak, turn on the bulb. If the light is
strong, the bulb is determined by the
loudness of the sound.
Through judging the loudness of a
sound in the environment，if it’s
in a loud voice, (clap hands) turn on
the bulb. If it’s in a low voice, the
bulb remains off.
At the first time people clap hands,
the variable a adds one into one. In
the case of satisfying the judgment,
turn on the bulb. At the second time
people clap hands, the variable a
adds one into two. In the case of
dissatisfying the judgment, turn off
the bulb. That is, turn on the bulb if
the value of a is an odd number. And
turn off the bulb if the value of a is an
even number.
Manufacturer: WEEEMAKE Technology Co., Ltd
Address: No. 210-212, Building C, Shiwai TaoyuanOriginality Park, Pingshan 1st Rd,
Nanshan District,Shenzhen, Guangdong Province, China, 518000
Product Standard Code: Q/WMZX001-2018
Service Hotline: [phone]
Email: [email protected]
Website: www.weeemake.com