WEEEMAKE WeeeBot Extended Form B User manual
Distance Measuring Robot
WeeeBot Extended Form B
Distance measuring robot is using ultrasonic
sensor and mechanical parts to build a
hand-held distance measuring machine.
Introduction
Distance measuring robot is transformed from
WeeeBot coding robot car. Please disassemble
below parts from WeeeBot coding robot car,
and then follow assembly guide to build
distance measuring robot.
Disassembly
1
1
2
Wheel
Line-following Sensor
TT Motor
Tips: Please disassemble parts marked in Black line and put them back
into box; please disassemble parts marked in Blue line and keep them to
build distance measuring robot.
Plastic Caster
3
4
RGB Ultrasonic Sensor
Beam 1030-100-B
Beam 1030-100-B
Install RGB
Ultrasonic Sensor
2
2xScrew M4*6
Connect to Port B
Connect to Port C
Install Handle
3
6xScrew M4*6
1
2
3
2xBeam 1030-100-B
Completion Figure
4
Wiring
5
RGB Ultrasonic Sensor
18650 Battery Holder
LED Panel Module
Display ultrasonic detecting value on
the LED matrix panel
Turn on the RGB
Turn off the RGB
Sample Program
6
Turn on the RGB
Manufacturer: WEEEMAKE Technology Co., Ltd
Address: No. 210-212, Building C, Shiwai TaoyuanOriginality Park, Pingshan 1st
Rd, Nanshan District,Shenzhen, Guangdong Province, China, 518000
Product Standard Code: Q/WMZX001-2018
Service Hotline: +86 755 86532012
Email: [email protected]
Website: www.weeemake.com
Table of contents
Other WEEEMAKE Robotics manuals
